diff --git a/nucleo-wb55-i2c/.mxproject b/nucleo-wb55-i2c/.mxproject index c9b1eb1..69c9f2c 100644 --- a/nucleo-wb55-i2c/.mxproject +++ b/nucleo-wb55-i2c/.mxproject @@ -1,8 +1,8 @@ [PreviousLibFiles] -LibFiles=Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_crs.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_hsem.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h;Drivers/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_crs.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_hsem.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h;Drivers/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h;Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wb55xx.h;Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h;Drivers/CMSIS/Device/ST/STM32WBxx/Include/system_stm32wbxx.h;Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm35p.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_armv81mml.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/cmsis_armclang_ltm.h; +LibFiles=Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_crs.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_hsem.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h;Drivers/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_crs.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_hsem.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h;Drivers/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wb55xx.h;Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h;Drivers/CMSIS/Device/ST/STM32WBxx/Include/system_stm32wbxx.h;Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/tz_context.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/core_cm35p.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/core_armv81mml.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/cmsis_armclang_ltm.h; [PreviousUsedCubeIDEFiles] -SourceFiles=Core/Src/main.c;Core/Src/stm32wbxx_it.c;Core/Src/stm32wbxx_hal_msp.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c;Core/Src/system_stm32wbxx.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c;Core/Src/system_stm32wbxx.c;Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c;; +SourceFiles=Core/Src/main.c;Core/Src/stm32wbxx_it.c;Core/Src/stm32wbxx_hal_msp.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c;Core/Src/system_stm32wbxx.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c;Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c;Core/Src/system_stm32wbxx.c;Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c;; HeaderPath=Drivers/STM32WBxx_HAL_Driver/Inc;Drivers/STM32WBxx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32WBxx/Include;Drivers/CMSIS/Include;Core/Inc; CDefines=USE_HAL_DRIVER;STM32WB55xx;USE_HAL_DRIVER;USE_HAL_DRIVER; diff --git a/nucleo-wb55-i2c/Core/Inc/stm32wbxx_hal_conf.h b/nucleo-wb55-i2c/Core/Inc/stm32wbxx_hal_conf.h index 21923a6..c88a500 100644 --- a/nucleo-wb55-i2c/Core/Inc/stm32wbxx_hal_conf.h +++ b/nucleo-wb55-i2c/Core/Inc/stm32wbxx_hal_conf.h @@ -38,13 +38,13 @@ /*#define HAL_COMP_MODULE_ENABLED */ /*#define HAL_CRC_MODULE_ENABLED */ /*#define HAL_HSEM_MODULE_ENABLED */ -#define HAL_I2C_MODULE_ENABLED +/*#define HAL_I2C_MODULE_ENABLED */ /*#define HAL_IPCC_MODULE_ENABLED */ /*#define HAL_IRDA_MODULE_ENABLED */ /*#define HAL_IWDG_MODULE_ENABLED */ /*#define HAL_LCD_MODULE_ENABLED */ /*#define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED +/*#define HAL_PCD_MODULE_ENABLED */ /*#define HAL_PKA_MODULE_ENABLED */ /*#define HAL_QSPI_MODULE_ENABLED */ /*#define HAL_RNG_MODULE_ENABLED */ diff --git a/nucleo-wb55-i2c/Core/Src/main.c b/nucleo-wb55-i2c/Core/Src/main.c index 9c862b9..c110918 100644 --- a/nucleo-wb55-i2c/Core/Src/main.c +++ b/nucleo-wb55-i2c/Core/Src/main.c @@ -40,12 +40,8 @@ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ -I2C_HandleTypeDef hi2c1; - UART_HandleTypeDef huart1; -PCD_HandleTypeDef hpcd_USB_FS; - /* USER CODE BEGIN PV */ /* USER CODE END PV */ @@ -54,8 +50,6 @@ PCD_HandleTypeDef hpcd_USB_FS; void SystemClock_Config(void); static void MX_GPIO_Init(void); static void MX_USART1_UART_Init(void); -static void MX_USB_PCD_Init(void); -static void MX_I2C1_Init(void); /* USER CODE BEGIN PFP */ /* USER CODE END PFP */ @@ -94,8 +88,6 @@ int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_USART1_UART_Init(); - MX_USB_PCD_Init(); - MX_I2C1_Init(); /* USER CODE BEGIN 2 */ /* USER CODE END 2 */ @@ -104,6 +96,10 @@ int main(void) /* USER CODE BEGIN WHILE */ while (1) { + if (HAL_UART_Transmit(&huart1, "TEST ", 6, 100) != HAL_OK) { + Error_Handler(); + } + HAL_Delay(500); /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ @@ -121,31 +117,18 @@ void SystemClock_Config(void) RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; - /** Macro to configure the PLL multiplication factor - */ - __HAL_RCC_PLL_PLLM_CONFIG(RCC_PLLM_DIV1); - /** Macro to configure the PLL clock source - */ - __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_MSI); - /** Configure LSE Drive Capability - */ - HAL_PWR_EnableBkUpAccess(); - __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW); /** Configure the main internal regulator output voltage */ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); /** Initializes the RCC Oscillators according to the specified parameters * in the RCC_OscInitTypeDef structure. */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE - |RCC_OSCILLATORTYPE_LSE|RCC_OSCILLATORTYPE_MSI; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_MSI; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.MSIState = RCC_MSI_ON; RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; - RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_10; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { @@ -156,7 +139,7 @@ void SystemClock_Config(void) RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK4|RCC_CLOCKTYPE_HCLK2 |RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; @@ -169,16 +152,8 @@ void SystemClock_Config(void) } /** Initializes the peripherals clocks */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_USART1 - |RCC_PERIPHCLK_I2C1|RCC_PERIPHCLK_USB; - PeriphClkInitStruct.PLLSAI1.PLLN = 24; - PeriphClkInitStruct.PLLSAI1.PLLP = RCC_PLLP_DIV2; - PeriphClkInitStruct.PLLSAI1.PLLQ = RCC_PLLQ_DIV2; - PeriphClkInitStruct.PLLSAI1.PLLR = RCC_PLLR_DIV2; - PeriphClkInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_USBCLK; + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_USART1; PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2; - PeriphClkInitStruct.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1; PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSI; PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE0; if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) @@ -188,55 +163,6 @@ void SystemClock_Config(void) /* USER CODE BEGIN Smps */ /* USER CODE END Smps */ - /** Enable MSI Auto calibration - */ - HAL_RCCEx_EnableMSIPLLMode(); -} - -/** - * @brief I2C1 Initialization Function - * @param None - * @retval None - */ -static void MX_I2C1_Init(void) -{ - - /* USER CODE BEGIN I2C1_Init 0 */ - - /* USER CODE END I2C1_Init 0 */ - - /* USER CODE BEGIN I2C1_Init 1 */ - - /* USER CODE END I2C1_Init 1 */ - hi2c1.Instance = I2C1; - hi2c1.Init.Timing = 0x00707CBB; - hi2c1.Init.OwnAddress1 = 0; - hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; - hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; - hi2c1.Init.OwnAddress2 = 0; - hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK; - hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; - hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; - if (HAL_I2C_Init(&hi2c1) != HAL_OK) - { - Error_Handler(); - } - /** Configure Analogue filter - */ - if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK) - { - Error_Handler(); - } - /** Configure Digital filter - */ - if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN I2C1_Init 2 */ - - /* USER CODE END I2C1_Init 2 */ - } /** @@ -256,7 +182,7 @@ static void MX_USART1_UART_Init(void) /* USER CODE END USART1_Init 1 */ huart1.Instance = USART1; huart1.Init.BaudRate = 115200; - huart1.Init.WordLength = UART_WORDLENGTH_7B; + huart1.Init.WordLength = UART_WORDLENGTH_8B; huart1.Init.StopBits = UART_STOPBITS_1; huart1.Init.Parity = UART_PARITY_NONE; huart1.Init.Mode = UART_MODE_TX_RX; @@ -287,39 +213,6 @@ static void MX_USART1_UART_Init(void) } -/** - * @brief USB Initialization Function - * @param None - * @retval None - */ -static void MX_USB_PCD_Init(void) -{ - - /* USER CODE BEGIN USB_Init 0 */ - - /* USER CODE END USB_Init 0 */ - - /* USER CODE BEGIN USB_Init 1 */ - - /* USER CODE END USB_Init 1 */ - hpcd_USB_FS.Instance = USB; - hpcd_USB_FS.Init.dev_endpoints = 8; - hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; - hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED; - hpcd_USB_FS.Init.Sof_enable = DISABLE; - hpcd_USB_FS.Init.low_power_enable = DISABLE; - hpcd_USB_FS.Init.lpm_enable = DISABLE; - hpcd_USB_FS.Init.battery_charging_enable = DISABLE; - if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN USB_Init 2 */ - - /* USER CODE END USB_Init 2 */ - -} - /** * @brief GPIO Initialization Function * @param None @@ -351,6 +244,14 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + /*Configure GPIO pins : PA11 PA12 */ + GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + /*Configure GPIO pins : B2_Pin B3_Pin */ GPIO_InitStruct.Pin = B2_Pin|B3_Pin; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; diff --git a/nucleo-wb55-i2c/Core/Src/stm32wbxx_hal_msp.c b/nucleo-wb55-i2c/Core/Src/stm32wbxx_hal_msp.c index ec3c55e..21a7171 100644 --- a/nucleo-wb55-i2c/Core/Src/stm32wbxx_hal_msp.c +++ b/nucleo-wb55-i2c/Core/Src/stm32wbxx_hal_msp.c @@ -74,73 +74,6 @@ void HAL_MspInit(void) /* USER CODE END MspInit 1 */ } -/** -* @brief I2C MSP Initialization -* This function configures the hardware resources used in this example -* @param hi2c: I2C handle pointer -* @retval None -*/ -void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hi2c->Instance==I2C1) - { - /* USER CODE BEGIN I2C1_MspInit 0 */ - - /* USER CODE END I2C1_MspInit 0 */ - - __HAL_RCC_GPIOB_CLK_ENABLE(); - /**I2C1 GPIO Configuration - PB8 ------> I2C1_SCL - PB9 ------> I2C1_SDA - */ - GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* Peripheral clock enable */ - __HAL_RCC_I2C1_CLK_ENABLE(); - /* USER CODE BEGIN I2C1_MspInit 1 */ - - /* USER CODE END I2C1_MspInit 1 */ - } - -} - -/** -* @brief I2C MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hi2c: I2C handle pointer -* @retval None -*/ -void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) -{ - if(hi2c->Instance==I2C1) - { - /* USER CODE BEGIN I2C1_MspDeInit 0 */ - - /* USER CODE END I2C1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_I2C1_CLK_DISABLE(); - - /**I2C1 GPIO Configuration - PB8 ------> I2C1_SCL - PB9 ------> I2C1_SDA - */ - HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8); - - HAL_GPIO_DeInit(GPIOB, GPIO_PIN_9); - - /* USER CODE BEGIN I2C1_MspDeInit 1 */ - - /* USER CODE END I2C1_MspDeInit 1 */ - } - -} - /** * @brief UART MSP Initialization * This function configures the hardware resources used in this example @@ -165,7 +98,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart) */ GPIO_InitStruct.Pin = STLINK_RX_Pin|STLINK_TX_Pin; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; GPIO_InitStruct.Alternate = GPIO_AF7_USART1; HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); @@ -206,71 +139,6 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) } -/** -* @brief PCD MSP Initialization -* This function configures the hardware resources used in this example -* @param hpcd: PCD handle pointer -* @retval None -*/ -void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hpcd->Instance==USB) - { - /* USER CODE BEGIN USB_MspInit 0 */ - - /* USER CODE END USB_MspInit 0 */ - - __HAL_RCC_GPIOA_CLK_ENABLE(); - /**USB GPIO Configuration - PA11 ------> USB_DM - PA12 ------> USB_DP - */ - GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Alternate = GPIO_AF10_USB; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Peripheral clock enable */ - __HAL_RCC_USB_CLK_ENABLE(); - /* USER CODE BEGIN USB_MspInit 1 */ - - /* USER CODE END USB_MspInit 1 */ - } - -} - -/** -* @brief PCD MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hpcd: PCD handle pointer -* @retval None -*/ -void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd) -{ - if(hpcd->Instance==USB) - { - /* USER CODE BEGIN USB_MspDeInit 0 */ - - /* USER CODE END USB_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USB_CLK_DISABLE(); - - /**USB GPIO Configuration - PA11 ------> USB_DM - PA12 ------> USB_DP - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12); - - /* USER CODE BEGIN USB_MspDeInit 1 */ - - /* USER CODE END USB_MspDeInit 1 */ - } - -} - /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c.h b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c.h deleted file mode 100644 index 1cd7db9..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c.h +++ /dev/null @@ -1,782 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_i2c.h - * @author MCD Application Team - * @brief Header file of I2C HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32WBxx_HAL_I2C_H -#define STM32WBxx_HAL_I2C_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal_def.h" - -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Types I2C Exported Types - * @{ - */ - -/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition - * @brief I2C Configuration Structure definition - * @{ - */ -typedef struct -{ - uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. - This parameter calculated by referring to I2C initialization - section in Reference manual */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref I2C_ADDRESSING_MODE */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected - This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ - -} I2C_InitTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_state_structure_definition HAL state structure definition - * @brief HAL State structure definition - * @note HAL I2C State value coding follow below described bitmap :\n - * b7-b6 Error information\n - * 00 : No Error\n - * 01 : Abort (Abort user request on going)\n - * 10 : Timeout\n - * 11 : Error\n - * b5 Peripheral initialization status\n - * 0 : Reset (peripheral not initialized)\n - * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n - * b4 (not used)\n - * x : Should be set to 0\n - * b3\n - * 0 : Ready or Busy (No Listen mode ongoing)\n - * 1 : Listen (peripheral in Address Listen Mode)\n - * b2 Intrinsic process state\n - * 0 : Ready\n - * 1 : Busy (peripheral busy with some configuration or internal operations)\n - * b1 Rx state\n - * 0 : Ready (no Rx operation ongoing)\n - * 1 : Busy (Rx operation ongoing)\n - * b0 Tx state\n - * 0 : Ready (no Tx operation ongoing)\n - * 1 : Busy (Tx operation ongoing) - * @{ - */ -typedef enum -{ - HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ - HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ - HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ - HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ - HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ - HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ - HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission - process is ongoing */ - HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception - process is ongoing */ - HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ - HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ - HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ - -} HAL_I2C_StateTypeDef; - -/** - * @} - */ - -/** @defgroup HAL_mode_structure_definition HAL mode structure definition - * @brief HAL Mode structure definition - * @note HAL I2C Mode value coding follow below described bitmap :\n - * b7 (not used)\n - * x : Should be set to 0\n - * b6\n - * 0 : None\n - * 1 : Memory (HAL I2C communication is in Memory Mode)\n - * b5\n - * 0 : None\n - * 1 : Slave (HAL I2C communication is in Slave Mode)\n - * b4\n - * 0 : None\n - * 1 : Master (HAL I2C communication is in Master Mode)\n - * b3-b2-b1-b0 (not used)\n - * xxxx : Should be set to 0000 - * @{ - */ -typedef enum -{ - HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ - HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ - HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ - HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ - -} HAL_I2C_ModeTypeDef; - -/** - * @} - */ - -/** @defgroup I2C_Error_Code_definition I2C Error Code definition - * @brief I2C Error Code definition - * @{ - */ -#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ -#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ -#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ -#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ -#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ -#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ -#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ -/** - * @} - */ - -/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition - * @brief I2C handle Structure definition - * @{ - */ -typedef struct __I2C_HandleTypeDef -{ - I2C_TypeDef *Instance; /*!< I2C registers base address */ - - I2C_InitTypeDef Init; /*!< I2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ - - uint16_t XferSize; /*!< I2C transfer size */ - - __IO uint16_t XferCount; /*!< I2C transfer counter */ - - __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can - be a value of @ref I2C_XFEROPTIONS */ - - __IO uint32_t PreviousState; /*!< I2C communication Previous state */ - - HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */ - - DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< I2C locking object */ - - __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ - - __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ - - __IO uint32_t ErrorCode; /*!< I2C Error code */ - - __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ - void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ - void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ - void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ - void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ - void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ - void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ - void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ - void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ - - void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ - - void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ - void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -} I2C_HandleTypeDef; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief HAL I2C Callback ID enumeration definition - */ -typedef enum -{ - HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ - HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ - HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ - HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ - HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ - HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ - HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ - HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ - HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ - - HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ - HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ - -} HAL_I2C_CallbackIDTypeDef; - -/** - * @brief HAL I2C Callback pointer definition - */ -typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ -typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** - * @} - */ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options - * @{ - */ -#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) -#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) -#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) -#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) -#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) -#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) - -/* List of XferOptions in usage of : - * 1- Restart condition in all use cases (direction change or not) - */ -#define I2C_OTHER_FRAME (0x000000AAU) -#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) -/** - * @} - */ - -/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode - * @{ - */ -#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) -#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode - * @{ - */ -#define I2C_DUALADDRESS_DISABLE (0x00000000U) -#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN -/** - * @} - */ - -/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks - * @{ - */ -#define I2C_OA2_NOMASK ((uint8_t)0x00U) -#define I2C_OA2_MASK01 ((uint8_t)0x01U) -#define I2C_OA2_MASK02 ((uint8_t)0x02U) -#define I2C_OA2_MASK03 ((uint8_t)0x03U) -#define I2C_OA2_MASK04 ((uint8_t)0x04U) -#define I2C_OA2_MASK05 ((uint8_t)0x05U) -#define I2C_OA2_MASK06 ((uint8_t)0x06U) -#define I2C_OA2_MASK07 ((uint8_t)0x07U) -/** - * @} - */ - -/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode - * @{ - */ -#define I2C_GENERALCALL_DISABLE (0x00000000U) -#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN -/** - * @} - */ - -/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode - * @{ - */ -#define I2C_NOSTRETCH_DISABLE (0x00000000U) -#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size - * @{ - */ -#define I2C_MEMADD_SIZE_8BIT (0x00000001U) -#define I2C_MEMADD_SIZE_16BIT (0x00000002U) -/** - * @} - */ - -/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View - * @{ - */ -#define I2C_DIRECTION_TRANSMIT (0x00000000U) -#define I2C_DIRECTION_RECEIVE (0x00000001U) -/** - * @} - */ - -/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode - * @{ - */ -#define I2C_RELOAD_MODE I2C_CR2_RELOAD -#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND -#define I2C_SOFTEND_MODE (0x00000000U) -/** - * @} - */ - -/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode - * @{ - */ -#define I2C_NO_STARTSTOP (0x00000000U) -#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) -#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) -#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) -/** - * @} - */ - -/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition - * @brief I2C Interrupt definition - * Elements values convention: 0xXXXXXXXX - * - XXXXXXXX : Interrupt control mask - * @{ - */ -#define I2C_IT_ERRI I2C_CR1_ERRIE -#define I2C_IT_TCI I2C_CR1_TCIE -#define I2C_IT_STOPI I2C_CR1_STOPIE -#define I2C_IT_NACKI I2C_CR1_NACKIE -#define I2C_IT_ADDRI I2C_CR1_ADDRIE -#define I2C_IT_RXI I2C_CR1_RXIE -#define I2C_IT_TXI I2C_CR1_TXIE -/** - * @} - */ - -/** @defgroup I2C_Flag_definition I2C Flag definition - * @{ - */ -#define I2C_FLAG_TXE I2C_ISR_TXE -#define I2C_FLAG_TXIS I2C_ISR_TXIS -#define I2C_FLAG_RXNE I2C_ISR_RXNE -#define I2C_FLAG_ADDR I2C_ISR_ADDR -#define I2C_FLAG_AF I2C_ISR_NACKF -#define I2C_FLAG_STOPF I2C_ISR_STOPF -#define I2C_FLAG_TC I2C_ISR_TC -#define I2C_FLAG_TCR I2C_ISR_TCR -#define I2C_FLAG_BERR I2C_ISR_BERR -#define I2C_FLAG_ARLO I2C_ISR_ARLO -#define I2C_FLAG_OVR I2C_ISR_OVR -#define I2C_FLAG_PECERR I2C_ISR_PECERR -#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT -#define I2C_FLAG_ALERT I2C_ISR_ALERT -#define I2C_FLAG_BUSY I2C_ISR_BUSY -#define I2C_FLAG_DIR I2C_ISR_DIR -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Macros I2C Exported Macros - * @{ - */ - -/** @brief Reset I2C handle state. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) -#endif - -/** @brief Enable the specified I2C interrupt. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) - -/** @brief Disable the specified I2C interrupt. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval None - */ -#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) - -/** @brief Check whether the specified I2C interrupt source is enabled or not. - * @param __HANDLE__ specifies the I2C Handle. - * @param __INTERRUPT__ specifies the I2C interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref I2C_IT_ERRI Errors interrupt enable - * @arg @ref I2C_IT_TCI Transfer complete interrupt enable - * @arg @ref I2C_IT_STOPI STOP detection interrupt enable - * @arg @ref I2C_IT_NACKI NACK received interrupt enable - * @arg @ref I2C_IT_ADDRI Address match interrupt enable - * @arg @ref I2C_IT_RXI RX interrupt enable - * @arg @ref I2C_IT_TXI TX interrupt enable - * - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified I2C flag is set or not. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref I2C_FLAG_TXE Transmit data register empty - * @arg @ref I2C_FLAG_TXIS Transmit interrupt status - * @arg @ref I2C_FLAG_RXNE Receive data register not empty - * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref I2C_FLAG_AF Acknowledge failure received flag - * @arg @ref I2C_FLAG_STOPF STOP detection flag - * @arg @ref I2C_FLAG_TC Transfer complete (master mode) - * @arg @ref I2C_FLAG_TCR Transfer complete reload - * @arg @ref I2C_FLAG_BERR Bus error - * @arg @ref I2C_FLAG_ARLO Arbitration lost - * @arg @ref I2C_FLAG_OVR Overrun/Underrun - * @arg @ref I2C_FLAG_PECERR PEC error in reception - * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref I2C_FLAG_ALERT SMBus alert - * @arg @ref I2C_FLAG_BUSY Bus busy - * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) - * - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define I2C_FLAG_MASK (0x0001FFFFU) -#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET) - -/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. - * @param __HANDLE__ specifies the I2C Handle. - * @param __FLAG__ specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg @ref I2C_FLAG_TXE Transmit data register empty - * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) - * @arg @ref I2C_FLAG_AF Acknowledge failure received flag - * @arg @ref I2C_FLAG_STOPF STOP detection flag - * @arg @ref I2C_FLAG_BERR Bus error - * @arg @ref I2C_FLAG_ARLO Arbitration lost - * @arg @ref I2C_FLAG_OVR Overrun/Underrun - * @arg @ref I2C_FLAG_PECERR PEC error in reception - * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag - * @arg @ref I2C_FLAG_ALERT SMBus alert - * - * @retval None - */ -#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \ - : ((__HANDLE__)->Instance->ICR = (__FLAG__))) - -/** @brief Enable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) - -/** @brief Disable the specified I2C peripheral. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) - -/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. - * @param __HANDLE__ specifies the I2C Handle. - * @retval None - */ -#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) -/** - * @} - */ - -/* Include I2C HAL Extended module */ -#include "stm32wbxx_hal_i2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2C_Exported_Functions - * @{ - */ - -/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions******************************/ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); - -/* Callbacks Register/UnRegister functions ***********************************/ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -/* IO operation functions ****************************************************/ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); - -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); - -/******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); -/** - * @} - */ - -/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ -/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); -void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @{ - */ -/* Peripheral State, Mode and Error functions *********************************/ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); - -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Constants I2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2C_Private_Macro I2C Private Macros - * @{ - */ - -#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ - ((MODE) == I2C_ADDRESSINGMODE_10BIT)) - -#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) - -#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ - ((MASK) == I2C_OA2_MASK01) || \ - ((MASK) == I2C_OA2_MASK02) || \ - ((MASK) == I2C_OA2_MASK03) || \ - ((MASK) == I2C_OA2_MASK04) || \ - ((MASK) == I2C_OA2_MASK05) || \ - ((MASK) == I2C_OA2_MASK06) || \ - ((MASK) == I2C_OA2_MASK07)) - -#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ - ((CALL) == I2C_GENERALCALL_ENABLE)) - -#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == I2C_NOSTRETCH_ENABLE)) - -#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == I2C_MEMADD_SIZE_16BIT)) - -#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ - ((MODE) == I2C_AUTOEND_MODE) || \ - ((MODE) == I2C_SOFTEND_MODE)) - -#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ - ((REQUEST) == I2C_GENERATE_START_READ) || \ - ((REQUEST) == I2C_GENERATE_START_WRITE) || \ - ((REQUEST) == I2C_NO_STARTSTOP)) - -#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ - ((REQUEST) == I2C_NEXT_FRAME) || \ - ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME) || \ - ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ - IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) - -#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ - ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) - -#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN))) - -#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)) -#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)) -#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) -#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) -#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) - -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) -#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) - -#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U))) -#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) - -#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) - -#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) -#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ -/* Private functions are defined in stm32wbxx_hal_i2c.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32WBxx_HAL_I2C_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h deleted file mode 100644 index 9cdef10..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h +++ /dev/null @@ -1,174 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_i2c_ex.h - * @author MCD Application Team - * @brief Header file of I2C HAL Extended module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32WBxx_HAL_I2C_EX_H -#define STM32WBxx_HAL_I2C_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal_def.h" - -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @addtogroup I2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants - * @{ - */ - -/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter - * @{ - */ -#define I2C_ANALOGFILTER_ENABLE 0x00000000U -#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF -/** - * @} - */ - -/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus - * @{ - */ -#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ -#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ -#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ -#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ -#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ -#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ -#if defined(SYSCFG_CFGR1_I2C3_FMP) -#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ -#else -#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */ -#endif -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions - * @{ - */ - -/** @addtogroup I2CEx_Exported_Functions_Group1 I2C Extended Filter Mode Functions - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); -/** - * @} - */ - -/** @addtogroup I2CEx_Exported_Functions_Group2 I2C Extended WakeUp Mode Functions - * @{ - */ -HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2CEx_Exported_Functions_Group3 I2C Extended FastModePlus Functions - * @{ - */ -void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); -void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); -/** - * @} - */ - - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros - * @{ - */ -#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == I2C_ANALOGFILTER_DISABLE)) - -#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) - -#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ - (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3)) -/** - * @} - */ - -/* Private Functions ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions - * @{ - */ -/* Private functions are defined in stm32wbxx_hal_i2c_ex.c file */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32WBxx_HAL_I2C_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h deleted file mode 100644 index 7123457..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h +++ /dev/null @@ -1,994 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_pcd.h - * @author MCD Application Team - * @brief Header file of PCD HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32WBxx_HAL_PCD_H -#define STM32WBxx_HAL_PCD_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_ll_usb.h" - -#if defined (USB) - -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @addtogroup PCD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup PCD_Exported_Types PCD Exported Types - * @{ - */ - -/** - * @brief PCD State structure definition - */ -typedef enum -{ - HAL_PCD_STATE_RESET = 0x00, - HAL_PCD_STATE_READY = 0x01, - HAL_PCD_STATE_ERROR = 0x02, - HAL_PCD_STATE_BUSY = 0x03, - HAL_PCD_STATE_TIMEOUT = 0x04 -} PCD_StateTypeDef; - -/* Device LPM suspend state */ -typedef enum -{ - LPM_L0 = 0x00, /* on */ - LPM_L1 = 0x01, /* LPM L1 sleep */ - LPM_L2 = 0x02, /* suspend */ - LPM_L3 = 0x03, /* off */ -} PCD_LPM_StateTypeDef; - -typedef enum -{ - PCD_LPM_L0_ACTIVE = 0x00, /* on */ - PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ -} PCD_LPM_MsgTypeDef; - -typedef enum -{ - PCD_BCD_ERROR = 0xFF, - PCD_BCD_CONTACT_DETECTION = 0xFE, - PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, - PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, - PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, - PCD_BCD_DISCOVERY_COMPLETED = 0x00, - -} PCD_BCD_MsgTypeDef; - - - - - -typedef USB_TypeDef PCD_TypeDef; -typedef USB_CfgTypeDef PCD_InitTypeDef; -typedef USB_EPTypeDef PCD_EPTypeDef; - - -/** - * @brief PCD Handle Structure definition - */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -typedef struct __PCD_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -{ - PCD_TypeDef *Instance; /*!< Register base address */ - PCD_InitTypeDef Init; /*!< PCD required parameters */ - __IO uint8_t USB_Address; /*!< USB Address */ - PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ - PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ - HAL_LockTypeDef Lock; /*!< PCD peripheral status */ - __IO PCD_StateTypeDef State; /*!< PCD communication state */ - __IO uint32_t ErrorCode; /*!< PCD Error code */ - uint32_t Setup[12]; /*!< Setup packet buffer */ - PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ - uint32_t BESL; - - - uint32_t lpm_active; /*!< Enable or disable the Link Power Management . - This parameter can be set to ENABLE or DISABLE */ - - uint32_t battery_charging_active; /*!< Enable or disable Battery charging. - This parameter can be set to ENABLE or DISABLE */ - void *pData; /*!< Pointer to upper stack Handler */ - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ - void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ - void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ - void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ - void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ - void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ - void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ - - void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ - void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ - void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ - void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ - void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ - void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ - - void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ - void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -} PCD_HandleTypeDef; - -/** - * @} - */ - -/* Include PCD HAL Extended module */ -#include "stm32wbxx_hal_pcd_ex.h" - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -/** @defgroup PCD_Speed PCD Speed - * @{ - */ -#define PCD_SPEED_FULL USBD_FS_SPEED -/** - * @} - */ - -/** @defgroup PCD_PHY_Module PCD PHY Module - * @{ - */ -#define PCD_PHY_ULPI 1U -#define PCD_PHY_EMBEDDED 2U -#define PCD_PHY_UTMI 3U -/** - * @} - */ - -/** @defgroup PCD_Error_Code_definition PCD Error Code definition - * @brief PCD Error Code definition - * @{ - */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup PCD_Exported_Macros PCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ - - -#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) -#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= (uint16_t)(~(__INTERRUPT__))) - -#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR1 |= USB_WAKEUP_EXTI_LINE -#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR1 &= ~(USB_WAKEUP_EXTI_LINE) - - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/* Initialization/de-initialization functions ********************************/ -/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition - * @brief HAL USB OTG PCD Callback ID enumeration definition - * @{ - */ -typedef enum -{ - HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ - HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ - HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ - HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ - HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ - HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ - HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ - - HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ - HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ - -} HAL_PCD_CallbackIDTypeDef; -/** - * @} - */ - -/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition - * @brief HAL USB OTG PCD Callback pointer definition - * @{ - */ - -typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ -typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ -typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ -typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ -typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ -typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ -typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ - -/** - * @} - */ - -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, - HAL_PCD_CallbackIDTypeDef CallbackID, - pPCD_CallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, - HAL_PCD_CallbackIDTypeDef CallbackID); - -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataOutStageCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataInStageCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoOutIncpltCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoInIncpltCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, - pPCD_BcdCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); - -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, - pPCD_LpmCallbackTypeDef pCallback); - -HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* I/O operation functions ***************************************************/ -/* Non-Blocking mode: Interrupt */ -/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, - uint16_t ep_mps, uint8_t ep_type); - -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, - uint8_t *pBuf, uint32_t len); - -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, - uint8_t *pBuf, uint32_t len); - - -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); - -uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PCD_Private_Constants PCD Private Constants - * @{ - */ -/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt - * @{ - */ - - -#define USB_WAKEUP_EXTI_LINE (0x1U << 28) /*!< USB FS EXTI Line WakeUp Interrupt */ - - -/** - * @} - */ - -/** @defgroup PCD_EP0_MPS PCD EP0 MPS - * @{ - */ -#define PCD_EP0MPS_64 EP_MPS_64 -#define PCD_EP0MPS_32 EP_MPS_32 -#define PCD_EP0MPS_16 EP_MPS_16 -#define PCD_EP0MPS_08 EP_MPS_8 -/** - * @} - */ - -/** @defgroup PCD_ENDP PCD ENDP - * @{ - */ -#define PCD_ENDP0 0U -#define PCD_ENDP1 1U -#define PCD_ENDP2 2U -#define PCD_ENDP3 3U -#define PCD_ENDP4 4U -#define PCD_ENDP5 5U -#define PCD_ENDP6 6U -#define PCD_ENDP7 7U -/** - * @} - */ - -/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind - * @{ - */ -#define PCD_SNG_BUF 0U -#define PCD_DBL_BUF 1U -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ - -/******************** Bit definition for USB_COUNTn_RX register *************/ -#define USB_CNTRX_NBLK_MSK (0x1FU << 10) -#define USB_CNTRX_BLSIZE (0x1U << 15) - -/* SetENDPOINT */ -#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue)) - -/* GetENDPOINT */ -#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U))) - -/* ENDPOINT transfer */ -#define USB_EP0StartXfer USB_EPStartXfer - -/** - * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wType Endpoint Type. - * @retval None - */ -#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX))) - -/** - * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval Endpoint Type - */ -#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) - -/** - * @brief free buffer used from the application realizing it to the line - * toggles bit SW_BUF in the double buffered endpoint register - * @param USBx USB device. - * @param bEpNum, bDir - * @retval None - */ -#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) \ - do { \ - if ((bDir) == 0U) \ - { \ - /* OUT double buffered endpoint */ \ - PCD_TX_DTOG((USBx), (bEpNum)); \ - } \ - else if ((bDir) == 1U) \ - { \ - /* IN double buffered endpoint */ \ - PCD_RX_DTOG((USBx), (bEpNum)); \ - } \ - } while(0) - -/** - * @brief sets the status for tx transfer (bits STAT_TX[1:0]). - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wState new state - * @retval None - */ -#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \ - /* toggle first bit ? */ \ - if ((USB_EPTX_DTOG1 & (wState))!= 0U) \ - { \ - _wRegVal ^= USB_EPTX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if ((USB_EPTX_DTOG2 & (wState))!= 0U) \ - { \ - _wRegVal ^= USB_EPTX_DTOG2; \ - } \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ - } while(0) /* PCD_SET_EP_TX_STATUS */ - -/** - * @brief sets the status for rx transfer (bits STAT_TX[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wState new state - * @retval None - */ -#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \ - /* toggle first bit ? */ \ - if ((USB_EPRX_DTOG1 & (wState))!= 0U) \ - { \ - _wRegVal ^= USB_EPRX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if ((USB_EPRX_DTOG2 & (wState))!= 0U) \ - { \ - _wRegVal ^= USB_EPRX_DTOG2; \ - } \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ - } while(0) /* PCD_SET_EP_RX_STATUS */ - -/** - * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wStaterx new state. - * @param wStatetx new state. - * @retval None - */ -#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \ - /* toggle first bit ? */ \ - if ((USB_EPRX_DTOG1 & (wStaterx))!= 0U) \ - { \ - _wRegVal ^= USB_EPRX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if ((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \ - { \ - _wRegVal ^= USB_EPRX_DTOG2; \ - } \ - /* toggle first bit ? */ \ - if ((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \ - { \ - _wRegVal ^= USB_EPTX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if ((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \ - { \ - _wRegVal ^= USB_EPTX_DTOG2; \ - } \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ - } while(0) /* PCD_SET_EP_TXRX_STATUS */ - -/** - * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] - * /STAT_RX[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval status - */ -#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) -#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) - -/** - * @brief sets directly the VALID tx/rx-status into the endpoint register - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) -#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) - -/** - * @brief checks stall condition in an endpoint. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval TRUE = endpoint in stall condition. - */ -#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) == USB_EP_TX_STALL) -#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) == USB_EP_RX_STALL) - -/** - * @brief set & clear EP_KIND bit. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_SET_EP_KIND(USBx, bEpNum) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \ - } while(0) /* PCD_SET_EP_KIND */ - -#define PCD_CLEAR_EP_KIND(USBx, bEpNum) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ - } while(0) /* PCD_CLEAR_EP_KIND */ - -/** - * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) -#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) - -/** - * @brief Sets/clears directly EP_KIND bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) -#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) - -/** - * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \ - } while(0) /* PCD_CLEAR_RX_EP_CTR */ - -#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX)); \ - } while(0) /* PCD_CLEAR_TX_EP_CTR */ - -/** - * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_RX_DTOG(USBx, bEpNum) \ - do { \ - uint16_t _wEPVal; \ - \ - _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \ - } while(0) /* PCD_RX_DTOG */ - -#define PCD_TX_DTOG(USBx, bEpNum) \ - do { \ - uint16_t _wEPVal; \ - \ - _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_TX)); \ - } while(0) /* PCD_TX_DTOG */ -/** - * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ - \ - if ((_wRegVal & USB_EP_DTOG_RX) != 0U)\ - { \ - PCD_RX_DTOG((USBx), (bEpNum)); \ - } \ - } while(0) /* PCD_CLEAR_RX_DTOG */ - -#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ - \ - if ((_wRegVal & USB_EP_DTOG_TX) != 0U)\ - { \ - PCD_TX_DTOG((USBx), (bEpNum)); \ - } \ - } while(0) /* PCD_CLEAR_TX_DTOG */ - -/** - * @brief Sets address in an endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param bAddr Address. - * @retval None - */ -#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) \ - do { \ - uint16_t _wRegVal; \ - \ - _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \ - \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ - } while(0) /* PCD_SET_EP_ADDRESS */ - -/** - * @brief Gets address in an endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) - -#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) -#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U))) - -/** - * @brief sets address of the tx/rx buffer. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wAddr address to be set (must be word aligned). - * @retval None - */ -#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) \ - do { \ - __IO uint16_t *_wRegVal; \ - uint32_t _wRegBase = (uint32_t)USBx; \ - \ - _wRegBase += (uint32_t)(USBx)->BTABLE; \ - _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \ - *_wRegVal = ((wAddr) >> 1) << 1; \ - } while(0) /* PCD_SET_EP_TX_ADDRESS */ - -#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) \ - do { \ - __IO uint16_t *_wRegVal; \ - uint32_t _wRegBase = (uint32_t)USBx; \ - \ - _wRegBase += (uint32_t)(USBx)->BTABLE; \ - _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \ - *_wRegVal = ((wAddr) >> 1) << 1; \ - } while(0) /* PCD_SET_EP_RX_ADDRESS */ - -/** - * @brief Gets address of the tx/rx buffer. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval address of the buffer. - */ -#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) -#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) - -/** - * @brief Sets counter of rx buffer with no. of blocks. - * @param pdwReg Register pointer - * @param wCount Counter. - * @param wNBlocks no. of Blocks. - * @retval None - */ -#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ - do { \ - (wNBlocks) = (wCount) >> 5; \ - if (((wCount) & 0x1fU) == 0U) \ - { \ - (wNBlocks)--; \ - } \ - *(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \ - } while(0) /* PCD_CALC_BLK32 */ - -#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ - do { \ - (wNBlocks) = (wCount) >> 1; \ - if (((wCount) & 0x1U) != 0U) \ - { \ - (wNBlocks)++; \ - } \ - *(pdwReg) = (uint16_t)((wNBlocks) << 10); \ - } while(0) /* PCD_CALC_BLK2 */ - -#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \ - do { \ - uint32_t wNBlocks; \ - if ((wCount) == 0U) \ - { \ - *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \ - *(pdwReg) |= USB_CNTRX_BLSIZE; \ - } \ - else if((wCount) <= 62U) \ - { \ - PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \ - } \ - else \ - { \ - PCD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \ - } \ - } while(0) /* PCD_SET_EP_CNT_RX_REG */ - -#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) \ - do { \ - uint32_t _wRegBase = (uint32_t)(USBx); \ - __IO uint16_t *pdwReg; \ - \ - _wRegBase += (uint32_t)(USBx)->BTABLE; \ - pdwReg = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ - PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \ - } while(0) - -/** - * @brief sets counter for the tx/rx buffer. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wCount Counter value. - * @retval None - */ -#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) \ - do { \ - uint32_t _wRegBase = (uint32_t)(USBx); \ - __IO uint16_t *_wRegVal; \ - \ - _wRegBase += (uint32_t)(USBx)->BTABLE; \ - _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ - *_wRegVal = (uint16_t)(wCount); \ - } while(0) - -#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) \ - do { \ - uint32_t _wRegBase = (uint32_t)(USBx); \ - __IO uint16_t *_wRegVal; \ - \ - _wRegBase += (uint32_t)(USBx)->BTABLE; \ - _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ - PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \ - } while(0) - -/** - * @brief gets counter of the tx buffer. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval Counter value - */ -#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU) -#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU) - -/** - * @brief Sets buffer 0/1 address in a double buffer endpoint. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wBuf0Addr buffer 0 address. - * @retval Counter value - */ -#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) \ - do { \ - PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \ - } while(0) /* PCD_SET_EP_DBUF0_ADDR */ - -#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) \ - do { \ - PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \ - } while(0) /* PCD_SET_EP_DBUF1_ADDR */ - -/** - * @brief Sets addresses in a double buffer endpoint. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param wBuf0Addr: buffer 0 address. - * @param wBuf1Addr = buffer 1 address. - * @retval None - */ -#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) \ - do { \ - PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \ - PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \ - } while(0) /* PCD_SET_EP_DBUF_ADDR */ - -/** - * @brief Gets buffer 0/1 address of a double buffer endpoint. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) -#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) - -/** - * @brief Gets buffer 0/1 address of a double buffer endpoint. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @param bDir endpoint dir EP_DBUF_OUT = OUT - * EP_DBUF_IN = IN - * @param wCount: Counter value - * @retval None - */ -#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) \ - do { \ - if ((bDir) == 0U) \ - /* OUT endpoint */ \ - { \ - PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum), (wCount)); \ - } \ - else \ - { \ - if ((bDir) == 1U) \ - { \ - /* IN endpoint */ \ - PCD_SET_EP_TX_CNT((USBx), (bEpNum), (wCount)); \ - } \ - } \ - } while(0) /* SetEPDblBuf0Count*/ - -#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) \ - do { \ - uint32_t _wBase = (uint32_t)(USBx); \ - __IO uint16_t *_wEPRegVal; \ - \ - if ((bDir) == 0U) \ - { \ - /* OUT endpoint */ \ - PCD_SET_EP_RX_CNT((USBx), (bEpNum), (wCount)); \ - } \ - else \ - { \ - if ((bDir) == 1U) \ - { \ - /* IN endpoint */ \ - _wBase += (uint32_t)(USBx)->BTABLE; \ - _wEPRegVal = (__IO uint16_t *)(_wBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ - *_wEPRegVal = (uint16_t)(wCount); \ - } \ - } \ - } while(0) /* SetEPDblBuf1Count */ - -#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) \ - do { \ - PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ - PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ - } while(0) /* PCD_SET_EP_DBUF_CNT */ - -/** - * @brief Gets buffer 0/1 rx/tx counter for double buffering. - * @param USBx USB peripheral instance register address. - * @param bEpNum Endpoint Number. - * @retval None - */ -#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) -#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) - - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB) */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32WBxx_HAL_PCD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h deleted file mode 100644 index 2f75a7e..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h +++ /dev/null @@ -1,91 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_pcd_ex.h - * @author MCD Application Team - * @brief Header file of PCD HAL Extension module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32WBxx_HAL_PCD_EX_H -#define STM32WBxx_HAL_PCD_EX_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal_def.h" - -#if defined (USB) -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @addtogroup PCDEx - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ -/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @{ - */ - - - -HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, - uint16_t ep_kind, uint32_t pmaadress); - - -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); - - -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); - -void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); -void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB) */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32WBxx_HAL_PCD_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h deleted file mode 100644 index c5db29c..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h +++ /dev/null @@ -1,237 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_ll_usb.h - * @author MCD Application Team - * @brief Header file of USB Low Layer HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32WBxx_LL_USB_H -#define STM32WBxx_LL_USB_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal_def.h" - -#if defined (USB) -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @addtogroup USB_LL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief USB Mode definition - */ - - - -typedef enum -{ - USB_DEVICE_MODE = 0 -} USB_ModeTypeDef; - -/** - * @brief USB Initialization Structure definition - */ -typedef struct -{ - uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t speed; /*!< USB Core speed. - This parameter can be any value of @ref USB_Core_Speed */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ - - uint32_t phy_itface; /*!< Select the used PHY interface. - This parameter can be any value of @ref USB_Core_PHY */ - - uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - - uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ - - uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ - - uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ -} USB_CfgTypeDef; - -typedef struct -{ - uint8_t num; /*!< Endpoint number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_stall; /*!< Endpoint stall condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t type; /*!< Endpoint type - This parameter can be any value of @ref USB_EP_Type */ - - uint8_t data_pid_start; /*!< Initial data PID - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint16_t pmaadress; /*!< PMA Address - This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - - uint16_t pmaaddr0; /*!< PMA Address0 - This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - - uint16_t pmaaddr1; /*!< PMA Address1 - This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - - uint8_t doublebuffer; /*!< Double buffer enable - This parameter can be 0 or 1 */ - - uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral - This parameter is added to ensure compatibility across USB peripherals */ - - uint32_t maxpacket; /*!< Endpoint Max packet size - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - - uint32_t xfer_len; /*!< Current transfer length */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ - - uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ - - uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ - -} USB_EPTypeDef; - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - - -/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS - * @{ - */ -#define EP_MPS_64 0U -#define EP_MPS_32 1U -#define EP_MPS_16 2U -#define EP_MPS_8 3U -/** - * @} - */ - -/** @defgroup USB_LL_EP_Type USB Low Layer EP Type - * @{ - */ -#define EP_TYPE_CTRL 0U -#define EP_TYPE_ISOC 1U -#define EP_TYPE_BULK 2U -#define EP_TYPE_INTR 3U -#define EP_TYPE_MSK 3U -/** - * @} - */ - -/** @defgroup USB_LL Device Speed - * @{ - */ -#define USBD_FS_SPEED 2U -/** - * @} - */ - -#define BTABLE_ADDRESS 0x000U -#define PMA_ACCESS 1U - -#define EP_ADDR_MSK 0x7U -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions - * @{ - */ - - -HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); -HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); -HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode); - -#if defined (HAL_PCD_MODULE_ENABLED) -HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); -#endif - -HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address); -HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); -uint32_t USB_ReadInterrupts(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); - -void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, - uint16_t wPMABufAddr, uint16_t wNBytes); - -void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, - uint16_t wPMABufAddr, uint16_t wNBytes); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB) */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32WBxx_LL_USB_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c deleted file mode 100644 index 6e9af79..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c +++ /dev/null @@ -1,6613 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_i2c.c - * @author MCD Application Team - * @brief I2C HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Inter Integrated Circuit (I2C) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and Errors functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The I2C HAL driver can be used as follows: - - (#) Declare a I2C_HandleTypeDef handle structure, for example: - I2C_HandleTypeDef hi2c; - - (#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API: - (##) Enable the I2Cx interface clock - (##) I2C pins configuration - (+++) Enable the clock for the I2C GPIOs - (+++) Configure I2C pins as alternate function open-drain - (##) NVIC configuration if you need to use interrupt process - (+++) Configure the I2Cx interrupt priority - (+++) Enable the NVIC I2C IRQ Channel - (##) DMA Configuration if you need to use DMA process - (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel - (+++) Enable the DMAx interface clock using - (+++) Configure the DMA handle parameters - (+++) Configure the DMA Tx or Rx channel - (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on - the DMA Tx or Rx channel - - (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, - Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. - - (#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware - (GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API. - - (#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady() - - (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit() - (+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive() - (+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit() - (+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive() - - *** Polling mode IO MEM operation *** - ===================================== - [..] - (+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write() - (+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read() - - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT() - (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT() - (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT() - (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT() - (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() - (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() - (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - - *** Interrupt mode or DMA mode IO sequential operation *** - ========================================================== - [..] - (@) These interfaces allow to manage a sequential transfer with a repeated start condition - when a direction change during transfer - [..] - (+) A specific option field manage the different steps of a sequential transfer - (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: - (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode - (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition - (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address - and data to transfer without a final stop condition, an then permit a call the same master sequential interface - several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT() - or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA()) - (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to transfer - if no direction change and without a final stop condition in both cases - (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address - and with new data to transfer if the direction change or manage only the new data to transfer - if no direction change and with a final stop condition in both cases - (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential - interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). - Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) - or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). - Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit - without stopping the communication and so generate a restart condition. - (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential - interface. - Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) - or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). - Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. - - (+) Different sequential I2C interfaces are listed below: - (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() - or using @ref HAL_I2C_Master_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() - (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT() - or using @ref HAL_I2C_Master_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() - (++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() - (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() - (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT() - (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can - add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). - (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback() - (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT() - or using @ref HAL_I2C_Slave_Seq_Transmit_DMA() - (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() - (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT() - or using @ref HAL_I2C_Slave_Seq_Receive_DMA() - (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() - (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - (++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** Interrupt mode IO MEM operation *** - ======================================= - [..] - (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using - @ref HAL_I2C_Mem_Write_IT() - (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using - @ref HAL_I2C_Mem_Read_IT() - (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - - *** DMA mode IO operation *** - ============================== - [..] - (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Master_Transmit_DMA() - (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback() - (+) Receive in master mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Master_Receive_DMA() - (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback() - (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Slave_Transmit_DMA() - (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback() - (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using - @ref HAL_I2C_Slave_Receive_DMA() - (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - (+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT() - (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback() - (+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro. - This action will inform Master to generate a Stop condition to discard the communication. - - *** DMA mode IO MEM operation *** - ================================= - [..] - (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using - @ref HAL_I2C_Mem_Write_DMA() - (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback() - (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using - @ref HAL_I2C_Mem_Read_DMA() - (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback() - (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can - add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback() - - - *** I2C HAL driver macros list *** - ================================== - [..] - Below the list of most used macros in I2C HAL driver. - - (+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral - (+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral - (+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode - (+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not - (+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag - (+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt - (+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt - - *** Callback registration *** - ============================================= - [..] - The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 - allows the user to configure dynamically the driver callbacks. - Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback() - to register an interrupt callback. - [..] - Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - This function takes as parameters the HAL peripheral handle, the Callback ID - and a pointer to the user callback function. - [..] - For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback(). - [..] - Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default - weak function. - @ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, - and the Callback ID. - This function allows to reset following callbacks: - (+) MasterTxCpltCallback : callback for Master transmission end of transfer. - (+) MasterRxCpltCallback : callback for Master reception end of transfer. - (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. - (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. - (+) ListenCpltCallback : callback for end of listen mode. - (+) MemTxCpltCallback : callback for Memory transmission end of transfer. - (+) MemRxCpltCallback : callback for Memory reception end of transfer. - (+) ErrorCallback : callback for error detection. - (+) AbortCpltCallback : callback for abort completion process. - (+) MspInitCallback : callback for Msp Init. - (+) MspDeInitCallback : callback for Msp DeInit. - [..] - For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback(). - [..] - By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET - all callbacks are set to the corresponding weak functions: - examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback(). - Exception done for MspInit and MspDeInit functions that are - reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when - these callbacks are null (not registered beforehand). - If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() - keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. - [..] - Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only. - Exception done MspInit/MspDeInit functions that can be registered/unregistered - in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state, - thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. - Then, the user first registers the MspInit/MspDeInit user callbacks - using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit() - or @ref HAL_I2C_Init() function. - [..] - When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or - not defined, the callback registration feature is not available and all callbacks - are set to the corresponding weak functions. - - [..] - (@) You can refer to the I2C HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal.h" - -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @defgroup I2C I2C - * @brief I2C HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup I2C_Private_Define I2C Private Define - * @{ - */ -#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ -#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ -#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ -#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ - -#define MAX_NBYTE_SIZE 255U -#define SlaveAddr_SHIFT 7U -#define SlaveAddr_MSK 0x06U - -/* Private define for @ref PreviousState usage */ -#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ -#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ -#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */ -#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */ - - -/* Private define to centralize the enable/disable of Interrupts */ -#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ -#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ -#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */ - -#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */ -#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */ -#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */ - -/* Private define Sequential Transfer Options default/reset value */ -#define I2C_NO_OPTION_FRAME (0xFFFF0000U) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ -/* Private functions to handle DMA transfer */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); -static void I2C_DMAError(DMA_HandleTypeDef *hdma); -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); - -/* Private functions to handle IT transfer */ -static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); -static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); -static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); -static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); - -/* Private functions to handle IT transfer */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); - -/* Private functions for I2C transfer IRQ handler */ -static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); -static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); -static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); -static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); - -/* Private functions to handle flags during polling transfer */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); - -/* Private functions to centralize the enable/disable of Interrupts */ -static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); -static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); - -/* Private function to treat different error callback */ -static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); - -/* Private function to flush TXDR register */ -static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); - -/* Private function to handle start, restart or stop a transfer */ -static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request); - -/* Private function to Convert Specific options */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup I2C_Exported_Functions I2C Exported Functions - * @{ - */ - -/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This subsection provides a set of functions allowing to initialize and - deinitialize the I2Cx peripheral: - - (+) User must Implement HAL_I2C_MspInit() function in which he configures - all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). - - (+) Call the function HAL_I2C_Init() to configure the selected device with - the selected configuration: - (++) Clock Timing - (++) Own Address 1 - (++) Addressing mode (Master, Slave) - (++) Dual Addressing mode - (++) Own Address 2 - (++) Own Address 2 Mask - (++) General call mode - (++) Nostretch mode - - (+) Call the function HAL_I2C_DeInit() to restore the default configuration - of the selected I2Cx peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the I2C according to the specified parameters - * in the I2C_InitTypeDef and initialize the associated handle. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); - assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); - assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); - assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); - assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); - assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); - assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); - - if (hi2c->State == HAL_I2C_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hi2c->Lock = HAL_UNLOCKED; - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - /* Init the I2C Callback settings */ - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - - if (hi2c->MspInitCallback == NULL) - { - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - } - - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - hi2c->MspInitCallback(hi2c); -#else - /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ - HAL_I2C_MspInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ - /* Configure I2Cx: Frequency range */ - hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; - - /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ - /* Disable Own Address1 before set the Own Address1 configuration */ - hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; - - /* Configure I2Cx: Own Address1 and ack own address1 mode */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) - { - hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); - } - else /* I2C_ADDRESSINGMODE_10BIT */ - { - hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); - } - - /*---------------------------- I2Cx CR2 Configuration ----------------------*/ - /* Configure I2Cx: Addressing Master mode */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - hi2c->Instance->CR2 = (I2C_CR2_ADD10); - } - /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ - hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); - - /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ - /* Disable Own Address2 before set the Own Address2 configuration */ - hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; - - /* Configure I2Cx: Dual mode and Own Address2 */ - hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8)); - - /*---------------------------- I2Cx CR1 Configuration ----------------------*/ - /* Configure I2Cx: Generalcall and NoStretch mode */ - hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); - - /* Enable the selected I2C peripheral */ - __HAL_I2C_ENABLE(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - return HAL_OK; -} - -/** - * @brief DeInitialize the I2C peripheral. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) -{ - /* Check the I2C handle allocation */ - if (hi2c == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the I2C Peripheral Clock */ - __HAL_I2C_DISABLE(hi2c); - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - if (hi2c->MspDeInitCallback == NULL) - { - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - hi2c->MspDeInitCallback(hi2c); -#else - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_I2C_MspDeInit(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_RESET; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Initialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitialize the I2C MSP. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) -/** - * @brief Register a User I2C Callback - * To be used instead of the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = pCallback; - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = pCallback; - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = pCallback; - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = pCallback; - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = pCallback; - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = pCallback; - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = pCallback; - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = pCallback; - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Unregister an I2C Callback - * I2C callback is redirected to the weak predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * This parameter can be one of the following values: - * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID - * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID - * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID - * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID - * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID - * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID - * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID - * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID - * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID - * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : - hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ - break; - - case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : - hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ - break; - - case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : - hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ - break; - - case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : - hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ - break; - - case HAL_I2C_LISTEN_COMPLETE_CB_ID : - hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ - break; - - case HAL_I2C_MEM_TX_COMPLETE_CB_ID : - hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ - break; - - case HAL_I2C_MEM_RX_COMPLETE_CB_ID : - hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ - break; - - case HAL_I2C_ERROR_CB_ID : - hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ - break; - - case HAL_I2C_ABORT_CB_ID : - hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ - break; - - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (HAL_I2C_STATE_RESET == hi2c->State) - { - switch (CallbackID) - { - case HAL_I2C_MSPINIT_CB_ID : - hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ - break; - - case HAL_I2C_MSPDEINIT_CB_ID : - hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ - break; - - default : - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief Register the Slave Address Match I2C Callback - * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pCallback pointer to the Address Match Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = pCallback; - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -/** - * @brief UnRegister the Slave Address Match I2C Callback - * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hi2c); - - if (HAL_I2C_STATE_READY == hi2c->State) - { - hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ - } - else - { - /* Update the error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hi2c); - return status; -} - -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the I2C data - transfers. - - (#) There are two modes of transfer: - (++) Blocking mode : The communication is performed in the polling mode. - The status of all data processing is returned by the same function - after finishing transfer. - (++) No-Blocking mode : The communication is performed using Interrupts - or DMA. These functions return the status of the transfer startup. - The end of the data processing will be indicated through the - dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - - (#) Blocking mode functions are : - (++) HAL_I2C_Master_Transmit() - (++) HAL_I2C_Master_Receive() - (++) HAL_I2C_Slave_Transmit() - (++) HAL_I2C_Slave_Receive() - (++) HAL_I2C_Mem_Write() - (++) HAL_I2C_Mem_Read() - (++) HAL_I2C_IsDeviceReady() - - (#) No-Blocking mode functions with Interrupt are : - (++) HAL_I2C_Master_Transmit_IT() - (++) HAL_I2C_Master_Receive_IT() - (++) HAL_I2C_Slave_Transmit_IT() - (++) HAL_I2C_Slave_Receive_IT() - (++) HAL_I2C_Mem_Write_IT() - (++) HAL_I2C_Mem_Read_IT() - (++) HAL_I2C_Master_Seq_Transmit_IT() - (++) HAL_I2C_Master_Seq_Receive_IT() - (++) HAL_I2C_Slave_Seq_Transmit_IT() - (++) HAL_I2C_Slave_Seq_Receive_IT() - (++) HAL_I2C_EnableListen_IT() - (++) HAL_I2C_DisableListen_IT() - (++) HAL_I2C_Master_Abort_IT() - - (#) No-Blocking mode functions with DMA are : - (++) HAL_I2C_Master_Transmit_DMA() - (++) HAL_I2C_Master_Receive_DMA() - (++) HAL_I2C_Slave_Transmit_DMA() - (++) HAL_I2C_Slave_Receive_DMA() - (++) HAL_I2C_Mem_Write_DMA() - (++) HAL_I2C_Mem_Read_DMA() - (++) HAL_I2C_Master_Seq_Transmit_DMA() - (++) HAL_I2C_Master_Seq_Receive_DMA() - (++) HAL_I2C_Slave_Seq_Transmit_DMA() - (++) HAL_I2C_Slave_Seq_Receive_DMA() - - (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_I2C_MasterTxCpltCallback() - (++) HAL_I2C_MasterRxCpltCallback() - (++) HAL_I2C_SlaveTxCpltCallback() - (++) HAL_I2C_SlaveRxCpltCallback() - (++) HAL_I2C_MemTxCpltCallback() - (++) HAL_I2C_MemRxCpltCallback() - (++) HAL_I2C_AddrCallback() - (++) HAL_I2C_ListenCpltCallback() - (++) HAL_I2C_ErrorCallback() - (++) HAL_I2C_AbortCpltCallback() - -@endverbatim - * @{ - */ - -/** - * @brief Transmits in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); - } - - while (hi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives in master mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - } - - while (hi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmits in slave mode an amount of data in blocking mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* If 10bit addressing mode is selected */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Wait until DIR flag is set Transmitter mode */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - while (hi2c->XferCount > 0U) - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - } - - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) - { - /* Normal use case for Transmitter mode */ - /* A NACK is generated to confirm the end of transfer */ - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - } - else - { - return HAL_ERROR; - } - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in blocking mode - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Wait until ADDR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Wait until DIR flag is reset Receiver mode */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - while (hi2c->XferCount > 0U) - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Store Last receive data if any */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - } - - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - } - - /* Wait until STOP flag is set */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Clear STOP flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Wait until BUSY flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) - { - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - return HAL_ERROR; - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in master mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) -{ - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receive in slave mode an amount of data in non-blocking mode with DMA - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) -{ - HAL_StatusTypeDef dmaxferstatus; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in blocking mode to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - - do - { - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - - } - while (hi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in blocking mode from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint32_t tickstart; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferISR = NULL; - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - } - - do - { - /* Wait until RXNE flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - while (hi2c->XferCount > 0U); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_IT; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - - /* Enable ERR, TC, STOP, NACK, RXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} -/** - * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address */ - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param pData Pointer to data buffer - * @param Size Amount of data to be read - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) -{ - uint32_t tickstart; - uint32_t xfermode; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Init tickstart for timeout management*/ - tickstart = HAL_GetTick(); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MEM; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferISR = I2C_Master_ISR_DMA; - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = I2C_AUTOEND_MODE; - } - - /* Send Slave Address and Memory Address */ - if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Checks if target device is ready for communication. - * @note This function is used with Memory devices - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param Trials Number of trials - * @param Timeout Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) -{ - uint32_t tickstart; - - __IO uint32_t I2C_Trials = 0UL; - - FlagStatus tmp1; - FlagStatus tmp2; - - if (hi2c->State == HAL_I2C_STATE_READY) - { - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) - { - return HAL_BUSY; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - do - { - /* Generate Start */ - hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); - - /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ - /* Wait until STOPF flag is set or a NACK flag is set*/ - tickstart = HAL_GetTick(); - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - - while ((tmp1 == RESET) && (tmp2 == RESET)) - { - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - - tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); - tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); - } - - /* Check if the NACKF flag has not been set */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) - { - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Device is ready */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Clear STOP Flag, auto generated with autoend*/ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - - /* Check if the maximum allowed number of trials has been reached */ - if (I2C_Trials == Trials) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - - /* Wait until STOPF flag is reset */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - } - - /* Increment Trials */ - I2C_Trials++; - } - while (I2C_Trials < Trials); - - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_WRITE; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_IT; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_WRITE; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_TX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_DMA; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to write */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to write and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_READ; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_IT; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - /* Send Slave Address and set NBYTES to read */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - uint32_t xfermode; - uint32_t xferrequest = I2C_GENERATE_START_READ; - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY_RX; - hi2c->Mode = HAL_I2C_MODE_MASTER; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Master_ISR_DMA; - - /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - xfermode = hi2c->XferOptions; - } - - /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ - /* Mean Previous state is same as current state */ - if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) - { - xferrequest = I2C_NO_STARTSTOP; - } - else - { - /* Convert OTHER_xxx XferOptions if any */ - I2C_ConvertOtherXferOptions(hi2c); - - /* Update xfermode accordingly if no reload is necessary */ - if (hi2c->XferCount <= MAX_NBYTE_SIZE) - { - xfermode = hi2c->XferOptions; - } - } - - if (hi2c->XferSize > 0U) - { - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Send Slave Address and set NBYTES to read */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR and NACK interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - else - { - /* Update Transfer ISR function pointer */ - hi2c->XferISR = I2C_Master_ISR_IT; - - /* Send Slave Address */ - /* Set NBYTES to read and generate START condition */ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, TC, STOP, NACK, TXI interrupt */ - /* possible to enable all of these */ - /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); - } - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Abort DMA Xfer if any */ - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_IT; - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave RX state to TX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; - - /* Set the DMA error callback */ - hi2c->hdmatx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmatx->XferHalfCpltCallback = NULL; - hi2c->hdmatx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Reset XferSize */ - hi2c->XferSize = 0; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* Enable ERR, STOP, NACK, ADDR interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_IT; - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA - * @note This interface allow to manage repeated start condition when a direction change during transfer - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param pData Pointer to data buffer - * @param Size Amount of data to be sent - * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) -{ - HAL_StatusTypeDef dmaxferstatus; - - /* Check the parameters */ - assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - if ((pData == NULL) || (Size == 0U)) - { - hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; - return HAL_ERROR; - } - - /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ - /* and then toggle the HAL slave TX state to RX state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Disable associated Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - /* Abort DMA Xfer if any */ - if (hi2c->hdmatx != NULL) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - } - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Abort DMA Xfer if any */ - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - } - } - else - { - /* Nothing to do */ - } - - hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; - hi2c->Mode = HAL_I2C_MODE_SLAVE; - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - - /* Enable Address Acknowledge */ - hi2c->Instance->CR2 &= ~I2C_CR2_NACK; - - /* Prepare transfer parameters */ - hi2c->pBuffPtr = pData; - hi2c->XferCount = Size; - hi2c->XferSize = hi2c->XferCount; - hi2c->XferOptions = XferOptions; - hi2c->XferISR = I2C_Slave_ISR_DMA; - - if (hi2c->hdmarx != NULL) - { - /* Set the I2C DMA transfer complete callback */ - hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; - - /* Set the DMA error callback */ - hi2c->hdmarx->XferErrorCallback = I2C_DMAError; - - /* Set the unused DMA callbacks to NULL */ - hi2c->hdmarx->XferHalfCpltCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize); - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (dmaxferstatus == HAL_OK) - { - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Reset XferSize */ - hi2c->XferSize = 0; - } - else - { - /* Update I2C state */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Update I2C error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - - if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) - { - /* Clear ADDR flag after prepare the transfer parameters */ - /* This action will generate an acknowledge to the Master */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - /* REnable ADDR interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); - - /* Enable DMA Request */ - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief Enable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->State == HAL_I2C_STATE_READY) - { - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->XferISR = I2C_Slave_ISR_IT; - - /* Enable the Address Match interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable the Address listen mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) -{ - /* Declaration of tmp to prevent undefined behavior of volatile usage */ - uint32_t tmp; - - /* Disable Address listen mode only if a transfer is not ongoing */ - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; - hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - /* Disable the Address Match interrupt */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Abort a master I2C IT or DMA process communication with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) -{ - if (hi2c->Mode == HAL_I2C_MODE_MASTER) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - /* Disable Interrupts and Store Previous state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Set State at HAL_I2C_STATE_ABORT */ - hi2c->State = HAL_I2C_STATE_ABORT; - - /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ - /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ - I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Note : The I2C interrupts must be enabled after unlocking current process - to avoid the risk of I2C interrupt handle execution before current - process unlock */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - - return HAL_OK; - } - else - { - /* Wrong usage of abort function */ - /* This function should be used only in case of abort monitored by master device */ - return HAL_ERROR; - } -} - -/** - * @} - */ - -/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks - * @{ - */ - -/** - * @brief This function handles I2C event interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - /* Get current IT Flags and IT sources value */ - uint32_t itflags = READ_REG(hi2c->Instance->ISR); - uint32_t itsources = READ_REG(hi2c->Instance->CR1); - - /* I2C events treatment -------------------------------------*/ - if (hi2c->XferISR != NULL) - { - hi2c->XferISR(hi2c, itflags, itsources); - } -} - -/** - * @brief This function handles I2C error interrupt request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) -{ - uint32_t itflags = READ_REG(hi2c->Instance->ISR); - uint32_t itsources = READ_REG(hi2c->Instance->CR1); - uint32_t tmperror; - - /* I2C Bus error interrupt occurred ------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; - - /* Clear BERR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); - } - - /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; - - /* Clear OVR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); - } - - /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ - if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; - - /* Clear ARLO flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); - } - - /* Store current volatile hi2c->ErrorCode, misra rule */ - tmperror = hi2c->ErrorCode; - - /* Call the Error Callback in case of Error detected */ - if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) - { - I2C_ITError(hi2c, tmperror); - } -} - -/** - * @brief Master Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Master Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MasterRxCpltCallback could be implemented in the user file - */ -} - -/** @brief Slave Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Slave Address Match callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION - * @param AddrMatchCode Address Match Code - * @retval None - */ -__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - UNUSED(TransferDirection); - UNUSED(AddrMatchCode); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AddrCallback() could be implemented in the user file - */ -} - -/** - * @brief Listen Complete callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ListenCpltCallback() could be implemented in the user file - */ -} - -/** - * @brief Memory Tx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemTxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief Memory Rx Transfer completed callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_MemRxCpltCallback could be implemented in the user file - */ -} - -/** - * @brief I2C error callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_ErrorCallback could be implemented in the user file - */ -} - -/** - * @brief I2C abort callback. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval None - */ -__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hi2c); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_I2C_AbortCpltCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions - * @brief Peripheral State, Mode and Error functions - * -@verbatim - =============================================================================== - ##### Peripheral State, Mode and Error functions ##### - =============================================================================== - [..] - This subsection permit to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the I2C handle state. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @retval HAL state - */ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) -{ - /* Return I2C handle state */ - return hi2c->State; -} - -/** - * @brief Returns the I2C Master, Slave, Memory or no mode. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for I2C module - * @retval HAL mode - */ -HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) -{ - return hi2c->Mode; -} - -/** -* @brief Return the I2C error code. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. -* @retval I2C Error Code -*/ -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) -{ - return hi2c->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup I2C_Private_Functions - * @{ - */ - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t tmpITFlags = ITFlags; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - /* No need to generate STOP, it is automatically done */ - /* Error callback will be send during stop flag treatment */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) - { - devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); - - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); - } - else - { - hi2c->XferSize = hi2c->XferCount; - if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP); - } - else - { - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); - } - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->XferCount == 0U) - { - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - } - else - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else - { - /* Nothing to do */ - } - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, tmpITFlags); - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint32_t tmpoptions = hi2c->XferOptions; - uint32_t tmpITFlags = ITFlags; - - /* Process locked */ - __HAL_LOCK(hi2c); - - /* Check if STOPF is set */ - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, tmpITFlags); - } - - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Check that I2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0*/ - /* So clear Flag NACKF only */ - if (hi2c->XferCount == 0U) - { - if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, tmpITFlags); - } - else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) - { - if (hi2c->XferCount > 0U) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferSize--; - hi2c->XferCount--; - } - - if ((hi2c->XferCount == 0U) && \ - (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) - { - I2C_ITAddrCplt(hi2c, tmpITFlags); - } - else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) - { - /* Write data to TXDR only if XferCount not reach "0" */ - /* A TXIS flag can be set, during STOP treatment */ - /* Check if all data have already been sent */ - /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ - if (hi2c->XferCount > 0U) - { - /* Write data to TXDR */ - hi2c->Instance->TXDR = *hi2c->pBuffPtr; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - hi2c->XferCount--; - hi2c->XferSize--; - } - else - { - if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) - { - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - } - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint16_t devaddress; - uint32_t xfermode; - - /* Process Locked */ - __HAL_LOCK(hi2c); - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set corresponding Error Code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* No need to generate STOP, it is automatically done */ - /* But enable STOP interrupt, to treat it */ - /* Error callback will be send during stop flag treatment */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - /* Disable TC interrupt */ - __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); - - if (hi2c->XferCount != 0U) - { - /* Recover Slave address */ - devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); - - /* Prepare the new XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - xfermode = I2C_RELOAD_MODE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - xfermode = hi2c->XferOptions; - } - else - { - xfermode = I2C_AUTOEND_MODE; - } - } - - /* Set the new XferSize in Nbytes register */ - I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); - - /* Update XferCount value */ - hi2c->XferCount -= hi2c->XferSize; - - /* Enable DMA Request */ - if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; - } - else - { - hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; - } - } - else - { - /* Call TxCpltCallback() if no stop mode is set */ - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - else - { - /* Wrong size Status regarding TCR flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) - { - if (hi2c->XferCount == 0U) - { - if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) - { - /* Generate a stop condition in case of no transfer option */ - if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) - { - /* Generate Stop */ - hi2c->Instance->CR2 |= I2C_CR2_STOP; - } - else - { - /* Call I2C Master Sequential complete process */ - I2C_ITMasterSeqCplt(hi2c); - } - } - } - else - { - /* Wrong size Status regarding TC flag event */ - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Master complete process */ - I2C_ITMasterCplt(hi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param ITFlags Interrupt flags to handle. - * @param ITSources Interrupt sources enabled. - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources) -{ - uint32_t tmpoptions = hi2c->XferOptions; - uint32_t treatdmanack = 0U; - HAL_I2C_StateTypeDef tmpstate; - - /* Process locked */ - __HAL_LOCK(hi2c); - - /* Check if STOPF is set */ - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, ITFlags); - } - - if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) - { - /* Check that I2C transfer finished */ - /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ - /* Mean XferCount == 0 */ - /* So clear Flag NACKF only */ - if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || - (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) - { - /* Split check of hdmarx, for MISRA compliance */ - if (hi2c->hdmarx != NULL) - { - if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) - { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) - { - treatdmanack = 1U; - } - } - } - - /* Split check of hdmatx, for MISRA compliance */ - if (hi2c->hdmatx != NULL) - { - if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) - { - if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U) - { - treatdmanack = 1U; - } - } - } - - if (treatdmanack == 1U) - { - if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */ - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, ITFlags); - } - else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else - { - /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - - /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ - tmpstate = hi2c->State; - - if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) - { - if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) - { - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - } - else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - } - } - else - { - /* Only Clear NACK Flag, no DMA treatment is pending */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - } - } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) - { - I2C_ITAddrCplt(hi2c, ITFlags); - } - else - { - /* Nothing to do */ - } - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for write request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) -{ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TCR flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Master sends target device address followed by internal memory address for read request. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param DevAddress Target device address: The device 7 bits address value - * in datasheet must be shifted to the left before calling the interface - * @param MemAddress Internal memory address - * @param MemAddSize Size of internal memory address - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) -{ - I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* If Memory address size is 8Bit */ - if (MemAddSize == I2C_MEMADD_SIZE_8BIT) - { - /* Send Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - /* If Memory address size is 16Bit */ - else - { - /* Send MSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); - - /* Wait until TXIS flag is set */ - if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Send LSB of Memory Address */ - hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); - } - - /* Wait until TC flag is set */ - if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief I2C Address complete process callback. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint8_t transferdirection; - uint16_t slaveaddrcode; - uint16_t ownadd1code; - uint16_t ownadd2code; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(ITFlags); - - /* In case of Listen state, need to inform upper layer of address match code event */ - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) - { - transferdirection = I2C_GET_DIR(hi2c); - slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); - ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); - ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); - - /* If 10bits addressing mode is selected */ - if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) - { - if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK)) - { - slaveaddrcode = ownadd1code; - hi2c->AddrEventCount++; - if (hi2c->AddrEventCount == 2U) - { - /* Reset Address Event counter */ - hi2c->AddrEventCount = 0U; - - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - slaveaddrcode = ownadd2code; - - /* Disable ADDR Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* else 7 bits addressing mode is selected */ - else - { - /* Disable ADDR Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call Slave Addr callback */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); -#else - HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* Else clear address flag only */ - else - { - /* Clear ADDR flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - } -} - -/** - * @brief I2C Master sequential complete process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) -{ - /* Reset I2C handle mode */ - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* No Generate Stop, to permit restart mode */ - /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - hi2c->XferISR = NULL; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ - else - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - hi2c->XferISR = NULL; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Slave sequential complete process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) -{ - uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); - - /* Reset I2C handle mode */ - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* If a DMA is ongoing, Update handle size context */ - if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - } - else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - } - else - { - /* Do nothing */ - } - - if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) - { - /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) - { - /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief I2C Master complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint32_t tmperror; - uint32_t tmpITFlags = ITFlags; - __IO uint32_t tmpreg; - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Disable Interrupts and Store Previous state */ - if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; - } - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - /* Reset handle parameters */ - hi2c->XferISR = NULL; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - - if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) - { - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Set acknowledge error code */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - /* Fetch Last receive data if any */ - if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) - { - /* Read data from RXDR */ - tmpreg = (uint8_t)hi2c->Instance->RXDR; - UNUSED(tmpreg); - } - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Store current volatile hi2c->ErrorCode, misra rule */ - tmperror = hi2c->ErrorCode; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - } - /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemTxCpltCallback(hi2c); -#else - HAL_I2C_MemTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterTxCpltCallback(hi2c); -#else - HAL_I2C_MasterTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - if (hi2c->Mode == HAL_I2C_MODE_MEM) - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MemRxCpltCallback(hi2c); -#else - HAL_I2C_MemRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->MasterRxCpltCallback(hi2c); -#else - HAL_I2C_MasterRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - } - else - { - /* Nothing to do */ - } -} - -/** - * @brief I2C Slave complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); - uint32_t tmpITFlags = ITFlags; - HAL_I2C_StateTypeDef tmpstate = hi2c->State; - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Disable Interrupts and Store Previous state */ - if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; - } - else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); - hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; - } - else - { - /* Do nothing */ - } - - /* Disable Address Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* If a DMA is ongoing, Update handle size context */ - if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - if (hi2c->hdmatx != NULL) - { - hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); - } - } - else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - if (hi2c->hdmarx != NULL) - { - hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); - } - } - else - { - /* Do nothing */ - } - - /* Store Last receive data if any */ - if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) - { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - if ((hi2c->XferSize > 0U)) - { - hi2c->XferSize--; - hi2c->XferCount--; - } - } - - /* All data are not transferred, so set error code accordingly */ - if (hi2c->XferCount != 0U) - { - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, hi2c->ErrorCode); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ - if (hi2c->State == HAL_I2C_STATE_LISTEN) - { - /* Call I2C Listen complete process */ - I2C_ITListenCplt(hi2c, tmpITFlags); - } - } - else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) - { - /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ - I2C_ITSlaveSeqCplt(hi2c); - - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - /* Call the corresponding callback to inform upper layer of End of Transfer */ - else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveRxCpltCallback(hi2c); -#else - HAL_I2C_SlaveRxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->SlaveTxCpltCallback(hi2c); -#else - HAL_I2C_SlaveTxCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Listen complete process. - * @param hi2c I2C handle. - * @param ITFlags Interrupt flags to handle. - * @retval None - */ -static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) -{ - /* Reset handle parameters */ - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->PreviousState = I2C_STATE_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferISR = NULL; - - /* Store Last receive data if any */ - if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) - { - /* Read data from RXDR */ - *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; - - /* Increment Buffer pointer */ - hi2c->pBuffPtr++; - - if ((hi2c->XferSize > 0U)) - { - hi2c->XferSize--; - hi2c->XferCount--; - - /* Set ErrorCode corresponding to a Non-Acknowledge */ - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - } - } - - /* Disable all Interrupts*/ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* Clear NACK Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ListenCpltCallback(hi2c); -#else - HAL_I2C_ListenCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ -} - -/** - * @brief I2C interrupts error process. - * @param hi2c I2C handle. - * @param ErrorCode Error code to handle. - * @retval None - */ -static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) -{ - HAL_I2C_StateTypeDef tmpstate = hi2c->State; - uint32_t tmppreviousstate; - - /* Reset handle parameters */ - hi2c->Mode = HAL_I2C_MODE_NONE; - hi2c->XferOptions = I2C_NO_OPTION_FRAME; - hi2c->XferCount = 0U; - - /* Set new error code */ - hi2c->ErrorCode |= ErrorCode; - - /* Disable Interrupts */ - if ((tmpstate == HAL_I2C_STATE_LISTEN) || - (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || - (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) - { - /* Disable all interrupts, except interrupts related to LISTEN state */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* keep HAL_I2C_STATE_LISTEN if set */ - hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->XferISR = I2C_Slave_ISR_IT; - } - else - { - /* Disable all interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); - - /* If state is an abort treatment on going, don't change state */ - /* This change will be do later */ - if (hi2c->State != HAL_I2C_STATE_ABORT) - { - /* Set HAL_I2C_STATE_READY */ - hi2c->State = HAL_I2C_STATE_READY; - } - hi2c->XferISR = NULL; - } - - /* Abort DMA TX transfer if any */ - tmppreviousstate = hi2c->PreviousState; - if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) - { - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - } - - if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Abort DMA TX */ - if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) - { - /* Call Directly XferAbortCallback function in case of error */ - hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); - } - } - else - { - I2C_TreatErrorCallback(hi2c); - } - } - /* Abort DMA RX transfer if any */ - else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) - { - if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) - { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - } - - if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) - { - /* Set the I2C DMA Abort callback : - will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ - hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Abort DMA RX */ - if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) - { - /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ - hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); - } - } - else - { - I2C_TreatErrorCallback(hi2c); - } - } - else - { - I2C_TreatErrorCallback(hi2c); - } -} - -/** - * @brief I2C Error callback treatment. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) -{ - if (hi2c->State == HAL_I2C_STATE_ABORT) - { - hi2c->State = HAL_I2C_STATE_READY; - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AbortCpltCallback(hi2c); -#else - HAL_I2C_AbortCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } - else - { - hi2c->PreviousState = I2C_STATE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ - } -} - -/** - * @brief I2C Tx data register flush process. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) -{ - /* If a pending TXIS flag is set */ - /* Write a dummy data in TXDR to clear it */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) - { - hi2c->Instance->TXDR = 0x00U; - } - - /* Flush TX register if not empty */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) - { - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); - } -} - -/** - * @brief DMA I2C master transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hi2c->pBuffPtr += hi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA I2C slave transmit process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tmpoptions = hi2c->XferOptions; - - if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; - - /* Last Byte is Transmitted */ - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA I2C master receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* If last transfer, enable STOP interrupt */ - if (hi2c->XferCount == 0U) - { - /* Enable STOP interrupt */ - I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); - } - /* else prepare a new DMA transfer and enable TCReload interrupt */ - else - { - /* Update Buffer pointer */ - hi2c->pBuffPtr += hi2c->XferSize; - - /* Set the XferSize to transfer */ - if (hi2c->XferCount > MAX_NBYTE_SIZE) - { - hi2c->XferSize = MAX_NBYTE_SIZE; - } - else - { - hi2c->XferSize = hi2c->XferCount; - } - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK) - { - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); - } - else - { - /* Enable TC interrupts */ - I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); - } - } -} - -/** - * @brief DMA I2C slave receive process complete callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - uint32_t tmpoptions = hi2c->XferOptions; - - if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \ - (tmpoptions != I2C_NO_OPTION_FRAME)) - { - /* Disable DMA Request */ - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; - - /* Call I2C Slave Sequential complete process */ - I2C_ITSlaveSeqCplt(hi2c); - } - else - { - /* No specific action, Master fully manage the generation of STOP condition */ - /* Mean that this generation can arrive at any time, at the end or during DMA process */ - /* So STOP condition should be manage through Interrupt treatment */ - } -} - -/** - * @brief DMA I2C communication error callback. - * @param hdma DMA handle - * @retval None - */ -static void I2C_DMAError(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Disable Acknowledge */ - hi2c->Instance->CR2 |= I2C_CR2_NACK; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ - I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); -} - -/** - * @brief DMA I2C communication abort callback - * (To be called at end of DMA Abort procedure). - * @param hdma DMA handle. - * @retval None - */ -static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) -{ - I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ - - /* Reset AbortCpltCallback */ - if (hi2c->hdmatx != NULL) - { - hi2c->hdmatx->XferAbortCallback = NULL; - } - if (hi2c->hdmarx != NULL) - { - hi2c->hdmarx->XferAbortCallback = NULL; - } - - I2C_TreatErrorCallback(hi2c); -} - -/** - * @brief This function handles I2C Communication Timeout. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Flag Specifies the I2C flag to check. - * @param Status The new Flag status (SET or RESET). - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) - { - /* Check if a NACK is detected */ - if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK) - { - return HAL_ERROR; - } - - /* Check if a STOPF is detected */ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) - { - /* Check if an RXNE is pending */ - /* Store Last receive data if any */ - if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) - { - /* Return HAL_OK */ - /* The Reading of data from RXDR will be done in caller function */ - return HAL_OK; - } - else - { - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->ErrorCode = HAL_I2C_ERROR_NONE; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - - /* Check for the Timeout */ - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - return HAL_OK; -} - -/** - * @brief This function handles Acknowledge failed detection during an I2C Communication. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param Timeout Timeout duration - * @param Tickstart Tick start value - * @retval HAL status - */ -static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) -{ - if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) - { - /* Wait until STOP Flag is reset */ - /* AutoEnd should be initiate after AF */ - while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) - { - /* Check for the Timeout */ - if (Timeout != HAL_MAX_DELAY) - { - if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) - { - hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - } - } - - /* Clear NACKF Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); - - /* Clear STOP Flag */ - __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - - /* Flush TX register */ - I2C_Flush_TXDR(hi2c); - - /* Clear Configuration Register 2 */ - I2C_RESET_CR2(hi2c); - - hi2c->ErrorCode |= HAL_I2C_ERROR_AF; - hi2c->State = HAL_I2C_STATE_READY; - hi2c->Mode = HAL_I2C_MODE_NONE; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_ERROR; - } - return HAL_OK; -} - -/** - * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). - * @param hi2c I2C handle. - * @param DevAddress Specifies the slave address to be programmed. - * @param Size Specifies the number of bytes to be programmed. - * This parameter must be a value between 0 and 255. - * @param Mode New state of the I2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref I2C_RELOAD_MODE Enable Reload mode . - * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. - * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. - * @param Request New state of the I2C START condition generation. - * This parameter can be one of the following values: - * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. - * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). - * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. - * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. - * @retval None - */ -static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_TRANSFER_MODE(Mode)); - assert_param(IS_TRANSFER_REQUEST(Request)); - - /* update CR2 register */ - MODIFY_REG(hi2c->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \ - (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request)); -} - -/** - * @brief Manage the enabling of Interrupts. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. - * @retval None - */ -static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ - (hi2c->XferISR == I2C_Slave_ISR_DMA)) - { - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK and ADDR interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if (InterruptRequest == I2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; - } - - if (InterruptRequest == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); - } - - if (InterruptRequest == I2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= I2C_IT_TCI; - } - } - else - { - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Enable ERR, STOP, NACK, and ADDR interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) - { - /* Enable ERR, TC, STOP, NACK and RXI interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; - } - - if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) - { - /* Enable ERR, TC, STOP, NACK and TXI interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; - } - - if (InterruptRequest == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; - } - } - - /* Enable interrupts only at the end */ - /* to avoid the risk of I2C interrupt handle execution before */ - /* all interrupts requested done */ - __HAL_I2C_ENABLE_IT(hi2c, tmpisr); -} - -/** - * @brief Manage the disabling of Interrupts. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2C. - * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. - * @retval None - */ -static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) -{ - uint32_t tmpisr = 0U; - - if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) - { - /* Disable TC and TXI interrupts */ - tmpisr |= I2C_IT_TCI | I2C_IT_TXI; - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - } - - if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) - { - /* Disable TC and RXI interrupts */ - tmpisr |= I2C_IT_TCI | I2C_IT_RXI; - - if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) - { - /* Disable NACK and STOP interrupts */ - tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - } - - if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) - { - /* Disable ADDR, NACK and STOP interrupts */ - tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; - } - - if (InterruptRequest == I2C_XFER_ERROR_IT) - { - /* Enable ERR and NACK interrupts */ - tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; - } - - if (InterruptRequest == I2C_XFER_CPLT_IT) - { - /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; - } - - if (InterruptRequest == I2C_XFER_RELOAD_IT) - { - /* Enable TC interrupts */ - tmpisr |= I2C_IT_TCI; - } - - /* Disable interrupts only at the end */ - /* to avoid a breaking situation like at "t" time */ - /* all disable interrupts request are not done */ - __HAL_I2C_DISABLE_IT(hi2c, tmpisr); -} - -/** - * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. - * @param hi2c I2C handle. - * @retval None - */ -static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) -{ - /* if user set XferOptions to I2C_OTHER_FRAME */ - /* it request implicitly to generate a restart condition */ - /* set XferOptions to I2C_FIRST_FRAME */ - if (hi2c->XferOptions == I2C_OTHER_FRAME) - { - hi2c->XferOptions = I2C_FIRST_FRAME; - } - /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ - /* it request implicitly to generate a restart condition */ - /* then generate a stop condition at the end of transfer */ - /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ - else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) - { - hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; - } - else - { - /* Nothing to do */ - } -} - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c deleted file mode 100644 index 61116b1..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c +++ /dev/null @@ -1,325 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_i2c_ex.c - * @author MCD Application Team - * @brief I2C Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of I2C Extended peripheral: - * + Extended features functions - * - @verbatim - ============================================================================== - ##### I2C peripheral Extended features ##### - ============================================================================== - - [..] Comparing to other previous devices, the I2C interface for STM32WBxx - devices contains the following additional features - - (+) Possibility to disable or enable Analog Noise Filter - (+) Use of a configured Digital Noise Filter - (+) Disable or enable wakeup from Stop mode(s) - (+) Disable or enable Fast Mode Plus - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure Noise Filter and Wake Up Feature - (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() - (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() - (#) Configure the enable or disable of I2C Wake Up Mode using the functions : - (++) HAL_I2CEx_EnableWakeUp() - (++) HAL_I2CEx_DisableWakeUp() - (#) Configure the enable or disable of fast mode plus driving capability using the functions : - (++) HAL_I2CEx_EnableFastModePlus() - (++) HAL_I2CEx_DisableFastModePlus() - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal.h" - -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @defgroup I2CEx I2CEx - * @brief I2C Extended HAL module driver - * @{ - */ - -#ifdef HAL_I2C_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions - * @{ - */ - -/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure Noise Filters - (+) Configure Wake Up Feature - (+) Configure Fast Mode Plus - -@endverbatim - * @{ - */ - -/** - * @brief Configure I2C Analog noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param AnalogFilter New state of the Analog filter. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Reset I2Cx ANOFF bit */ - hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); - - /* Set analog filter bit*/ - hi2c->Instance->CR1 |= AnalogFilter; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configure I2C Digital noise filter. - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) -{ - uint32_t tmpreg; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); - assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Get the old register value */ - tmpreg = hi2c->Instance->CR1; - - /* Reset I2Cx DNF bits [11:8] */ - tmpreg &= ~(I2C_CR1_DNF); - - /* Set I2Cx DNF coefficient */ - tmpreg |= DigitalFilter << 8U; - - /* Store the new register value */ - hi2c->Instance->CR1 = tmpreg; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable I2C wakeup from Stop mode(s). - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) -{ - /* Check the parameters */ - assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Enable wakeup from stop mode */ - hi2c->Instance->CR1 |= I2C_CR1_WUPEN; - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Disable I2C wakeup from Stop mode(s). - * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains - * the configuration information for the specified I2Cx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) -{ - /* Check the parameters */ - assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); - - if (hi2c->State == HAL_I2C_STATE_READY) - { - /* Process Locked */ - __HAL_LOCK(hi2c); - - hi2c->State = HAL_I2C_STATE_BUSY; - - /* Disable the selected I2C peripheral */ - __HAL_I2C_DISABLE(hi2c); - - /* Enable wakeup from stop mode */ - hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); - - __HAL_I2C_ENABLE(hi2c); - - hi2c->State = HAL_I2C_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hi2c); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Enable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be enabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C3 pins fast mode plus driving capability can be enabled - * only by using I2C_FASTMODEPLUS_I2C3 parameter. - * @retval None - */ -void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Enable fast mode plus driving capability for selected pin */ - SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); -} - -/** - * @brief Disable the I2C fast mode plus driving capability. - * @param ConfigFastModePlus Selects the pin. - * This parameter can be one of the @ref I2CEx_FastModePlus values - * @note For I2C1, fast mode plus driving capability can be disabled on all selected - * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently - * on each one of the following pins PB6, PB7, PB8 and PB9. - * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability - * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. - * @note For all I2C3 pins fast mode plus driving capability can be disabled - * only by using I2C_FASTMODEPLUS_I2C3 parameter. - * @retval None - */ -void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) -{ - /* Check the parameter */ - assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); - - /* Disable fast mode plus driving capability for selected pin */ - CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_I2C_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c deleted file mode 100644 index 4d05a7f..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c +++ /dev/null @@ -1,2162 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_pcd.c - * @author MCD Application Team - * @brief PCD HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The PCD HAL driver can be used as follows: - - (#) Declare a PCD_HandleTypeDef handle structure, for example: - PCD_HandleTypeDef hpcd; - - (#) Fill parameters of Init structure in HCD handle - - (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) - - (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: - (##) Enable the PCD/USB Low Level interface clock using - (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device only FS peripheral - - (##) Initialize the related GPIO clocks - (##) Configure PCD pin-out - (##) Configure PCD NVIC interrupt - - (#)Associate the Upper USB device stack to the HAL PCD Driver: - (##) hpcd.pData = pdev; - - (#)Enable PCD transmission and reception: - (##) HAL_PCD_Start(); - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal.h" - -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @defgroup PCD PCD - * @brief PCD HAL module driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined (USB) - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ -#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) -#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) -/** - * @} - */ - -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup PCD_Private_Functions PCD Private Functions - * @{ - */ - -static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); -static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); -static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the PCD according to the specified - * parameters in the PCD_InitTypeDef and initialize the associated handle. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) -{ - uint8_t i; - - /* Check the PCD handle allocation */ - if (hpcd == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); - - if (hpcd->State == HAL_PCD_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hpcd->Lock = HAL_UNLOCKED; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SOFCallback = HAL_PCD_SOFCallback; - hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; - hpcd->ResetCallback = HAL_PCD_ResetCallback; - hpcd->SuspendCallback = HAL_PCD_SuspendCallback; - hpcd->ResumeCallback = HAL_PCD_ResumeCallback; - hpcd->ConnectCallback = HAL_PCD_ConnectCallback; - hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; - hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; - hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; - hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; - hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; - - if (hpcd->MspInitCallback == NULL) - { - hpcd->MspInitCallback = HAL_PCD_MspInit; - } - - /* Init the low level hardware */ - hpcd->MspInitCallback(hpcd); -#else - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_PCD_MspInit(hpcd); -#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Disable the Interrupts */ - __HAL_PCD_DISABLE(hpcd); - - /* Init endpoints structures */ - for (i = 0U; i < hpcd->Init.dev_endpoints; i++) - { - /* Init ep structure */ - hpcd->IN_ep[i].is_in = 1U; - hpcd->IN_ep[i].num = i; - hpcd->IN_ep[i].tx_fifo_num = i; - /* Control until ep is activated */ - hpcd->IN_ep[i].type = EP_TYPE_CTRL; - hpcd->IN_ep[i].maxpacket = 0U; - hpcd->IN_ep[i].xfer_buff = 0U; - hpcd->IN_ep[i].xfer_len = 0U; - } - - for (i = 0U; i < hpcd->Init.dev_endpoints; i++) - { - hpcd->OUT_ep[i].is_in = 0U; - hpcd->OUT_ep[i].num = i; - /* Control until ep is activated */ - hpcd->OUT_ep[i].type = EP_TYPE_CTRL; - hpcd->OUT_ep[i].maxpacket = 0U; - hpcd->OUT_ep[i].xfer_buff = 0U; - hpcd->OUT_ep[i].xfer_len = 0U; - } - - /* Init Device */ - (void)USB_DevInit(hpcd->Instance, hpcd->Init); - - hpcd->USB_Address = 0U; - hpcd->State = HAL_PCD_STATE_READY; - - /* Activate LPM */ - if (hpcd->Init.lpm_enable == 1U) - { - (void)HAL_PCDEx_ActivateLPM(hpcd); - } - - return HAL_OK; -} - -/** - * @brief DeInitializes the PCD peripheral. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) -{ - /* Check the PCD handle allocation */ - if (hpcd == NULL) - { - return HAL_ERROR; - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Stop Device */ - if (USB_StopDevice(hpcd->Instance) != HAL_OK) - { - return HAL_ERROR; - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - if (hpcd->MspDeInitCallback == NULL) - { - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ - } - - /* DeInit the low level hardware */ - hpcd->MspDeInitCallback(hpcd); -#else - /* DeInit the low level hardware: CLOCK, NVIC.*/ - HAL_PCD_MspDeInit(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - hpcd->State = HAL_PCD_STATE_RESET; - - return HAL_OK; -} - -/** - * @brief Initializes the PCD MSP. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes PCD MSP. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspDeInit could be implemented in the user file - */ -} - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) -/** - * @brief Register a User USB PCD Callback - * To be used instead of the weak predefined callback - * @param hpcd USB PCD handle - * @param CallbackID ID of the callback to be registered - * This parameter can be one of the following values: - * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID - * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID - * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID - * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID - * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID - * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID - * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID - * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @param pCallback pointer to the Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, - HAL_PCD_CallbackIDTypeDef CallbackID, - pPCD_CallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - return HAL_ERROR; - } - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_PCD_SOF_CB_ID : - hpcd->SOFCallback = pCallback; - break; - - case HAL_PCD_SETUPSTAGE_CB_ID : - hpcd->SetupStageCallback = pCallback; - break; - - case HAL_PCD_RESET_CB_ID : - hpcd->ResetCallback = pCallback; - break; - - case HAL_PCD_SUSPEND_CB_ID : - hpcd->SuspendCallback = pCallback; - break; - - case HAL_PCD_RESUME_CB_ID : - hpcd->ResumeCallback = pCallback; - break; - - case HAL_PCD_CONNECT_CB_ID : - hpcd->ConnectCallback = pCallback; - break; - - case HAL_PCD_DISCONNECT_CB_ID : - hpcd->DisconnectCallback = pCallback; - break; - - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = pCallback; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hpcd->State == HAL_PCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = pCallback; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = pCallback; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - return status; -} - -/** - * @brief Unregister an USB PCD Callback - * USB PCD callabck is redirected to the weak predefined callback - * @param hpcd USB PCD handle - * @param CallbackID ID of the callback to be unregistered - * This parameter can be one of the following values: - * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID - * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID - * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID - * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID - * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID - * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID - * @arg @ref HAL_PCD_DISCONNECT_CB_ID OTG PCD Disconnect callback ID - * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID - * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - /* Setup Legacy weak Callbacks */ - if (hpcd->State == HAL_PCD_STATE_READY) - { - switch (CallbackID) - { - case HAL_PCD_SOF_CB_ID : - hpcd->SOFCallback = HAL_PCD_SOFCallback; - break; - - case HAL_PCD_SETUPSTAGE_CB_ID : - hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; - break; - - case HAL_PCD_RESET_CB_ID : - hpcd->ResetCallback = HAL_PCD_ResetCallback; - break; - - case HAL_PCD_SUSPEND_CB_ID : - hpcd->SuspendCallback = HAL_PCD_SuspendCallback; - break; - - case HAL_PCD_RESUME_CB_ID : - hpcd->ResumeCallback = HAL_PCD_ResumeCallback; - break; - - case HAL_PCD_CONNECT_CB_ID : - hpcd->ConnectCallback = HAL_PCD_ConnectCallback; - break; - - case HAL_PCD_DISCONNECT_CB_ID : - hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; - break; - - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = HAL_PCD_MspInit; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else if (hpcd->State == HAL_PCD_STATE_RESET) - { - switch (CallbackID) - { - case HAL_PCD_MSPINIT_CB_ID : - hpcd->MspInitCallback = HAL_PCD_MspInit; - break; - - case HAL_PCD_MSPDEINIT_CB_ID : - hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; - break; - - default : - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - break; - } - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - return status; -} - -/** - * @brief Register USB PCD Data OUT Stage Callback - * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Data OUT Stage Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataOutStageCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataOutStageCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Data OUT Stage Callback - * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Data IN Stage Callback - * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Data IN Stage Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, - pPCD_DataInStageCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataInStageCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Data IN Stage Callback - * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Iso OUT incomplete Callback - * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoOutIncpltCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOOUTIncompleteCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Iso OUT incomplete Callback - * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD Iso IN incomplete Callback - * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, - pPCD_IsoInIncpltCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOINIncompleteCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD Iso IN incomplete Callback - * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD BCD Callback - * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD BCD Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD BCD Callback - * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Register USB PCD LPM Callback - * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @param pCallback pointer to the USB PCD LPM Callback function - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) -{ - HAL_StatusTypeDef status = HAL_OK; - - if (pCallback == NULL) - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - return HAL_ERROR; - } - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = pCallback; - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} - -/** - * @brief Unregister the USB PCD LPM Callback - * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process locked */ - __HAL_LOCK(hpcd); - - if (hpcd->State == HAL_PCD_STATE_READY) - { - hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ - } - else - { - /* Update the error code */ - hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; - - /* Return error status */ - status = HAL_ERROR; - } - - /* Release Lock */ - __HAL_UNLOCK(hpcd); - - return status; -} -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Start the USB device - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - __HAL_PCD_ENABLE(hpcd); - (void)USB_DevConnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Stop the USB device. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - __HAL_PCD_DISABLE(hpcd); - (void)USB_DevDisconnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - - -/** - * @brief This function handles PCD interrupt request. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) -{ - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR)) - { - /* servicing of the endpoint correct transfer interrupt */ - /* clear of the CTR flag into the sub */ - (void)PCD_EP_ISR_Handler(hpcd); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_RESET)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ResetCallback(hpcd); -#else - HAL_PCD_ResetCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - (void)HAL_PCD_SetAddress(hpcd, 0U); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_PMAOVR)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ERR)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_WKUP)) - { - hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_LPMODE); - hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_FSUSP); - - if (hpcd->LPM_State == LPM_L1) - { - hpcd->LPM_State = LPM_L0; -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); -#else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->ResumeCallback(hpcd); -#else - HAL_PCD_ResumeCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SUSP)) - { - /* Force low-power mode in the macrocell */ - hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_FSUSP; - - /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); - - hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_LPMODE; - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SuspendCallback(hpcd); -#else - HAL_PCD_SuspendCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - /* Handle LPM Interrupt */ - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_L1REQ)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_L1REQ); - if (hpcd->LPM_State == LPM_L0) - { - /* Force suspend and low-power mode before going to L1 state*/ - hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_LPMODE; - hpcd->Instance->CNTR |= (uint16_t)USB_CNTR_FSUSP; - - hpcd->LPM_State = LPM_L1; - hpcd->BESL = ((uint32_t)hpcd->Instance->LPMCSR & USB_LPMCSR_BESL) >> 2; -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); -#else - HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SuspendCallback(hpcd); -#else - HAL_PCD_SuspendCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_SOF)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); - -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SOFCallback(hpcd); -#else - HAL_PCD_SOFCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_ESOF)) - { - /* clear ESOF flag in ISTR */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); - } -} - - -/** - * @brief Data OUT stage callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataOutStageCallback could be implemented in the user file - */ -} - -/** - * @brief Data IN stage callback - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataInStageCallback could be implemented in the user file - */ -} -/** - * @brief Setup stage callback - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SetupStageCallback could be implemented in the user file - */ -} - -/** - * @brief USB Start Of Frame callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SOFCallback could be implemented in the user file - */ -} - -/** - * @brief USB Reset callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResetCallback could be implemented in the user file - */ -} - -/** - * @brief Suspend event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SuspendCallback could be implemented in the user file - */ -} - -/** - * @brief Resume event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResumeCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO OUT callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO IN callback. - * @param hpcd PCD handle - * @param epnum endpoint number - * @retval None - */ -__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Connection event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ConnectCallback could be implemented in the user file - */ -} - -/** - * @brief Disconnection event callback. - * @param hpcd PCD handle - * @retval None - */ -__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DisconnectCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Connect the USB device - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - (void)USB_DevConnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Disconnect the USB device. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - (void)USB_DevDisconnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Set the USB Device address. - * @param hpcd PCD handle - * @param address new device address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) -{ - __HAL_LOCK(hpcd); - hpcd->USB_Address = address; - (void)USB_SetDevAddress(hpcd->Instance, address); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} -/** - * @brief Open and configure an endpoint. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param ep_mps endpoint max packet size - * @param ep_type endpoint type - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, - uint16_t ep_mps, uint8_t ep_type) -{ - HAL_StatusTypeDef ret = HAL_OK; - PCD_EPTypeDef *ep; - - if ((ep_addr & 0x80U) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - - ep->num = ep_addr & EP_ADDR_MSK; - ep->maxpacket = ep_mps; - ep->type = ep_type; - - if (ep->is_in != 0U) - { - /* Assign a Tx FIFO */ - ep->tx_fifo_num = ep->num; - } - /* Set initial data PID. */ - if (ep_type == EP_TYPE_BULK) - { - ep->data_pid_start = 0U; - } - - __HAL_LOCK(hpcd); - (void)USB_ActivateEndpoint(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - - return ret; -} - -/** - * @brief Deactivate an endpoint. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if ((ep_addr & 0x80U) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - (void)USB_DeactivateEndpoint(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - - -/** - * @brief Receive an amount of data. - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param pBuf pointer to the reception buffer - * @param len amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep; - - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_count = 0U; - ep->is_in = 0U; - ep->num = ep_addr & EP_ADDR_MSK; - - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0StartXfer(hpcd->Instance, ep); - } - else - { - (void)USB_EPStartXfer(hpcd->Instance, ep); - } - - return HAL_OK; -} - -/** - * @brief Get Received Data Size - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval Data Size - */ -uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; -} -/** - * @brief Send an amount of data - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @param pBuf pointer to the transmission buffer - * @param len amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep; - - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_fill_db = 1U; - ep->xfer_len_db = len; - ep->xfer_count = 0U; - ep->is_in = 1U; - ep->num = ep_addr & EP_ADDR_MSK; - - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0StartXfer(hpcd->Instance, ep); - } - else - { - (void)USB_EPStartXfer(hpcd->Instance, ep); - } - - return HAL_OK; -} - -/** - * @brief Set a STALL condition over an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) - { - return HAL_ERROR; - } - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - ep->is_in = 0U; - } - - ep->is_stall = 1U; - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - - (void)USB_EPSetStall(hpcd->Instance, ep); - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Clear a STALL condition over in an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep; - - if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) - { - return HAL_ERROR; - } - - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 1U; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; - ep->is_in = 0U; - } - - ep->is_stall = 0U; - ep->num = ep_addr & EP_ADDR_MSK; - - __HAL_LOCK(hpcd); - (void)USB_EPClearStall(hpcd->Instance, ep); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Flush an endpoint - * @param hpcd PCD handle - * @param ep_addr endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(ep_addr); - - return HAL_OK; -} - -/** - * @brief Activate remote wakeup signalling - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return (USB_ActivateRemoteWakeup(hpcd->Instance)); -} - -/** - * @brief De-activate remote wakeup signalling. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return (USB_DeActivateRemoteWakeup(hpcd->Instance)); -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the PCD handle state. - * @param hpcd PCD handle - * @retval HAL state - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) -{ - return hpcd->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup PCD_Private_Functions - * @{ - */ - - -/** - * @brief This function handles PCD Endpoint interrupt request. - * @param hpcd PCD handle - * @retval HAL status - */ -static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) -{ - PCD_EPTypeDef *ep; - uint16_t count, wIstr, wEPVal, TxByteNbre; - uint8_t epindex; - - /* stay in loop while pending interrupts */ - while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) - { - wIstr = hpcd->Instance->ISTR; - - /* extract highest priority endpoint number */ - epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); - - if (epindex == 0U) - { - /* Decode and service control endpoint interrupt */ - - /* DIR bit = origin of the interrupt */ - if ((wIstr & USB_ISTR_DIR) == 0U) - { - /* DIR = 0 */ - - /* DIR = 0 => IN int */ - /* DIR = 0 implies that (EP_CTR_TX = 1) always */ - PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); - ep = &hpcd->IN_ep[0]; - - ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - ep->xfer_buff += ep->xfer_count; - - /* TX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, 0U); -#else - HAL_PCD_DataInStageCallback(hpcd, 0U); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - if ((hpcd->USB_Address > 0U) && (ep->xfer_len == 0U)) - { - hpcd->Instance->DADDR = ((uint16_t)hpcd->USB_Address | USB_DADDR_EF); - hpcd->USB_Address = 0U; - } - } - else - { - /* DIR = 1 */ - - /* DIR = 1 & CTR_RX => SETUP or OUT int */ - /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ - ep = &hpcd->OUT_ep[0]; - wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); - - if ((wEPVal & USB_EP_SETUP) != 0U) - { - /* Get SETUP Packet */ - ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - - USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, - ep->pmaadress, (uint16_t)ep->xfer_count); - - /* SETUP bit kept frozen while CTR_RX = 1 */ - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); - - /* Process SETUP Packet*/ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->SetupStageCallback(hpcd); -#else - HAL_PCD_SetupStageCallback(hpcd); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else if ((wEPVal & USB_EP_CTR_RX) != 0U) - { - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); - - /* Get Control Data OUT Packet */ - ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - - if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, - ep->pmaadress, (uint16_t)ep->xfer_count); - - ep->xfer_buff += ep->xfer_count; - - /* Process Control Data OUT Packet */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, 0U); -#else - HAL_PCD_DataOutStageCallback(hpcd, 0U); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - if ((PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0) & USB_EP_SETUP) == 0U) - { - PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); - PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); - } - } - } - } - else - { - /* Decode and service non control endpoints interrupt */ - /* process related endpoint register */ - wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); - - if ((wEPVal & USB_EP_CTR_RX) != 0U) - { - /* clear int flag */ - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); - ep = &hpcd->OUT_ep[epindex]; - - /* OUT Single Buffering */ - if (ep->doublebuffer == 0U) - { - count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); - } - } - else - { - /* manage double buffer bulk out */ - if (ep->type == EP_TYPE_BULK) - { - count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); - } - else /* manage double buffer iso out */ - { - /* free EP OUT Buffer */ - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); - - if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) - { - /* read from endpoint BUF0Addr buffer */ - count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); - - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); - } - } - else - { - /* read from endpoint BUF1Addr buffer */ - count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); - - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); - } - } - } - } - /* multi-packet on the NON control OUT endpoint */ - ep->xfer_count += count; - ep->xfer_buff += count; - - if ((ep->xfer_len == 0U) || (count < ep->maxpacket)) - { - /* RX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, ep->num); -#else - HAL_PCD_DataOutStageCallback(hpcd, ep->num); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - (void) USB_EPStartXfer(hpcd->Instance, ep); - } - - } - - if ((wEPVal & USB_EP_CTR_TX) != 0U) - { - ep = &hpcd->IN_ep[epindex]; - - /* clear int flag */ - PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); - - /* Manage Bulk Single Buffer Transaction */ - if ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U)) - { - /* multi-packet on the NON control IN endpoint */ - TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - - if (ep->xfer_len > TxByteNbre) - { - ep->xfer_len -= TxByteNbre; - } - else - { - ep->xfer_len = 0U; - } - - /* Zero Length Packet? */ - if (ep->xfer_len == 0U) - { - /* TX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, ep->num); -#else - HAL_PCD_DataInStageCallback(hpcd, ep->num); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - /* Transfer is not yet Done */ - ep->xfer_buff += TxByteNbre; - ep->xfer_count += TxByteNbre; - (void)USB_EPStartXfer(hpcd->Instance, ep); - } - } - /* Double Buffer Iso/bulk IN (bulk transfer Len > Ep_Mps) */ - else - { - (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); - } - } - } - } - - return HAL_OK; -} - - -/** - * @brief Manage double buffer bulk out transaction from ISR - * @param hpcd PCD handle - * @param ep current endpoint handle - * @param wEPVal Last snapshot of EPRx register value taken in ISR - * @retval HAL status - */ -static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, - PCD_EPTypeDef *ep, uint16_t wEPVal) -{ - uint16_t count; - - /* Manage Buffer0 OUT */ - if ((wEPVal & USB_EP_DTOG_RX) != 0U) - { - /* Get count of received Data on buffer0 */ - count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); - - if (ep->xfer_len >= count) - { - ep->xfer_len -= count; - } - else - { - ep->xfer_len = 0U; - } - - if (ep->xfer_len == 0U) - { - /* set NAK to OUT endpoint since double buffer is enabled */ - PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); - } - - /* Check if Buffer1 is in blocked sate which requires to toggle */ - if ((wEPVal & USB_EP_DTOG_TX) != 0U) - { - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); - } - - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); - } - } - /* Manage Buffer 1 DTOG_RX=0 */ - else - { - /* Get count of received data */ - count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); - - if (ep->xfer_len >= count) - { - ep->xfer_len -= count; - } - else - { - ep->xfer_len = 0U; - } - - if (ep->xfer_len == 0U) - { - /* set NAK on the current endpoint */ - PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); - } - - /*Need to FreeUser Buffer*/ - if ((wEPVal & USB_EP_DTOG_TX) == 0U) - { - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); - } - - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); - } - } - - return count; -} - - -/** - * @brief Manage double buffer bulk IN transaction from ISR - * @param hpcd PCD handle - * @param ep current endpoint handle - * @param wEPVal Last snapshot of EPRx register value taken in ISR - * @retval HAL status - */ -static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, - PCD_EPTypeDef *ep, uint16_t wEPVal) -{ - uint32_t len; - uint16_t TxByteNbre; - - /* Data Buffer0 ACK received */ - if ((wEPVal & USB_EP_DTOG_TX) != 0U) - { - /* multi-packet on the NON control IN endpoint */ - TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); - - if (ep->xfer_len > TxByteNbre) - { - ep->xfer_len -= TxByteNbre; - } - else - { - ep->xfer_len = 0U; - } - /* Transfer is completed */ - if (ep->xfer_len == 0U) - { - PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); - PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); - - /* TX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, ep->num); -#else - HAL_PCD_DataInStageCallback(hpcd, ep->num); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - if ((wEPVal & USB_EP_DTOG_RX) != 0U) - { - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); - } - } - else /* Transfer is not yet Done */ - { - /* need to Free USB Buff */ - if ((wEPVal & USB_EP_DTOG_RX) != 0U) - { - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); - } - - /* Still there is data to Fill in the next Buffer */ - if (ep->xfer_fill_db == 1U) - { - ep->xfer_buff += TxByteNbre; - ep->xfer_count += TxByteNbre; - - /* Calculate the len of the new buffer to fill */ - if (ep->xfer_len_db >= ep->maxpacket) - { - len = ep->maxpacket; - ep->xfer_len_db -= len; - } - else if (ep->xfer_len_db == 0U) - { - len = TxByteNbre; - ep->xfer_fill_db = 0U; - } - else - { - ep->xfer_fill_db = 0U; - len = ep->xfer_len_db; - ep->xfer_len_db = 0U; - } - - /* Write remaining Data to Buffer */ - /* Set the Double buffer counter for pma buffer1 */ - PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); - - /* Copy user buffer to USB PMA */ - USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); - } - } - } - else /* Data Buffer1 ACK received */ - { - /* multi-packet on the NON control IN endpoint */ - TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); - - if (ep->xfer_len >= TxByteNbre) - { - ep->xfer_len -= TxByteNbre; - } - else - { - ep->xfer_len = 0U; - } - - /* Transfer is completed */ - if (ep->xfer_len == 0U) - { - PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); - PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); - - /* TX COMPLETE */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, ep->num); -#else - HAL_PCD_DataInStageCallback(hpcd, ep->num); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - /* need to Free USB Buff */ - if ((wEPVal & USB_EP_DTOG_RX) == 0U) - { - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); - } - } - else /* Transfer is not yet Done */ - { - /* need to Free USB Buff */ - if ((wEPVal & USB_EP_DTOG_RX) == 0U) - { - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); - } - - /* Still there is data to Fill in the next Buffer */ - if (ep->xfer_fill_db == 1U) - { - ep->xfer_buff += TxByteNbre; - ep->xfer_count += TxByteNbre; - - /* Calculate the len of the new buffer to fill */ - if (ep->xfer_len_db >= ep->maxpacket) - { - len = ep->maxpacket; - ep->xfer_len_db -= len; - } - else if (ep->xfer_len_db == 0U) - { - len = TxByteNbre; - ep->xfer_fill_db = 0U; - } - else - { - len = ep->xfer_len_db; - ep->xfer_len_db = 0U; - ep->xfer_fill_db = 0; - } - - /* Set the Double buffer counter for pmabuffer1 */ - PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); - - /* Copy the user buffer to USB PMA */ - USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); - } - } - } - - /*enable endpoint IN*/ - PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); - - return HAL_OK; -} - - - -/** - * @} - */ -#endif /* defined (USB) */ -#endif /* HAL_PCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c deleted file mode 100644 index e6f93a2..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c +++ /dev/null @@ -1,336 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_hal_pcd_ex.c - * @author MCD Application Team - * @brief PCD Extended HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Extended features functions - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal.h" - -/** @addtogroup STM32WBxx_HAL_Driver - * @{ - */ - -/** @defgroup PCDEx PCDEx - * @brief PCD Extended HAL module driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined (USB) -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ - -/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @brief PCDEx control functions - * -@verbatim - =============================================================================== - ##### Extended features functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Update FIFO configuration - -@endverbatim - * @{ - */ - -/** - * @brief Configure PMA for EP - * @param hpcd Device instance - * @param ep_addr endpoint address - * @param ep_kind endpoint Kind - * USB_SNG_BUF: Single Buffer used - * USB_DBL_BUF: Double Buffer used - * @param pmaadress: EP address in The PMA: In case of single buffer endpoint - * this parameter is 16-bit value providing the address - * in PMA allocated to endpoint. - * In case of double buffer endpoint this parameter - * is a 32-bit value providing the endpoint buffer 0 address - * in the LSB part of 32-bit value and endpoint buffer 1 address - * in the MSB part of 32-bit value. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, - uint16_t ep_kind, uint32_t pmaadress) -{ - PCD_EPTypeDef *ep; - - /* initialize ep structure*/ - if ((0x80U & ep_addr) == 0x80U) - { - ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - } - - /* Here we check if the endpoint is single or double Buffer*/ - if (ep_kind == PCD_SNG_BUF) - { - /* Single Buffer */ - ep->doublebuffer = 0U; - /* Configure the PMA */ - ep->pmaadress = (uint16_t)pmaadress; - } - else /* USB_DBL_BUF */ - { - /* Double Buffer Endpoint */ - ep->doublebuffer = 1U; - /* Configure the PMA */ - ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU); - ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16); - } - - return HAL_OK; -} - -/** - * @brief Activate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - hpcd->battery_charging_active = 1U; - - /* Enable BCD feature */ - USBx->BCDR |= USB_BCDR_BCDEN; - - /* Enable DCD : Data Contact Detect */ - USBx->BCDR &= ~(USB_BCDR_PDEN); - USBx->BCDR &= ~(USB_BCDR_SDEN); - USBx->BCDR |= USB_BCDR_DCDEN; - - return HAL_OK; -} - -/** - * @brief Deactivate BatteryCharging feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - hpcd->battery_charging_active = 0U; - - /* Disable BCD feature */ - USBx->BCDR &= ~(USB_BCDR_BCDEN); - - return HAL_OK; -} - -/** - * @brief Handle BatteryCharging Process. - * @param hpcd PCD handle - * @retval HAL status - */ -void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - uint32_t tickstart = HAL_GetTick(); - - /* Wait Detect flag or a timeout is happen*/ - while ((USBx->BCDR & USB_BCDR_DCDET) == 0U) - { - /* Check for the Timeout */ - if ((HAL_GetTick() - tickstart) > 1000U) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - - return; - } - } - - HAL_Delay(200U); - - /* Data Pin Contact ? Check Detect flag */ - if ((USBx->BCDR & USB_BCDR_DCDET) == USB_BCDR_DCDET) - { -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - /* Primary detection: checks if connected to Standard Downstream Port - (without charging capability) */ - USBx->BCDR &= ~(USB_BCDR_DCDEN); - HAL_Delay(50U); - USBx->BCDR |= (USB_BCDR_PDEN); - HAL_Delay(50U); - - /* If Charger detect ? */ - if ((USBx->BCDR & USB_BCDR_PDET) == USB_BCDR_PDET) - { - /* Start secondary detection to check connection to Charging Downstream - Port or Dedicated Charging Port */ - USBx->BCDR &= ~(USB_BCDR_PDEN); - HAL_Delay(50U); - USBx->BCDR |= (USB_BCDR_SDEN); - HAL_Delay(50U); - - /* If CDP ? */ - if ((USBx->BCDR & USB_BCDR_SDET) == USB_BCDR_SDET) - { - /* Dedicated Downstream Port DCP */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - else - { - /* Charging Downstream Port CDP */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - } - else /* NO */ - { - /* Standard Downstream Port */ -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ - } - - /* Battery Charging capability discovery finished Start Enumeration */ - (void)HAL_PCDEx_DeActivateBCD(hpcd); -#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#else - HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); -#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ -} - - -/** - * @brief Activate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) -{ - - USB_TypeDef *USBx = hpcd->Instance; - hpcd->lpm_active = 1U; - hpcd->LPM_State = LPM_L0; - - USBx->LPMCSR |= USB_LPMCSR_LMPEN; - USBx->LPMCSR |= USB_LPMCSR_LPMACK; - - return HAL_OK; -} - -/** - * @brief Deactivate LPM feature. - * @param hpcd PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) -{ - USB_TypeDef *USBx = hpcd->Instance; - - hpcd->lpm_active = 0U; - - USBx->LPMCSR &= ~(USB_LPMCSR_LMPEN); - USBx->LPMCSR &= ~(USB_LPMCSR_LPMACK); - - return HAL_OK; -} - - - -/** - * @brief Send LPM message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_LPM_Callback could be implemented in the user file - */ -} - -/** - * @brief Send BatteryCharging message to user layer callback. - * @param hpcd PCD handle - * @param msg LPM message - * @retval HAL status - */ -__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(msg); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCDEx_BCD_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB) */ -#endif /* HAL_PCD_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c b/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c deleted file mode 100644 index 538a565..0000000 --- a/nucleo-wb55-i2c/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c +++ /dev/null @@ -1,849 +0,0 @@ -/** - ****************************************************************************** - * @file stm32wbxx_ll_usb.c - * @author MCD Application Team - * @brief USB Low Layer HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization/de-initialization functions - * + I/O operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. - - (#) Call USB_CoreInit() API to initialize the USB Core peripheral. - - (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32wbxx_hal.h" - -/** @addtogroup STM32WBxx_LL_USB_DRIVER - * @{ - */ - -#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) -#if defined (USB) -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - - -/** - * @brief Initializes the USB Core - * @param USBx USB Instance - * @param cfg pointer to a USB_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(cfg); - - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - - return HAL_OK; -} - -/** - * @brief USB_EnableGlobalInt - * Enables the controller's Global Int in the AHB Config reg - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) -{ - uint32_t winterruptmask; - - /* Clear pending interrupts */ - USBx->ISTR = 0U; - - /* Set winterruptmask variable */ - winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | - USB_CNTR_SUSPM | USB_CNTR_ERRM | - USB_CNTR_SOFM | USB_CNTR_ESOFM | - USB_CNTR_RESETM | USB_CNTR_L1REQM; - - /* Set interrupt mask */ - USBx->CNTR = (uint16_t)winterruptmask; - - return HAL_OK; -} - -/** - * @brief USB_DisableGlobalInt - * Disable the controller's Global Int in the AHB Config reg - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) -{ - uint32_t winterruptmask; - - /* Set winterruptmask variable */ - winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | - USB_CNTR_SUSPM | USB_CNTR_ERRM | - USB_CNTR_SOFM | USB_CNTR_ESOFM | - USB_CNTR_RESETM | USB_CNTR_L1REQM; - - /* Clear interrupt mask */ - USBx->CNTR &= (uint16_t)(~winterruptmask); - - return HAL_OK; -} - -/** - * @brief USB_SetCurrentMode Set functional mode - * @param USBx Selected device - * @param mode current core mode - * This parameter can be one of the these values: - * @arg USB_DEVICE_MODE Peripheral mode - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(mode); - - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_DevInit Initializes the USB controller registers - * for device mode - * @param USBx Selected device - * @param cfg pointer to a USB_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(cfg); - - /* Init Device */ - /* CNTR_FRES = 1 */ - USBx->CNTR = (uint16_t)USB_CNTR_FRES; - - /* CNTR_FRES = 0 */ - USBx->CNTR = 0U; - - /* Clear pending interrupts */ - USBx->ISTR = 0U; - - /*Set Btable Address*/ - USBx->BTABLE = BTABLE_ADDRESS; - - return HAL_OK; -} - -#if defined (HAL_PCD_MODULE_ENABLED) -/** - * @brief Activate and configure an endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - HAL_StatusTypeDef ret = HAL_OK; - uint16_t wEpRegVal; - - wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK; - - /* initialize Endpoint */ - switch (ep->type) - { - case EP_TYPE_CTRL: - wEpRegVal |= USB_EP_CONTROL; - break; - - case EP_TYPE_BULK: - wEpRegVal |= USB_EP_BULK; - break; - - case EP_TYPE_INTR: - wEpRegVal |= USB_EP_INTERRUPT; - break; - - case EP_TYPE_ISOC: - wEpRegVal |= USB_EP_ISOCHRONOUS; - break; - - default: - ret = HAL_ERROR; - break; - } - - PCD_SET_ENDPOINT(USBx, ep->num, (wEpRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); - - PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); - - if (ep->doublebuffer == 0U) - { - if (ep->is_in != 0U) - { - /*Set the endpoint Transmit buffer address */ - PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - if (ep->type != EP_TYPE_ISOC) - { - /* Configure NAK status for the Endpoint */ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); - } - else - { - /* Configure TX Endpoint to disabled state */ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - } - else - { - /*Set the endpoint Receive buffer address */ - PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); - - /*Set the endpoint Receive buffer counter*/ - PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); - PCD_CLEAR_RX_DTOG(USBx, ep->num); - - /* Configure VALID status for the Endpoint*/ - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - } - } - /*Double Buffer*/ - else - { - /* Set the endpoint as double buffered */ - PCD_SET_EP_DBUF(USBx, ep->num); - - /* Set buffer address for double buffered mode */ - PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1); - - if (ep->is_in == 0U) - { - /* Clear the data toggle bits for the endpoint IN/OUT */ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - else - { - /* Clear the data toggle bits for the endpoint IN/OUT */ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - if (ep->type != EP_TYPE_ISOC) - { - /* Configure NAK status for the Endpoint */ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); - } - else - { - /* Configure TX Endpoint to disabled state */ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - } - } - - return ret; -} - -/** - * @brief De-activate and de-initialize an endpoint - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - if (ep->doublebuffer == 0U) - { - if (ep->is_in != 0U) - { - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - /* Configure DISABLE status for the Endpoint*/ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - else - { - PCD_CLEAR_RX_DTOG(USBx, ep->num); - - /* Configure DISABLE status for the Endpoint*/ - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - } - } - /*Double Buffer*/ - else - { - if (ep->is_in == 0U) - { - /* Clear the data toggle bits for the endpoint IN/OUT*/ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - /* Reset value of the data toggle bits for the endpoint out*/ - PCD_TX_DTOG(USBx, ep->num); - - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - else - { - /* Clear the data toggle bits for the endpoint IN/OUT*/ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - PCD_RX_DTOG(USBx, ep->num); - - /* Configure DISABLE status for the Endpoint*/ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - } - } - - return HAL_OK; -} - -/** - * @brief USB_EPStartXfer setup and starts a transfer over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - uint32_t len; - uint16_t pmabuffer; - uint16_t wEPVal; - - /* IN endpoint */ - if (ep->is_in == 1U) - { - /*Multi packet transfer*/ - if (ep->xfer_len > ep->maxpacket) - { - len = ep->maxpacket; - } - else - { - len = ep->xfer_len; - } - - /* configure and validate Tx endpoint */ - if (ep->doublebuffer == 0U) - { - USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len); - PCD_SET_EP_TX_CNT(USBx, ep->num, len); - } - else - { - /* double buffer bulk management */ - if (ep->type == EP_TYPE_BULK) - { - if (ep->xfer_len_db > ep->maxpacket) - { - /* enable double buffer */ - PCD_SET_EP_DBUF(USBx, ep->num); - - /* each Time to write in PMA xfer_len_db will */ - ep->xfer_len_db -= len; - - /* Fill the two first buffer in the Buffer0 & Buffer1 */ - if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) - { - /* Set the Double buffer counter for pmabuffer1 */ - PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr1; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - ep->xfer_buff += len; - - if (ep->xfer_len_db > ep->maxpacket) - { - ep->xfer_len_db -= len; - } - else - { - len = ep->xfer_len_db; - ep->xfer_len_db = 0U; - } - - /* Set the Double buffer counter for pmabuffer0 */ - PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr0; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - } - else - { - /* Set the Double buffer counter for pmabuffer0 */ - PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr0; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - ep->xfer_buff += len; - - if (ep->xfer_len_db > ep->maxpacket) - { - ep->xfer_len_db -= len; - } - else - { - len = ep->xfer_len_db; - ep->xfer_len_db = 0U; - } - - /* Set the Double buffer counter for pmabuffer1 */ - PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr1; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - } - } - /* auto Switch to single buffer mode when transfer xfer_len_db; - - /* disable double buffer mode */ - PCD_CLEAR_EP_DBUF(USBx, ep->num); - - /* Set Tx count with nbre of byte to be transmitted */ - PCD_SET_EP_TX_CNT(USBx, ep->num, len); - pmabuffer = ep->pmaaddr0; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - } - }/* end if bulk double buffer */ - - /* manage isochronous double buffer IN mode */ - else - { - /* enable double buffer */ - PCD_SET_EP_DBUF(USBx, ep->num); - - /* each Time to write in PMA xfer_len_db will */ - ep->xfer_len_db -= len; - - /* Fill the data buffer */ - if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) - { - /* Set the Double buffer counter for pmabuffer1 */ - PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr1; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - ep->xfer_buff += len; - - if (ep->xfer_len_db > ep->maxpacket) - { - ep->xfer_len_db -= len; - } - else - { - len = ep->xfer_len_db; - ep->xfer_len_db = 0U; - } - - if (len > 0U) - { - /* Set the Double buffer counter for pmabuffer0 */ - PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr0; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - } - } - else - { - /* Set the Double buffer counter for pmabuffer0 */ - PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr0; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - ep->xfer_buff += len; - - if (ep->xfer_len_db > ep->maxpacket) - { - ep->xfer_len_db -= len; - } - else - { - len = ep->xfer_len_db; - ep->xfer_len_db = 0U; - } - - if (len > 0U) - { - /* Set the Double buffer counter for pmabuffer1 */ - PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr1; - - /* Write the user buffer to USB PMA */ - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - } - } - } - } - - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); - } - else /* OUT endpoint */ - { - if (ep->doublebuffer == 0U) - { - /* Multi packet transfer */ - if (ep->xfer_len > ep->maxpacket) - { - len = ep->maxpacket; - ep->xfer_len -= len; - } - else - { - len = ep->xfer_len; - ep->xfer_len = 0U; - } - /* configure and validate Rx endpoint */ - PCD_SET_EP_RX_CNT(USBx, ep->num, len); - } - else - { - /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */ - /* Set the Double buffer counter */ - if (ep->type == EP_TYPE_BULK) - { - PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket); - - /* Coming from ISR */ - if (ep->xfer_count != 0U) - { - /* update last value to check if there is blocking state */ - wEPVal = PCD_GET_ENDPOINT(USBx, ep->num); - - /*Blocking State */ - if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || - (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) - { - PCD_FreeUserBuffer(USBx, ep->num, 0U); - } - } - } - /* iso out double */ - else if (ep->type == EP_TYPE_ISOC) - { - /* Multi packet transfer */ - if (ep->xfer_len > ep->maxpacket) - { - len = ep->maxpacket; - ep->xfer_len -= len; - } - else - { - len = ep->xfer_len; - ep->xfer_len = 0U; - } - PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); - } - else - { - return HAL_ERROR; - } - } - - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - } - - return HAL_OK; -} - - -/** - * @brief USB_EPSetStall set a stall condition over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - if (ep->is_in != 0U) - { - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL); - } - else - { - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL); - } - - return HAL_OK; -} - -/** - * @brief USB_EPClearStall Clear a stall condition over an EP - * @param USBx Selected device - * @param ep pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - if (ep->doublebuffer == 0U) - { - if (ep->is_in != 0U) - { - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - if (ep->type != EP_TYPE_ISOC) - { - /* Configure NAK status for the Endpoint */ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); - } - } - else - { - PCD_CLEAR_RX_DTOG(USBx, ep->num); - - /* Configure VALID status for the Endpoint */ - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - } - } - - return HAL_OK; -} -#endif - -/** - * @brief USB_StopDevice Stop the usb device mode - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx) -{ - /* disable all interrupts and force USB reset */ - USBx->CNTR = (uint16_t)USB_CNTR_FRES; - - /* clear interrupt status register */ - USBx->ISTR = 0U; - - /* switch-off device */ - USBx->CNTR = (uint16_t)(USB_CNTR_FRES | USB_CNTR_PDWN); - - return HAL_OK; -} - -/** - * @brief USB_SetDevAddress Stop the usb device mode - * @param USBx Selected device - * @param address new device address to be assigned - * This parameter can be a value from 0 to 255 - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address) -{ - if (address == 0U) - { - /* set device address and enable function */ - USBx->DADDR = (uint16_t)USB_DADDR_EF; - } - - return HAL_OK; -} - -/** - * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx) -{ - /* Enabling DP Pull-UP bit to Connect internal PU resistor on USB DP line */ - USBx->BCDR |= (uint16_t)USB_BCDR_DPPU; - - return HAL_OK; -} - -/** - * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx) -{ - /* Disable DP Pull-Up bit to disconnect the Internal PU resistor on USB DP line */ - USBx->BCDR &= (uint16_t)(~(USB_BCDR_DPPU)); - - return HAL_OK; -} - -/** - * @brief USB_ReadInterrupts return the global USB interrupt status - * @param USBx Selected device - * @retval HAL status - */ -uint32_t USB_ReadInterrupts(USB_TypeDef *USBx) -{ - uint32_t tmpreg; - - tmpreg = USBx->ISTR; - return tmpreg; -} - -/** - * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx) -{ - USBx->CNTR |= (uint16_t)USB_CNTR_RESUME; - - return HAL_OK; -} - -/** - * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling - * @param USBx Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx) -{ - USBx->CNTR &= (uint16_t)(~USB_CNTR_RESUME); - - return HAL_OK; -} - -/** - * @brief Copy a buffer from user memory area to packet memory area (PMA) - * @param USBx USB peripheral instance register address. - * @param pbUsrBuf pointer to user memory area. - * @param wPMABufAddr address into PMA. - * @param wNBytes no. of bytes to be copied. - * @retval None - */ -void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) -{ - uint32_t n = ((uint32_t)wNBytes + 1U) >> 1; - uint32_t BaseAddr = (uint32_t)USBx; - uint32_t i, temp1, temp2; - __IO uint16_t *pdwVal; - uint8_t *pBuf = pbUsrBuf; - - pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); - - for (i = n; i != 0U; i--) - { - temp1 = *pBuf; - pBuf++; - temp2 = temp1 | ((uint16_t)((uint16_t) *pBuf << 8)); - *pdwVal = (uint16_t)temp2; - pdwVal++; - -#if PMA_ACCESS > 1U - pdwVal++; -#endif - - pBuf++; - } -} - -/** - * @brief Copy data from packet memory area (PMA) to user memory buffer - * @param USBx USB peripheral instance register address. - * @param pbUsrBuf pointer to user memory area. - * @param wPMABufAddr address into PMA. - * @param wNBytes no. of bytes to be copied. - * @retval None - */ -void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) -{ - uint32_t n = (uint32_t)wNBytes >> 1; - uint32_t BaseAddr = (uint32_t)USBx; - uint32_t i, temp; - __IO uint16_t *pdwVal; - uint8_t *pBuf = pbUsrBuf; - - pdwVal = (__IO uint16_t *)(BaseAddr + 0x400U + ((uint32_t)wPMABufAddr * PMA_ACCESS)); - - for (i = n; i != 0U; i--) - { - temp = *(__IO uint16_t *)pdwVal; - pdwVal++; - *pBuf = (uint8_t)((temp >> 0) & 0xFFU); - pBuf++; - *pBuf = (uint8_t)((temp >> 8) & 0xFFU); - pBuf++; - -#if PMA_ACCESS > 1U - pdwVal++; -#endif - } - - if ((wNBytes % 2U) != 0U) - { - temp = *pdwVal; - *pBuf = (uint8_t)((temp >> 0) & 0xFFU); - } -} - - -/** - * @} - */ - -/** - * @} - */ -#endif /* defined (USB) */ -#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/nucleo-wb55-i2c/nucleo-wb55-i2c.ioc b/nucleo-wb55-i2c/nucleo-wb55-i2c.ioc index fe2df0c..bbb99bb 100644 --- a/nucleo-wb55-i2c/nucleo-wb55-i2c.ioc +++ b/nucleo-wb55-i2c/nucleo-wb55-i2c.ioc @@ -2,90 +2,81 @@ Mcu.Family=STM32WB ProjectManager.MainLocation=Core/Src RCC.USART1Freq_Value=32000000 -RCC.SAI1Freq_Value=48000000 +RCC.SAI1Freq_Value=128000000 RCC.CortexFreq_Value=32000000 ProjectManager.KeepUserCode=true Mcu.UserName=STM32WB55RGVx -RCC.SMPSCLockSelectionVirtualVirtual=RCC_SMPSCLKSOURCE_HSI RCC.RFWKPFreq_Value=976.5625 -RCC.PLLSAI1RoutputFreq_Value=48000000 -USART1.WordLength=WORDLENGTH_7B +RCC.SMPSCLockSelectionVirtualVirtual=RCC_SMPSCLKSOURCE_HSI +RCC.PLLSAI1RoutputFreq_Value=128000000 +USART1.WordLength=WORDLENGTH_8B PA14.GPIO_Label=JTCK -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USB_PCD_Init-USB-false-HAL-true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true PD0.GPIO_Label=B2 [Push Button] -PA11.Mode=Device PB0.GPIO_Label=LD2 [Green Led] PB6.GPIO_Label=STLINK_RX PD0.Locked=true -USART1.IPParameters=VirtualMode-Asynchronous,WordLength +USART1.IPParameters=VirtualMode-Asynchronous,WordLength,Parity PinOutPanel.RotationAngle=0 RCC.MCO1PinFreq_Value=32000000 -RCC.SYSCLKSource=RCC_SYSCLKSOURCE_HSE ProjectManager.StackSize=0x400 PB5.GPIOParameters=GPIO_Label RCC.LPTIM1Freq_Value=32000000 RCC.I2C3Freq_Value=32000000 -Mcu.IP4=USART1 RCC.FCLKCortexFreq_Value=32000000 -Mcu.IP5=USB -I2C1.IPParameters=Timing NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false -Mcu.IP2=RCC -Mcu.IP3=SYS -Mcu.IP0=I2C1 +Mcu.IP2=SYS +Mcu.IP3=USART1 +Mcu.IP0=NVIC PA12.Locked=true -Mcu.IP1=NVIC +Mcu.IP1=RCC PA12.Signal=USB_DP Mcu.UserConstants= -RCC.VCOSAI1OutputFreq_Value=96000000 +RCC.VCOSAI1OutputFreq_Value=256000000 Mcu.ThirdPartyNb=0 RCC.HCLKFreq_Value=32000000 -Mcu.IPNb=6 +Mcu.IPNb=4 ProjectManager.PreviousToolchain= RCC.APB2TimFreq_Value=32000000 PCC.Ble.PowerLevel=Min PB6.Signal=USART1_TX PB6.Mode=Asynchronous -Mcu.Pin6=OSC_OUT +Mcu.Pin6=PB0 PD0.Signal=GPIO_Input -Mcu.Pin7=OSC_IN -Mcu.Pin8=PB0 -OSC_OUT.Mode=HSE-External-Oscillator -Mcu.Pin9=PB1 +Mcu.Pin7=PB1 +Mcu.Pin8=PA11 +Mcu.Pin9=PA12 OSC_OUT.Signal=RCC_OSC_OUT RCC.AHBFreq_Value=32000000 Mcu.Pin0=PC13 Mcu.Pin1=PC14-OSC32_IN Mcu.Pin2=PC15-OSC32_OUT -Mcu.Pin3=PB8 -Mcu.Pin4=PB9 -Mcu.Pin5=PC4 +Mcu.Pin3=PC4 +Mcu.Pin4=OSC_OUT +Mcu.Pin5=OSC_IN ProjectManager.ProjectBuild=false RCC.HSE_VALUE=32000000 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false RCC.FCLK2Freq_Value=32000000 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false -PB3.Mode=Trace_Asynchronous_SW -PD1.GPIOParameters=GPIO_Label NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +PD1.GPIOParameters=GPIO_Label PD1.GPIO_Label=B3 [Push Button] ProjectManager.FirmwarePackage=STM32Cube FW_WB V1.11.1 MxDb.Version=DB.6.0.21 PB0.GPIOParameters=GPIO_Label ProjectManager.BackupPrevious=false -PC14-OSC32_IN.Mode=LSE-External-Oscillator -RCC.VCOInputFreq_Value=4000000 +RCC.VCOInputFreq_Value=32000000 PC4.GPIO_Label=B1 [Push Button] -PA14.Mode=Trace_Asynchronous_SW +PA14.Mode=Serial_Wire PB1.GPIO_Label=LD3 [Red Led] File.Version=6 PB3.GPIOParameters=GPIO_Label PB7.Signal=USART1_RX -PB8.Locked=true -RCC.PLLRCLKFreq_Value=64000000 +RCC.PLLRCLKFreq_Value=128000000 PB6.Locked=true NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false -PB6.GPIOParameters=GPIO_PuPd,GPIO_Label +PB6.GPIOParameters=GPIO_Label ProjectManager.HalAssertFull=false PB0.Locked=true ProjectManager.ProjectName=nucleo-wb55-i2c @@ -93,7 +84,6 @@ RCC.APB3Freq_Value=16000000 PA13.GPIOParameters=GPIO_Label PB7.GPIO_Label=STLINK_TX Mcu.Package=VFQFPN68 -PB9.Signal=I2C1_SDA PB1.Signal=GPIO_Output PA14.Locked=true ProjectManager.ToolChainLocation= @@ -101,7 +91,7 @@ RCC.LSI_VALUE=32000 VP_SYS_VS_Systick.Signal=SYS_VS_Systick RCC.LSCOPinFreq_Value=32000 PB5.GPIO_Label=LD1 [Blue Led] -RCC.PLLPoutputFreq_Value=64000000 +RCC.PLLPoutputFreq_Value=128000000 RCC.APB1TimFreq_Value=32000000 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false PC4.Locked=true @@ -110,21 +100,18 @@ RCC.SMPSDivider=1 ProjectManager.CustomerFirmwarePackage= PC4.GPIOParameters=GPIO_Label PC14-OSC32_IN.Locked=true +RCC.MSIClockRange=RCC_MSIRANGE_10 RCC.HSI48_VALUE=48000000 PB3.Locked=true -RCC.PLLSAI1N=24 PB3.GPIO_Label=JTDO -PB7.GPIO_PuPd=GPIO_PULLUP PCC.Ble.Mode=NOT_SELECTED -PC15-OSC32_OUT.Mode=LSE-External-Oscillator -RCC.PLLQoutputFreq_Value=64000000 +RCC.PLLQoutputFreq_Value=128000000 ProjectManager.ProjectFileName=nucleo-wb55-i2c.ioc -Mcu.PinsNb=21 +Mcu.PinsNb=19 ProjectManager.NoMain=false PC13.Locked=true RCC.HCLK3Freq_Value=32000000 PC13.Signal=SYS_WKUP2 -PB6.GPIO_PuPd=GPIO_PULLUP PC4.Signal=GPIO_Input PD1.Signal=GPIO_Input ProjectManager.DefaultFWLocation=true @@ -139,22 +126,21 @@ PA13.Signal=SYS_JTMS-SWDIO PA11.Locked=true PC15-OSC32_OUT.Locked=true ProjectManager.TargetToolchain=STM32CubeIDE -PB7.GPIOParameters=GPIO_PuPd,GPIO_Label +PB7.GPIOParameters=GPIO_Label RCC.HCLKRFFreq_Value=16000000 -PB9.Mode=I2C -I2C1.Timing=0x00707CBB -PB9.Locked=true +USART1.Parity=PARITY_NONE PB5.Locked=true ProjectManager.RegisterCallBack= OSC_IN.Signal=RCC_OSC_IN -RCC.USBFreq_Value=48000000 +RCC.USBFreq_Value=128000000 +RCC.LSE_VALUE=32768 PC15-OSC32_OUT.Signal=RCC_OSC32_OUT -RCC.PLLSAI1PoutputFreq_Value=48000000 +RCC.PLLSAI1PoutputFreq_Value=128000000 PB1.Locked=true RCC.SMPSCLockSelectionVirtual=RCC_SMPSCLKSOURCE_HSI board=P-NUCLEO-WB55-Nucleo RCC.Cortex2Freq_Value=32000000 -RCC.VCOOutputFreq_Value=128000000 +RCC.VCOOutputFreq_Value=256000000 ProjectManager.LastFirmware=true RCC.SMPS1Freq_Value=16000000 RCC.APB2Freq_Value=32000000 @@ -162,15 +148,14 @@ MxCube.Version=6.2.1 PCC.Ble.DataLength=6 RCC.I2C1Freq_Value=32000000 RCC.RNGFreq_Value=32000 -RCC.PLLSAI1QoutputFreq_Value=48000000 -RCC.ADCFreq_Value=48000000 +RCC.PLLSAI1QoutputFreq_Value=128000000 +RCC.ADCFreq_Value=128000000 VP_SYS_VS_Systick.Mode=SysTick NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false OSC_OUT.Locked=true -PA13.Mode=Trace_Asynchronous_SW -PC13.Mode=SYS_WakeUp1 +PA13.Mode=Serial_Wire ProjectManager.FreePins=false -RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,Cortex2Freq_Value,CortexFreq_Value,FCLK2Freq_Value,FCLKCortexFreq_Value,FamilyName,HCLK2Freq_Value,HCLK3Freq_Value,HCLKFreq_Value,HCLKRFFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PWRFreq_Value,RFWKPFreq_Value,RNGFreq_Value,SAI1Freq_Value,SMPS1Freq_Value,SMPSCLockSelectionVirtual,SMPSCLockSelectionVirtualVirtual,SMPSDivider,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value +RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,Cortex2Freq_Value,CortexFreq_Value,FCLK2Freq_Value,FCLKCortexFreq_Value,FamilyName,HCLK2Freq_Value,HCLK3Freq_Value,HCLKFreq_Value,HCLKRFFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,MSIClockRange,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PWRFreq_Value,RFWKPFreq_Value,RNGFreq_Value,SAI1Freq_Value,SMPS1Freq_Value,SMPSCLockSelectionVirtual,SMPSCLockSelectionVirtualVirtual,SMPSDivider,SYSCLKFreq_VALUE,USART1Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value ProjectManager.AskForMigrate=true Mcu.Name=STM32WB55RGVx RCC.LPTIM2Freq_Value=32000000 @@ -180,12 +165,9 @@ ProjectManager.CoupleFile=false PB3.Signal=SYS_JTDO-SWO RCC.SYSCLKFreq_VALUE=32000000 PB5.Signal=GPIO_Output -Mcu.Pin20=VP_SYS_VS_Systick -PA12.Mode=Device PCC.Ble.ConnectionInterval=1000.0 NVIC.ForceEnableDMAVector=true KeepUserPlacement=false -OSC_IN.Mode=HSE-External-Oscillator PA14.GPIOParameters=GPIO_Label NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false PA13.Locked=true @@ -194,25 +176,21 @@ PB7.Mode=Asynchronous PA11.Signal=USB_DM PA14.Signal=SYS_JTCK-SWCLK ProjectManager.HeapSize=0x200 -Mcu.Pin15=PD1 +Mcu.Pin15=PB5 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -Mcu.Pin16=PB3 -Mcu.Pin13=PA14 -Mcu.Pin14=PD0 -Mcu.Pin19=PB7 +Mcu.Pin16=PB6 +Mcu.Pin13=PD1 +Mcu.Pin14=PB3 ProjectManager.ComputerToolchain=false -Mcu.Pin17=PB5 +Mcu.Pin17=PB7 RCC.HSI_VALUE=16000000 -Mcu.Pin18=PB6 +Mcu.Pin18=VP_SYS_VS_Systick NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 -Mcu.Pin11=PA12 +Mcu.Pin11=PA14 +Mcu.Pin12=PD0 PD0.GPIOParameters=GPIO_Label -Mcu.Pin12=PA13 -RCC.PLLN=32 -PB8.Mode=I2C -Mcu.Pin10=PA11 +Mcu.Pin10=PA13 PB7.Locked=true -PB8.Signal=I2C1_SCL RCC.PWRFreq_Value=32000000 RCC.APB1Freq_Value=32000000 PD1.Locked=true