Browse Source

zigbee: Enable RTC

test
Andreas Berthoud 5 years ago
parent
commit
af0fa71e96
  1. 4
      nucleo-wb55-zigbee/.mxproject
  2. 2
      nucleo-wb55-zigbee/Core/Inc/stm32wbxx_hal_conf.h
  3. 45
      nucleo-wb55-zigbee/Core/Src/main.c
  4. 46
      nucleo-wb55-zigbee/Core/Src/stm32wbxx_hal_msp.c
  5. 991
      nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h
  6. 1335
      nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc_ex.h
  7. 1868
      nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c
  8. 1912
      nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c
  9. 162
      nucleo-wb55-zigbee/nucleo-wb55-zigbee.ioc

4
nucleo-wb55-zigbee/.mxproject

File diff suppressed because one or more lines are too long

2
nucleo-wb55-zigbee/Core/Inc/stm32wbxx_hal_conf.h

@ -48,7 +48,7 @@
/*#define HAL_PKA_MODULE_ENABLED */
/*#define HAL_QSPI_MODULE_ENABLED */
/*#define HAL_RNG_MODULE_ENABLED */
/*#define HAL_RTC_MODULE_ENABLED */
#define HAL_RTC_MODULE_ENABLED
/*#define HAL_SAI_MODULE_ENABLED */
/*#define HAL_SMBUS_MODULE_ENABLED */
/*#define HAL_SMARTCARD_MODULE_ENABLED */

45
nucleo-wb55-zigbee/Core/Src/main.c

@ -40,6 +40,7 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
RTC_HandleTypeDef hrtc;
/* USER CODE BEGIN PV */
@ -48,6 +49,7 @@
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_RTC_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
@ -85,6 +87,7 @@ int main(void)
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_RTC_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
@ -118,12 +121,14 @@ void SystemClock_Config(void)
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI1
|RCC_OSCILLATORTYPE_MSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_10;
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
@ -147,7 +152,8 @@ void SystemClock_Config(void)
}
/** Initializes the peripherals clocks
*/
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS;
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RTC;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSI;
PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE0;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
@ -159,6 +165,41 @@ void SystemClock_Config(void)
/* USER CODE END Smps */
}
/**
* @brief RTC Initialization Function
* @param None
* @retval None
*/
static void MX_RTC_Init(void)
{
/* USER CODE BEGIN RTC_Init 0 */
/* USER CODE END RTC_Init 0 */
/* USER CODE BEGIN RTC_Init 1 */
/* USER CODE END RTC_Init 1 */
/** Initialize RTC Only
*/
hrtc.Instance = RTC;
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
hrtc.Init.AsynchPrediv = 127;
hrtc.Init.SynchPrediv = 255;
hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE;
if (HAL_RTC_Init(&hrtc) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN RTC_Init 2 */
/* USER CODE END RTC_Init 2 */
}
/**
* @brief GPIO Initialization Function
* @param None

46
nucleo-wb55-zigbee/Core/Src/stm32wbxx_hal_msp.c

@ -74,6 +74,52 @@ void HAL_MspInit(void)
/* USER CODE END MspInit 1 */
}
/**
* @brief RTC MSP Initialization
* This function configures the hardware resources used in this example
* @param hrtc: RTC handle pointer
* @retval None
*/
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
{
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspInit 0 */
/* USER CODE END RTC_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_RTC_ENABLE();
__HAL_RCC_RTCAPB_CLK_ENABLE();
/* USER CODE BEGIN RTC_MspInit 1 */
/* USER CODE END RTC_MspInit 1 */
}
}
/**
* @brief RTC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hrtc: RTC handle pointer
* @retval None
*/
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
{
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspDeInit 0 */
/* USER CODE END RTC_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_RTC_DISABLE();
__HAL_RCC_RTCAPB_CLK_DISABLE();
/* USER CODE BEGIN RTC_MspDeInit 1 */
/* USER CODE END RTC_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

991
nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h

@ -0,0 +1,991 @@
/**
******************************************************************************
* @file stm32wbxx_hal_rtc.h
* @author MCD Application Team
* @brief Header file of RTC HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32WBxx_HAL_RTC_H
#define STM32WBxx_HAL_RTC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32wbxx_hal_def.h"
/* Include low level driver */
#include "stm32wbxx_ll_exti.h"
/** @addtogroup STM32WBxx_HAL_Driver
* @{
*/
/** @defgroup RTC RTC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RTC_Exported_Types RTC Exported Types
* @{
*/
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */
HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */
HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */
HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */
HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */
}HAL_RTCStateTypeDef;
/**
* @brief RTC Configuration Structure definition
*/
typedef struct
{
uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
This parameter can be a value of @ref RTC_Hour_Formats */
uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
This parameter can be a value of @ref RTCEx_Output_selection_Definitions */
uint32_t OutPutRemap; /*!< Specifies the remap for RTC output.
This parameter can be a value of @ref RTC_Output_ALARM_OUT_Remap */
uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
This parameter is dedicated to the PC13 configuration.
This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
}RTC_InitTypeDef;
/**
* @brief RTC Time structure definition
*/
typedef struct
{
uint8_t Hours; /*!< Specifies the RTC Time Hour.
This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
This parameter can be a value of @ref RTC_AM_PM_Definitions */
uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content.
This parameter corresponds to a time unit range between [0-1] Second
with [1 Sec / SecondFraction +1] granularity */
uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content
corresponding to Synchronous pre-scaler factor value (PREDIV_S)
This parameter corresponds to a time unit range between [0-1] Second
with [1 Sec / SecondFraction +1] granularity.
This field will be used only by HAL_RTC_GetTime function */
uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
in CR register to store the operation.
This parameter can be a value of @ref RTC_StoreOperation_Definitions */
}RTC_TimeTypeDef;
/**
* @brief RTC Date structure definition
*/
typedef struct
{
uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
This parameter can be a value of @ref RTC_WeekDay_Definitions */
uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
This parameter can be a value of @ref RTC_Month_Date_Definitions */
uint8_t Date; /*!< Specifies the RTC Date.
This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
uint8_t Year; /*!< Specifies the RTC Date Year.
This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
}RTC_DateTypeDef;
/**
* @brief RTC Alarm structure definition
*/
typedef struct
{
RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
This parameter can be a value of @ref RTC_AlarmMask_Definitions */
uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
uint32_t Alarm; /*!< Specifies the alarm .
This parameter can be a value of @ref RTC_Alarms_Definitions */
}RTC_AlarmTypeDef;
/**
* @brief RTC Handle Structure definition
*/
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
typedef struct __RTC_HandleTypeDef
#else
typedef struct
#endif
{
RTC_TypeDef *Instance; /*!< Register base address */
RTC_InitTypeDef Init; /*!< RTC required parameters */
HAL_LockTypeDef Lock; /*!< RTC locking object */
__IO HAL_RTCStateTypeDef State; /*!< Time communication state */
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
void (* AlarmAEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Alarm A Event callback */
void (* AlarmBEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Alarm B Event callback */
void (* TimeStampEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC TimeStamp Event callback */
void (* WakeUpTimerEventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC WakeUpTimer Event callback */
void (* Tamper1EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 1 Event callback */
void (* Tamper2EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 2 Event callback */
void (* Tamper3EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 3 Event callback */
void (* MspInitCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Msp Init callback */
void (* MspDeInitCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Msp DeInit callback */
#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
}RTC_HandleTypeDef;
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
/**
* @brief HAL LPTIM Callback ID enumeration definition
*/
typedef enum
{
HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00U, /*!< RTC Alarm A Event Callback ID */
HAL_RTC_ALARM_B_EVENT_CB_ID = 0x01U, /*!< RTC Alarm B Event Callback ID */
HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02U, /*!< RTC TimeStamp Event Callback ID */
HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03U, /*!< RTC WakeUp Timer Event Callback ID */
#if defined(RTC_TAMPER1_SUPPORT)
HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04U, /*!< RTC Tamper 1 Callback ID */
#endif
HAL_RTC_TAMPER2_EVENT_CB_ID = 0x05U, /*!< RTC Tamper 2 Callback ID */
#if defined(RTC_TAMPER3_SUPPORT)
HAL_RTC_TAMPER3_EVENT_CB_ID = 0x06U, /*!< RTC Tamper 3 Callback ID */
#endif
HAL_RTC_MSPINIT_CB_ID = 0x0EU, /*!< RTC Msp Init callback ID */
HAL_RTC_MSPDEINIT_CB_ID = 0x0FU /*!< RTC Msp DeInit callback ID */
}HAL_RTC_CallbackIDTypeDef;
/**
* @brief HAL RTC Callback pointer definition
*/
typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef * hrtc); /*!< pointer to an RTC callback function */
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTC_Exported_Constants RTC Exported Constants
* @{
*/
/** @defgroup RTC_Hour_Formats RTC Hour Formats
* @{
*/
#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000U)
#define RTC_HOURFORMAT_12 ((uint32_t)RTC_CR_FMT)
/**
* @}
*/
/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
* @{
*/
#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000U)
#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)RTC_CR_POL)
/**
* @}
*/
/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
* @{
*/
#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000U)
#if defined(RTC_OR_ALARMOUTTYPE)
#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)RTC_OR_ALARMOUTTYPE)
#endif
/**
* @}
*/
/** @defgroup RTC_Output_ALARM_OUT_Remap RTC Output ALARM OUT Remap
* @{
*/
#define RTC_OUTPUT_REMAP_NONE ((uint32_t)0x00000000U)
#define RTC_OUTPUT_REMAP_POS1 ((uint32_t)RTC_OR_OUT_RMP)
/**
* @}
*/
/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
* @{
*/
#define RTC_HOURFORMAT12_AM ((uint8_t)0x00U)
#define RTC_HOURFORMAT12_PM ((uint8_t)0x40U)
/**
* @}
*/
/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions
* @{
*/
#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)RTC_CR_SUB1H)
#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)RTC_CR_ADD1H)
#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000U)
/**
* @}
*/
/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions
* @{
*/
#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000U)
#define RTC_STOREOPERATION_SET ((uint32_t)RTC_CR_BKP)
/**
* @}
*/
/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
* @{
*/
#define RTC_FORMAT_BIN ((uint32_t)0x000000000U)
#define RTC_FORMAT_BCD ((uint32_t)0x000000001U)
/**
* @}
*/
/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
* @{
*/
/* Coded in BCD format */
#define RTC_MONTH_JANUARY ((uint8_t)0x01U)
#define RTC_MONTH_FEBRUARY ((uint8_t)0x02U)
#define RTC_MONTH_MARCH ((uint8_t)0x03U)
#define RTC_MONTH_APRIL ((uint8_t)0x04U)
#define RTC_MONTH_MAY ((uint8_t)0x05U)
#define RTC_MONTH_JUNE ((uint8_t)0x06U)
#define RTC_MONTH_JULY ((uint8_t)0x07U)
#define RTC_MONTH_AUGUST ((uint8_t)0x08U)
#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09U)
#define RTC_MONTH_OCTOBER ((uint8_t)0x10U)
#define RTC_MONTH_NOVEMBER ((uint8_t)0x11U)
#define RTC_MONTH_DECEMBER ((uint8_t)0x12U)
/**
* @}
*/
/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
* @{
*/
#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01U)
#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U)
#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U)
#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U)
#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U)
#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U)
#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U)
/**
* @}
*/
/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions
* @{
*/
#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000U)
#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL
/**
* @}
*/
/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions
* @{
*/
#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000U)
#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
#define RTC_ALARMMASK_ALL ((uint32_t) (RTC_ALARMMASK_NONE | \
RTC_ALARMMASK_DATEWEEKDAY | \
RTC_ALARMMASK_HOURS | \
RTC_ALARMMASK_MINUTES | \
RTC_ALARMMASK_SECONDS))
/**
* @}
*/
/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
* @{
*/
#define RTC_ALARM_A RTC_CR_ALRAE
#define RTC_ALARM_B RTC_CR_ALRBE
/**
* @}
*/
/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
* @{
*/
#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000U) /*!< All Alarm SS fields are masked.
There is no comparison on sub seconds
for Alarm */
#define RTC_ALARMSUBSECONDMASK_SS14_1 RTC_ALRMASSR_MASKSS_0 /*!< SS[14:1] are don't care in Alarm
comparison. Only SS[0] is compared. */
#define RTC_ALARMSUBSECONDMASK_SS14_2 RTC_ALRMASSR_MASKSS_1 /*!< SS[14:2] are don't care in Alarm
comparison. Only SS[1:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t) (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1)) /*!< SS[14:3] are don't care in Alarm
comparison. Only SS[2:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_4 RTC_ALRMASSR_MASKSS_2 /*!< SS[14:4] are don't care in Alarm
comparison. Only SS[3:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t) (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2)) /*!< SS[14:5] are don't care in Alarm
comparison. Only SS[4:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t) (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2)) /*!< SS[14:6] are don't care in Alarm
comparison. Only SS[5:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t) (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2)) /*!< SS[14:7] are don't care in Alarm
` comparison. Only SS[6:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_8 RTC_ALRMASSR_MASKSS_3 /*!< SS[14:8] are don't care in Alarm
comparison. Only SS[7:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t) (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3)) /*!< SS[14:9] are don't care in Alarm
comparison. Only SS[8:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t) (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3)) /*!< SS[14:10] are don't care in Alarm
comparison. Only SS[9:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t) (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3)) /*!< SS[14:11] are don't care in Alarm
comparison. Only SS[10:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t) (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3)) /*!< SS[14:12] are don't care in Alarm
comparison.Only SS[11:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t) (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3)) /*!< SS[14:13] are don't care in Alarm
comparison. Only SS[12:0] are compared */
#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t) (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3)) /*!< SS[14] is don't care in Alarm
comparison.Only SS[13:0] are compared */
#define RTC_ALARMSUBSECONDMASK_NONE RTC_ALRMASSR_MASKSS /*!< SS[14:0] are compared and must match
to activate alarm. */
/**
* @}
*/
/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
* @{
*/
#define RTC_IT_TS ((uint32_t)RTC_CR_TSIE) /*!< Enable Timestamp Interrupt */
#define RTC_IT_WUT ((uint32_t)RTC_CR_WUTIE) /*!< Enable Wakeup timer Interrupt */
#define RTC_IT_ALRA ((uint32_t)RTC_CR_ALRAIE) /*!< Enable Alarm A Interrupt */
#define RTC_IT_ALRB ((uint32_t)RTC_CR_ALRBIE) /*!< Enable Alarm B Interrupt */
#define RTC_IT_TAMP ((uint32_t)RTC_TAMPCR_TAMPIE) /*!< Enable all Tamper Interrupt */
#if defined(RTC_TAMPER1_SUPPORT)
#define RTC_IT_TAMP1 ((uint32_t)RTC_TAMPCR_TAMP1IE) /*!< Enable Tamper 1 Interrupt */
#endif
#define RTC_IT_TAMP2 ((uint32_t)RTC_TAMPCR_TAMP2IE) /*!< Enable Tamper 2 Interrupt */
/**
* @}
*/
/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
* @{
*/
#define RTC_FLAG_RECALPF ((uint32_t)RTC_ISR_RECALPF)
#define RTC_FLAG_TAMP2F ((uint32_t)RTC_ISR_TAMP2F)
#if defined(RTC_TAMPER1_SUPPORT)
#define RTC_FLAG_TAMP1F ((uint32_t)RTC_ISR_TAMP1F)
#endif
#define RTC_FLAG_TSOVF ((uint32_t)RTC_ISR_TSOVF)
#define RTC_FLAG_TSF ((uint32_t)RTC_ISR_TSF)
#if defined(RTC_ISR_ITSF)
#define RTC_FLAG_ITSF ((uint32_t)RTC_ISR_ITSF)
#endif
#define RTC_FLAG_WUTF ((uint32_t)RTC_ISR_WUTF)
#define RTC_FLAG_ALRBF ((uint32_t)RTC_ISR_ALRBF)
#define RTC_FLAG_ALRAF ((uint32_t)RTC_ISR_ALRAF)
#define RTC_FLAG_INITF ((uint32_t)RTC_ISR_INITF)
#define RTC_FLAG_RSF ((uint32_t)RTC_ISR_RSF)
#define RTC_FLAG_INITS ((uint32_t)RTC_ISR_INITS)
#define RTC_FLAG_SHPF ((uint32_t)RTC_ISR_SHPF)
#define RTC_FLAG_WUTWF ((uint32_t)RTC_ISR_WUTWF)
#define RTC_FLAG_ALRBWF ((uint32_t)RTC_ISR_ALRBWF)
#define RTC_FLAG_ALRAWF ((uint32_t)RTC_ISR_ALRAWF)
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup RTC_Exported_Macros RTC Exported Macros
* @{
*/
/** @brief Reset RTC handle state
* @param __HANDLE__ RTC handle.
* @retval None
*/
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\
(__HANDLE__)->State = HAL_RTC_STATE_RESET;\
(__HANDLE__)->MspInitCallback = NULL;\
(__HANDLE__)->MspDeInitCallback = NULL;\
}while(0)
#else
#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
/**
* @brief Disable the write protection for RTC registers.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
do{ \
(__HANDLE__)->Instance->WPR = 0xCAU; \
(__HANDLE__)->Instance->WPR = 0x53U; \
} while(0U)
/**
* @brief Enable the write protection for RTC registers.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
do{ \
(__HANDLE__)->Instance->WPR = 0xFFU; \
} while(0U)
/**
* @brief Enable the RTC ALARMA peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
/**
* @brief Disable the RTC ALARMA peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
/**
* @brief Enable the RTC ALARMB peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
/**
* @brief Disable the RTC ALARMB peripheral.
* @param __HANDLE__ specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
/**
* @brief Enable the RTC Alarm interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @arg RTC_IT_ALRB: Alarm B interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
/**
* @brief Disable the RTC Alarm interrupt.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @arg RTC_IT_ALRB: Alarm B interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified RTC Alarm interrupt has occurred or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check.
* This parameter can be:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @arg RTC_IT_ALRB: Alarm B interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4U)) != 0U)? 1U : 0U)
/**
* @brief Check whether the specified RTC Alarm interrupt has been enabled or not.
* @param __HANDLE__ specifies the RTC handle.
* @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check.
* This parameter can be:
* @arg RTC_IT_ALRA: Alarm A interrupt
* @arg RTC_IT_ALRB: Alarm B interrupt
* @retval None
*/
#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)
/**
* @brief Get the selected RTC Alarm's flag status.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC Alarm Flag sources to check.
* This parameter can be:
* @arg RTC_FLAG_ALRAF
* @arg RTC_FLAG_ALRBF
* @arg RTC_FLAG_ALRAWF
* @arg RTC_FLAG_ALRBWF
* @retval None
*/
#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U)
/**
* @brief Clear the RTC Alarm's pending flags.
* @param __HANDLE__ specifies the RTC handle.
* @param __FLAG__ specifies the RTC Alarm Flag sources to clear.
* This parameter can be:
* @arg RTC_FLAG_ALRAF
* @arg RTC_FLAG_ALRBF
* @retval None
*/
#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT) | ((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
/**
* @brief Enable interrupt on the RTC Alarm associated Exti line by core 1.
* @retval None
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Enable interrupt on the RTC Alarm associated Exti line by core 2.
* @retval None
*/
#define __HAL_RTC_ALARM_EXTIC2_ENABLE_IT() (EXTI->C2IMR1 |= RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable interrupt on the RTC Alarm associated Exti line by core 1.
* @retval None
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Disable interrupt on the RTC Alarm associated Exti line by core 2.
* @retval None
*/
#define __HAL_RTC_ALARM_EXTIC2_DISABLE_IT() (EXTI->C2IMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Enable event on the RTC Alarm associated Exti line by core 1.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Enable event on the RTC Alarm associated Exti line by core 2.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTIC2_ENABLE_EVENT() (EXTI->C2EMR1 |= RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable event on the RTC Alarm associated Exti line by core 1.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Disable event on the RTC Alarm associated Exti line by core 2.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTIC2_DISABLE_EVENT() (EXTI->C2EMR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT))
/*----------------------------*/
/**
* @brief Enable falling edge trigger on the RTC Alarm associated Exti line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable falling edge trigger on the RTC Alarm associated Exti line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Enable rising edge trigger on the RTC Alarm associated Exti line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Disable rising edge trigger on the RTC Alarm associated Exti line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \
__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE(); \
__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or notby core 1.
* @retval Line Status.
*/
#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not by core 2.
* @retval Line Status.
*/
#define __HAL_RTC_ALARM_EXTIC2_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_ALARM_EVENT)
/**
* @brief Clear the RTC Alarm associated Exti line flag.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR1 = (RTC_EXTI_LINE_ALARM_EVENT))
/**
* @brief Clear the RTC Alarm associated Exti line flag.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTIC2_CLEAR_FLAG() (EXTI->PR1 = (RTC_EXTI_LINE_ALARM_EVENT))
/*----------------------------*/
/**
* @brief Generate a Software interrupt on RTC Alarm associated Exti line.
* @retval None.
*/
#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_ALARM_EVENT)
/*----------------------------*/
/**
* @}
*/
/* Include RTC HAL Extended module */
#include "stm32wbxx_hal_rtc_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @defgroup RTC_Exported_Functions RTC Exported Functions
* @{
*/
/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
* @{
*/
/* RTC Time and Date functions ************************************************/
HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
/**
* @}
*/
/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
* @{
*/
/* RTC Alarm functions ********************************************************/
HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
/**
* @}
*/
/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
* @{
*/
/* Peripheral State functions *************************************************/
HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup RTC_Private_Constants RTC Private Constants
* @{
*/
/* Masks Definition */
#define RTC_TR_RESERVED_MASK ((uint32_t) (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | \
RTC_TR_MNT | RTC_TR_MNU| RTC_TR_ST | \
RTC_TR_SU))
#define RTC_DR_RESERVED_MASK ((uint32_t) (RTC_DR_YT | RTC_DR_YU | RTC_DR_WDU | \
RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | \
RTC_DR_DU))
#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFFU)
#define RTC_RSF_MASK ((uint32_t)~(RTC_ISR_INIT | RTC_ISR_RSF))
#define RTC_TIMEOUT_VALUE 1000U
#define RTC_EXTI_LINE_ALARM_EVENT (LL_EXTI_LINE_17) /*!< External interrupt line connected to the RTC Alarm event */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup RTC_Private_Macros RTC Private Macros
* @{
*/
/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
* @{
*/
#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
((FORMAT) == RTC_HOURFORMAT_24))
#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
((POL) == RTC_OUTPUT_POLARITY_LOW))
#if defined(RTC_OUTPUT_TYPE_PUSHPULL)
#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
#else
#define IS_RTC_OUTPUT_TYPE(TYPE) ((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN)
#endif
#define IS_RTC_OUTPUT_REMAP(REMAP) (((REMAP) == RTC_OUTPUT_REMAP_NONE) || \
((REMAP) == RTC_OUTPUT_REMAP_POS1))
#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \
((PM) == RTC_HOURFORMAT12_PM))
#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
((SAVE) == RTC_DAYLIGHTSAVING_NONE))
#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
((OPERATION) == RTC_STOREOPERATION_SET))
#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99U)
#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1U) && ((MONTH) <= (uint32_t)12U))
#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1U) && ((DATE) <= (uint32_t)31U))
#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t)0U) && ((DATE) <= (uint32_t)31U))
#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
#define IS_RTC_ALARM_MASK(MASK) (((MASK) & ~(RTC_ALARMMASK_ALL)) == 0U)
#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS)
#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FU)
#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFFU)
#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0U) && ((HOUR) <= (uint32_t)12U))
#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23U)
#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59U)
#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59U)
/**
* @}
*/
/**
* @}
*/
/* Private functions -------------------------------------------------------------*/
/** @defgroup RTC_Private_Functions RTC Private Functions
* @{
*/
HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
uint8_t RTC_ByteToBcd2(uint8_t Value);
uint8_t RTC_Bcd2ToByte(uint8_t Value);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32WBxx_HAL_RTC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1335
nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc_ex.h

File diff suppressed because it is too large

1868
nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c

File diff suppressed because it is too large

1912
nucleo-wb55-zigbee/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c

File diff suppressed because it is too large

162
nucleo-wb55-zigbee/nucleo-wb55-zigbee.ioc

@ -1,156 +1,173 @@
#MicroXplorer Configuration settings - do not modify
Mcu.Family=STM32WB
ProjectManager.MainLocation=Core/Src
PCC.Ble.Mode=NOT_SELECTED
RCC.PLLQoutputFreq_Value=128000000
RCC.USART1Freq_Value=32000000
ProjectManager.ProjectFileName=nucleo-wb55-zigbee.ioc
RCC.SAI1Freq_Value=128000000
RCC.CortexFreq_Value=32000000
ProjectManager.KeepUserCode=true
Mcu.UserName=STM32WB55RGVx
Mcu.PinsNb=19
ProjectManager.NoMain=false
RCC.RFWKPFreq_Value=976.5625
RCC.SMPSCLockSelectionVirtualVirtual=RCC_SMPSCLKSOURCE_HSI
PC13.Locked=true
RCC.HCLK3Freq_Value=32000000
PC13.Signal=SYS_WKUP2
RCC.PLLSAI1RoutputFreq_Value=128000000
PA14.GPIO_Label=JTCK
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false
PC4.Signal=GPIO_Input
PD0.GPIO_Label=B2 [Push Button]
PD1.Signal=GPIO_Input
ProjectManager.DefaultFWLocation=true
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
PB0.GPIO_Label=LED_GREEN
PB6.GPIO_Label=STLINK_RX
OSC_IN.Locked=true
PD0.Locked=true
ProjectManager.DeletePrevious=true
RCC.HCLK2Freq_Value=32000000
PC14-OSC32_IN.Signal=RCC_OSC32_IN
boardIOC=true
PinOutPanel.RotationAngle=0
RCC.FamilyName=M
RCC.MCO1PinFreq_Value=32000000
ProjectManager.StackSize=0x400
PB5.GPIOParameters=GPIO_Label
RCC.I2C3Freq_Value=32000000
RCC.LPTIM1Freq_Value=32000000
PA13.Signal=SYS_JTMS-SWDIO
RCC.FCLKCortexFreq_Value=32000000
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
Mcu.IP2=SYS
Mcu.IP2=RTC
Mcu.IP3=SYS
Mcu.IP0=NVIC
PA11.Locked=true
PA12.Locked=true
Mcu.IP1=RCC
PA12.Signal=USB_DP
PC15-OSC32_OUT.Locked=true
Mcu.UserConstants=
RCC.VCOSAI1OutputFreq_Value=256000000
ProjectManager.TargetToolchain=STM32CubeIDE
Mcu.ThirdPartyNb=0
PB7.GPIOParameters=GPIO_Label
RCC.HCLKFreq_Value=32000000
Mcu.IPNb=3
RCC.HCLKRFFreq_Value=16000000
Mcu.IPNb=4
ProjectManager.PreviousToolchain=
RCC.APB2TimFreq_Value=32000000
PCC.Ble.PowerLevel=Min
PB6.Signal=USART1_TX
PB5.Locked=true
Mcu.Pin6=PB0
PD0.Signal=GPIO_Input
Mcu.Pin7=PB1
ProjectManager.RegisterCallBack=
OSC_IN.Signal=RCC_OSC_IN
Mcu.Pin8=PA11
RCC.USBFreq_Value=128000000
Mcu.Pin9=PA12
RCC.LSE_VALUE=32768
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
OSC_OUT.Signal=RCC_OSC_OUT
RCC.AHBFreq_Value=32000000
RCC.PLLSAI1PoutputFreq_Value=128000000
PB1.Locked=true
Mcu.Pin0=PC13
Mcu.Pin1=PC14-OSC32_IN
Mcu.Pin2=PC15-OSC32_OUT
Mcu.Pin3=PC4
Mcu.Pin4=OSC_OUT
Mcu.Pin5=OSC_IN
RCC.SMPSCLockSelectionVirtual=RCC_SMPSCLKSOURCE_HSI
ProjectManager.ProjectBuild=false
RCC.HSE_VALUE=32000000
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
RCC.FCLK2Freq_Value=32000000
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
board=P-NUCLEO-WB55-Nucleo
RCC.Cortex2Freq_Value=32000000
RCC.VCOOutputFreq_Value=256000000
PD1.GPIOParameters=GPIO_Label
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
ProjectManager.LastFirmware=true
RCC.SMPS1Freq_Value=16000000
PD1.GPIOParameters=GPIO_Label
PD1.GPIO_Label=B3 [Push Button]
ProjectManager.FirmwarePackage=STM32Cube FW_WB V1.11.1
MxDb.Version=DB.6.0.21
PB0.GPIOParameters=GPIO_Label
RCC.APB2Freq_Value=32000000
ProjectManager.BackupPrevious=false
MxCube.Version=6.2.1
RCC.VCOInputFreq_Value=32000000
PCC.Ble.DataLength=6
PC4.GPIO_Label=B1 [Push Button]
RCC.I2C1Freq_Value=32000000
RCC.RNGFreq_Value=32000
PB1.GPIO_Label=LED_RED
RCC.PLLSAI1QoutputFreq_Value=128000000
RCC.ADCFreq_Value=128000000
File.Version=6
VP_SYS_VS_Systick.Mode=SysTick
PB3.GPIOParameters=GPIO_Label
PB7.Signal=USART1_RX
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
OSC_OUT.Locked=true
RCC.PLLRCLKFreq_Value=128000000
PB6.Locked=true
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
PB6.GPIOParameters=GPIO_Label
ProjectManager.HalAssertFull=false
PB0.Locked=true
ProjectManager.ProjectName=nucleo-wb55-zigbee
RCC.APB3Freq_Value=16000000
PA13.GPIOParameters=GPIO_Label
PB7.GPIO_Label=STLINK_TX
Mcu.Package=VFQFPN68
PB1.Signal=GPIO_Output
PA14.Locked=true
ProjectManager.ToolChainLocation=
RCC.LSI_VALUE=32000
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
RCC.LSCOPinFreq_Value=32000
PB5.GPIO_Label=LED_BLUE
RCC.PLLPoutputFreq_Value=128000000
RCC.APB1TimFreq_Value=32000000
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
PC4.Locked=true
RCC.LPUART1Freq_Value=32000000
RCC.SMPSDivider=1
ProjectManager.CustomerFirmwarePackage=
PC4.GPIOParameters=GPIO_Label
PC14-OSC32_IN.Locked=true
RCC.MSIClockRange=RCC_MSIRANGE_10
RCC.HSI48_VALUE=48000000
PB3.Locked=true
PB3.GPIO_Label=JTDO
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
PCC.Ble.Mode=NOT_SELECTED
RCC.PLLQoutputFreq_Value=128000000
ProjectManager.ProjectFileName=nucleo-wb55-zigbee.ioc
Mcu.PinsNb=20
ProjectManager.NoMain=false
PC13.Locked=true
RCC.HCLK3Freq_Value=32000000
PC13.Signal=SYS_WKUP2
PC4.Signal=GPIO_Input
PD1.Signal=GPIO_Input
ProjectManager.DefaultFWLocation=true
OSC_IN.Locked=true
ProjectManager.DeletePrevious=true
RCC.HCLK2Freq_Value=32000000
PC14-OSC32_IN.Signal=RCC_OSC32_IN
boardIOC=true
RCC.FamilyName=M
PA13.Signal=SYS_JTMS-SWDIO
PA11.Locked=true
PC15-OSC32_OUT.Locked=true
ProjectManager.TargetToolchain=STM32CubeIDE
PB7.GPIOParameters=GPIO_Label
RCC.HCLKRFFreq_Value=16000000
PB5.Locked=true
ProjectManager.RegisterCallBack=
OSC_IN.Signal=RCC_OSC_IN
RCC.USBFreq_Value=128000000
RCC.LSE_VALUE=32768
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
RCC.PLLSAI1PoutputFreq_Value=128000000
PB1.Locked=true
RCC.SMPSCLockSelectionVirtual=RCC_SMPSCLKSOURCE_HSI
board=P-NUCLEO-WB55-Nucleo
RCC.Cortex2Freq_Value=32000000
RCC.VCOOutputFreq_Value=256000000
ProjectManager.LastFirmware=true
RCC.SMPS1Freq_Value=16000000
RCC.APB2Freq_Value=32000000
MxCube.Version=6.2.1
PCC.Ble.DataLength=6
RCC.I2C1Freq_Value=32000000
RCC.RNGFreq_Value=32000
RCC.PLLSAI1QoutputFreq_Value=128000000
RCC.ADCFreq_Value=128000000
VP_SYS_VS_Systick.Mode=SysTick
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
OSC_OUT.Locked=true
ProjectManager.FreePins=false
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,Cortex2Freq_Value,CortexFreq_Value,FCLK2Freq_Value,FCLKCortexFreq_Value,FamilyName,HCLK2Freq_Value,HCLK3Freq_Value,HCLKFreq_Value,HCLKRFFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,MSIClockRange,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PWRFreq_Value,RFWKPFreq_Value,RNGFreq_Value,SAI1Freq_Value,SMPS1Freq_Value,SMPSCLockSelectionVirtual,SMPSCLockSelectionVirtualVirtual,SMPSDivider,SYSCLKFreq_VALUE,USART1Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value
ProjectManager.AskForMigrate=true
Mcu.Name=STM32WB55RGVx
RCC.LPTIM2Freq_Value=32000000
PB6.GPIOParameters=GPIO_Label
ProjectManager.HalAssertFull=false
PB0.Locked=true
PA13.GPIO_Label=JTMS
ProjectManager.ProjectName=nucleo-wb55-zigbee
ProjectManager.UnderRoot=true
RCC.APB3Freq_Value=16000000
PA13.GPIOParameters=GPIO_Label
ProjectManager.CoupleFile=false
PB7.GPIO_Label=STLINK_TX
PB3.Signal=SYS_JTDO-SWO
RCC.SYSCLKFreq_VALUE=32000000
Mcu.Package=VFQFPN68
PB5.Signal=GPIO_Output
PB1.Signal=GPIO_Output
PCC.Ble.ConnectionInterval=1000.0
NVIC.ForceEnableDMAVector=true
KeepUserPlacement=false
PA14.GPIOParameters=GPIO_Label
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
PA13.Locked=true
PA14.Locked=true
ProjectManager.CompilerOptimize=6
ProjectManager.ToolChainLocation=
RCC.LSI_VALUE=32000
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
PA11.Signal=USB_DM
RCC.LSCOPinFreq_Value=32000
PA14.Signal=SYS_JTCK-SWCLK
ProjectManager.HeapSize=0x200
Mcu.Pin15=PB5
@ -158,35 +175,22 @@ NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
Mcu.Pin16=PB6
Mcu.Pin13=PD1
Mcu.Pin14=PB3
Mcu.Pin19=VP_SYS_VS_Systick
ProjectManager.ComputerToolchain=false
Mcu.Pin17=PB7
RCC.HSI_VALUE=16000000
Mcu.Pin18=VP_SYS_VS_Systick
Mcu.Pin18=VP_RTC_VS_RTC_Activate
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
Mcu.Pin11=PA14
PB5.GPIO_Label=LED_BLUE
Mcu.Pin12=PD0
PD0.GPIOParameters=GPIO_Label
RCC.PLLPoutputFreq_Value=128000000
Mcu.Pin10=PA13
PB7.Locked=true
RCC.APB1TimFreq_Value=32000000
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
RCC.PWRFreq_Value=32000000
PC4.Locked=true
RCC.LPUART1Freq_Value=32000000
RCC.APB1Freq_Value=32000000
PD1.Locked=true
RCC.SMPSDivider=1
PB0.Signal=GPIO_Output
ProjectManager.CustomerFirmwarePackage=
PC4.GPIOParameters=GPIO_Label
ProjectManager.DeviceId=STM32WB55RGVx
PC14-OSC32_IN.Locked=true
RCC.MSIClockRange=RCC_MSIRANGE_10
ProjectManager.LibraryCopy=1
RCC.HSI48_VALUE=48000000
PB3.Locked=true
PB1.GPIOParameters=GPIO_Label
PB3.GPIO_Label=JTDO
isbadioc=false

Loading…
Cancel
Save