usb: User USB echo is working

config: baudrate: 115200
data bits: 8
parity: None
Stop bits: 1

nucleo-wb55-usb/Core/Inc/main.h

@@ -58,28 +58,6 @@ void Error_Handler(void);
 /* USER CODE END EFP */
 
 /* Private defines -----------------------------------------------------------*/
-#define B1_Pin GPIO_PIN_4
-#define B1_GPIO_Port GPIOC
-#define LD2_Pin GPIO_PIN_0
-#define LD2_GPIO_Port GPIOB
-#define LD3_Pin GPIO_PIN_1
-#define LD3_GPIO_Port GPIOB
-#define JTMS_Pin GPIO_PIN_13
-#define JTMS_GPIO_Port GPIOA
-#define JTCK_Pin GPIO_PIN_14
-#define JTCK_GPIO_Port GPIOA
-#define B2_Pin GPIO_PIN_0
-#define B2_GPIO_Port GPIOD
-#define B3_Pin GPIO_PIN_1
-#define B3_GPIO_Port GPIOD
-#define JTDO_Pin GPIO_PIN_3
-#define JTDO_GPIO_Port GPIOB
-#define LD1_Pin GPIO_PIN_5
-#define LD1_GPIO_Port GPIOB
-#define STLINK_RX_Pin GPIO_PIN_6
-#define STLINK_RX_GPIO_Port GPIOB
-#define STLINK_TX_Pin GPIO_PIN_7
-#define STLINK_TX_GPIO_Port GPIOB
 /* USER CODE BEGIN Private defines */
 
 /* USER CODE END Private defines */

nucleo-wb55-usb/Core/Src/main.c

@@ -118,14 +118,19 @@ void SystemClock_Config(void)
   /** Initializes the RCC Oscillators according to the specified parameters
   * in the RCC_OscInitTypeDef structure.
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
+                              |RCC_OSCILLATORTYPE_LSE|RCC_OSCILLATORTYPE_MSI;
   RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
   RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.MSIState = RCC_MSI_ON;
   RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_6;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
   RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
-  RCC_OscInitStruct.PLL.PLLN = 12;
+  RCC_OscInitStruct.PLL.PLLN = 32;
   RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
   RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
   RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
@@ -145,14 +150,14 @@ void SystemClock_Config(void)
   RCC_ClkInitStruct.AHBCLK2Divider = RCC_SYSCLK_DIV2;
   RCC_ClkInitStruct.AHBCLK4Divider = RCC_SYSCLK_DIV1;
 
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
   {
     Error_Handler();
   }
   /** Initializes the peripherals clocks
   */
   PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_USB;
-  PeriphClkInitStruct.PLLSAI1.PLLN = 12;
+  PeriphClkInitStruct.PLLSAI1.PLLN = 24;
   PeriphClkInitStruct.PLLSAI1.PLLP = RCC_PLLP_DIV2;
   PeriphClkInitStruct.PLLSAI1.PLLQ = RCC_PLLQ_DIV2;
   PeriphClkInitStruct.PLLSAI1.PLLR = RCC_PLLR_DIV2;
@@ -167,6 +172,9 @@ void SystemClock_Config(void)
   /* USER CODE BEGIN Smps */
 
   /* USER CODE END Smps */
+  /** Enable MSI Auto calibration
+  */
+  HAL_RCCEx_EnableMSIPLLMode();
 }
 
 /**
@@ -176,43 +184,9 @@ void SystemClock_Config(void)
   */
 static void MX_GPIO_Init(void)
 {
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
 
   /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
   __HAL_RCC_GPIOA_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOB, LD2_Pin|LD3_Pin|LD1_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin : B1_Pin */
-  GPIO_InitStruct.Pin = B1_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : LD2_Pin LD3_Pin LD1_Pin */
-  GPIO_InitStruct.Pin = LD2_Pin|LD3_Pin|LD1_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : B2_Pin B3_Pin */
-  GPIO_InitStruct.Pin = B2_Pin|B3_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : STLINK_RX_Pin STLINK_TX_Pin */
-  GPIO_InitStruct.Pin = STLINK_RX_Pin|STLINK_TX_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
 }
 

nucleo-wb55-usb/STM32WB55RGVX_FLASH.ld

@@ -39,8 +39,8 @@ ENTRY(Reset_Handler)
 /* Highest address of the user mode stack */
 _estack = 0x20030000;    /* end of RAM */
 /* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0x200 ;  /* required amount of heap  */
+_Min_Heap_Size = 0x2000 ;  /* required amount of heap  */
-_Min_Stack_Size = 0x400 ; /* required amount of stack */
+_Min_Stack_Size = 0x4000 ; /* required amount of stack */
 
 /* Specify the memory areas */
 MEMORY

nucleo-wb55-usb/STM32WB55RGVX_RAM.ld

@@ -39,8 +39,8 @@ ENTRY(Reset_Handler)
 /* Highest address of the user mode stack */
 _estack = 0x20030000;    /* end of RAM */
 /* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0x200 ;  /* required amount of heap  */
+_Min_Heap_Size = 0x2000 ;  /* required amount of heap  */
-_Min_Stack_Size = 0x400 ; /* required amount of stack */
+_Min_Stack_Size = 0x4000 ; /* required amount of stack */
 
 /* Specify the memory areas */
 MEMORY

nucleo-wb55-usb/USB_Device/App/usbd_cdc_if.c

@@ -32,7 +32,7 @@
 
 /* USER CODE BEGIN PV */
 /* Private variables ---------------------------------------------------------*/
-
+uint8_t buffer[7];
 /* USER CODE END PV */
 
 /** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
@@ -221,10 +221,16 @@ static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length)
   /* 6      | bDataBits  |   1   | Number Data bits (5, 6, 7, 8 or 16).          */
   /*******************************************************************************/
     case CDC_SET_LINE_CODING:
+    	for (int i = 0; i< 7; i++) {
+    		buffer[i] = pbuf[i];
+    	}
 
     break;
 
     case CDC_GET_LINE_CODING:
+    	for (int i = 0; i< 7; i++) {
+    		pbuf[i] = buffer[i];
+    	}
 
     break;
 
@@ -264,6 +270,7 @@ static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len)
   /* USER CODE BEGIN 6 */
   USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
   USBD_CDC_ReceivePacket(&hUsbDeviceFS);
+  CDC_Transmit_FS(Buf, *Len);
   return (USBD_OK);
   /* USER CODE END 6 */
 }

nucleo-wb55-usb/nucleo-wb55-usb.ioc

@@ -1,211 +1,139 @@
 #MicroXplorer Configuration settings - do not modify
 Mcu.Family=STM32WB
 ProjectManager.MainLocation=Core/Src
+PCC.Ble.Mode=NOT_SELECTED
 USB_DEVICE.CLASS_NAME_FS=CDC
-RCC.USART1Freq_Value=48000000
+RCC.PLLQoutputFreq_Value=64000000
+RCC.USART1Freq_Value=64000000
+ProjectManager.ProjectFileName=nucleo-wb55-usb.ioc
 RCC.SAI1Freq_Value=48000000
-RCC.CortexFreq_Value=48000000
+RCC.CortexFreq_Value=64000000
 ProjectManager.KeepUserCode=true
 Mcu.UserName=STM32WB55RGVx
+Mcu.PinsNb=5
+ProjectManager.NoMain=false
+USB_DEVICE.VirtualModeFS=Cdc_FS
 RCC.RFWKPFreq_Value=244.140625
 RCC.SMPSCLockSelectionVirtualVirtual=RCC_SMPSCLKSOURCE_HSI
+RCC.HCLK3Freq_Value=64000000
 RCC.PLLSAI1RoutputFreq_Value=48000000
-PA14.GPIO_Label=JTCK
 ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USB_Device_Init-USB_DEVICE-false-HAL-false
-PD0.GPIO_Label=B2 [Push Button]
 PA11.Mode=Device
-PB0.GPIO_Label=LD2 [Green Led]
+ProjectManager.DefaultFWLocation=true
-PB6.GPIO_Label=STLINK_RX
+ProjectManager.DeletePrevious=true
-PD0.Locked=true
+RCC.HCLK2Freq_Value=32000000
+boardIOC=true
+USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS
+RCC.AHB2CLKDivider=RCC_SYSCLK_DIV2
 PinOutPanel.RotationAngle=0
-RCC.MCO1PinFreq_Value=48000000
+RCC.FamilyName=M
+RCC.MCO1PinFreq_Value=64000000
 RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-ProjectManager.StackSize=0x400
+ProjectManager.StackSize=0x4000
-PB5.GPIOParameters=GPIO_Label
+RCC.I2C3Freq_Value=64000000
-RCC.I2C3Freq_Value=48000000
+RCC.LPTIM1Freq_Value=64000000
-RCC.LPTIM1Freq_Value=48000000
 Mcu.IP4=USB_DEVICE
-RCC.FCLKCortexFreq_Value=48000000
+RCC.FCLKCortexFreq_Value=64000000
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 Mcu.IP2=SYS
 Mcu.IP3=USB
 Mcu.IP0=NVIC
-PA12.Locked=true
 Mcu.IP1=RCC
 PA12.Signal=USB_DP
 Mcu.UserConstants=
 RCC.VCOSAI1OutputFreq_Value=96000000
+ProjectManager.TargetToolchain=STM32CubeIDE
 Mcu.ThirdPartyNb=0
-RCC.HCLKFreq_Value=48000000
+RCC.HCLKFreq_Value=64000000
+VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
 Mcu.IPNb=5
+RCC.HCLKRFFreq_Value=4000000
 ProjectManager.PreviousToolchain=
-RCC.APB2TimFreq_Value=48000000
+RCC.APB2TimFreq_Value=64000000
 PCC.Ble.PowerLevel=Min
-PB6.Signal=USART1_TX
-Mcu.Pin6=PB0
-PD0.Signal=GPIO_Input
-Mcu.Pin7=PB1
-Mcu.Pin8=PA11
-OSC_OUT.Mode=HSE-External-Oscillator
-Mcu.Pin9=PA12
-OSC_OUT.Signal=RCC_OSC_OUT
-RCC.AHBFreq_Value=48000000
-Mcu.Pin0=PC13
-Mcu.Pin1=PC14-OSC32_IN
-Mcu.Pin2=PC15-OSC32_OUT
-Mcu.Pin3=PC4
-Mcu.Pin4=OSC_OUT
-Mcu.Pin5=OSC_IN
-ProjectManager.ProjectBuild=false
-RCC.HSE_VALUE=8000000
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-RCC.FCLK2Freq_Value=24000000
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-PD1.GPIOParameters=GPIO_Label
-PD1.GPIO_Label=B3 [Push Button]
-ProjectManager.FirmwarePackage=STM32Cube FW_WB V1.11.1
-MxDb.Version=DB.6.0.21
-PB0.GPIOParameters=GPIO_Label
-ProjectManager.BackupPrevious=false
-RCC.VCOInputFreq_Value=8000000
-PC4.GPIO_Label=B1 [Push Button]
-PB1.GPIO_Label=LD3 [Red Led]
-File.Version=6
-PB3.GPIOParameters=GPIO_Label
-PB7.Signal=USART1_RX
-RCC.PLLRCLKFreq_Value=48000000
-PB6.Locked=true
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PB6.GPIOParameters=GPIO_Label
-ProjectManager.HalAssertFull=false
-PB0.Locked=true
-ProjectManager.ProjectName=nucleo-wb55-usb
-RCC.APB3Freq_Value=4000000
-PA13.GPIOParameters=GPIO_Label
-PB7.GPIO_Label=STLINK_TX
-Mcu.Package=VFQFPN68
-PB1.Signal=GPIO_Output
-PA14.Locked=true
-ProjectManager.ToolChainLocation=
-RCC.LSI_VALUE=32000
-VP_SYS_VS_Systick.Signal=SYS_VS_Systick
-RCC.LSCOPinFreq_Value=32000
-VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS
-NVIC.USB_LP_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-PB5.GPIO_Label=LD1 [Blue Led]
-RCC.PLLPoutputFreq_Value=48000000
-RCC.APB1TimFreq_Value=48000000
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PC4.Locked=true
-RCC.LPUART1Freq_Value=48000000
-RCC.SMPSDivider=1
-ProjectManager.CustomerFirmwarePackage=
-PC4.GPIOParameters=GPIO_Label
-PC14-OSC32_IN.Locked=true
-RCC.MSIClockRange=RCC_MSIRANGE_10
-RCC.HSI48_VALUE=48000000
-PB3.Locked=true
-RCC.PLLSAI1N=12
-PB3.GPIO_Label=JTDO
-RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
-PCC.Ble.Mode=NOT_SELECTED
-RCC.PLLQoutputFreq_Value=48000000
-ProjectManager.ProjectFileName=nucleo-wb55-usb.ioc
-Mcu.PinsNb=20
-ProjectManager.NoMain=false
-USB_DEVICE.VirtualModeFS=Cdc_FS
-PC13.Locked=true
-RCC.HCLK3Freq_Value=48000000
-PC13.Signal=SYS_WKUP2
-PC4.Signal=GPIO_Input
-PD1.Signal=GPIO_Input
-ProjectManager.DefaultFWLocation=true
-OSC_IN.Locked=true
-ProjectManager.DeletePrevious=true
-RCC.HCLK2Freq_Value=24000000
-PC14-OSC32_IN.Signal=RCC_OSC32_IN
-boardIOC=true
-USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS
-RCC.AHB2CLKDivider=RCC_SYSCLK_DIV2
-RCC.FamilyName=M
-PA13.Signal=SYS_JTMS-SWDIO
-PA11.Locked=true
-PC15-OSC32_OUT.Locked=true
-ProjectManager.TargetToolchain=STM32CubeIDE
-PB7.GPIOParameters=GPIO_Label
-VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
-RCC.HCLKRFFreq_Value=4000000
-PB5.Locked=true
 ProjectManager.RegisterCallBack=
 OSC_IN.Signal=RCC_OSC_IN
 RCC.USBFreq_Value=48000000
 RCC.LSE_VALUE=32768
-PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+RCC.AHBFreq_Value=64000000
 RCC.PLLSAI1PoutputFreq_Value=48000000
-PB1.Locked=true
+Mcu.Pin0=OSC_IN
+Mcu.Pin1=PA11
+Mcu.Pin2=PA12
+Mcu.Pin3=VP_SYS_VS_Systick
+Mcu.Pin4=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
 RCC.SMPSCLockSelectionVirtual=RCC_SMPSCLKSOURCE_HSI
+ProjectManager.ProjectBuild=false
+RCC.HSE_VALUE=8000000
+RCC.FCLK2Freq_Value=32000000
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 board=P-NUCLEO-WB55-Nucleo
-RCC.Cortex2Freq_Value=24000000
+RCC.Cortex2Freq_Value=4000000
-RCC.VCOOutputFreq_Value=96000000
+RCC.VCOOutputFreq_Value=128000000
+RCC.Cortex2_Div=SYSTICK_CLKSOURCE_HCLK_DIV8
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 ProjectManager.LastFirmware=true
 RCC.SMPS1Freq_Value=16000000
-RCC.APB2Freq_Value=48000000
+ProjectManager.FirmwarePackage=STM32Cube FW_WB V1.11.1
+MxDb.Version=DB.6.0.21
+RCC.APB2Freq_Value=64000000
+ProjectManager.BackupPrevious=false
 MxCube.Version=6.2.1
+RCC.VCOInputFreq_Value=4000000
 PCC.Ble.DataLength=6
-RCC.I2C1Freq_Value=48000000
+RCC.I2C1Freq_Value=64000000
 RCC.RNGFreq_Value=32000
 RCC.PLLSAI1QoutputFreq_Value=48000000
 RCC.ADCFreq_Value=48000000
+File.Version=6
 VP_SYS_VS_Systick.Mode=SysTick
 NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-OSC_OUT.Locked=true
+RCC.PLLRCLKFreq_Value=64000000
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 ProjectManager.FreePins=false
-RCC.IPParameters=ADCFreq_Value,AHB2CLKDivider,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,Cortex2Freq_Value,CortexFreq_Value,FCLK2Freq_Value,FCLKCortexFreq_Value,FamilyName,HCLK2Freq_Value,HCLK3Freq_Value,HCLKFreq_Value,HCLKRFFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,MSIClockRange,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RFWKPFreq_Value,RNGFreq_Value,SAI1Freq_Value,SMPS1Freq_Value,SMPSCLockSelectionVirtual,SMPSCLockSelectionVirtualVirtual,SMPSDivider,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value
+RCC.IPParameters=ADCFreq_Value,AHB2CLKDivider,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,Cortex2Freq_Value,Cortex2_Div,CortexFreq_Value,FCLK2Freq_Value,FCLKCortexFreq_Value,FamilyName,HCLK2Freq_Value,HCLK3Freq_Value,HCLKFreq_Value,HCLKRFFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PWRFreq_Value,RFWKPFreq_Value,RNGFreq_Value,SAI1Freq_Value,SMPS1Freq_Value,SMPSCLockSelectionVirtual,SMPSCLockSelectionVirtualVirtual,SMPSDivider,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value
 ProjectManager.AskForMigrate=true
 Mcu.Name=STM32WB55RGVx
-RCC.LPTIM2Freq_Value=48000000
+RCC.LPTIM2Freq_Value=64000000
-PA13.GPIO_Label=JTMS
+ProjectManager.HalAssertFull=false
+ProjectManager.ProjectName=nucleo-wb55-usb
 ProjectManager.UnderRoot=true
+RCC.APB3Freq_Value=4000000
 ProjectManager.CoupleFile=false
-PB3.Signal=SYS_JTDO-SWO
+RCC.SYSCLKFreq_VALUE=64000000
-RCC.SYSCLKFreq_VALUE=48000000
+Mcu.Package=VFQFPN68
-PB5.Signal=GPIO_Output
 PA12.Mode=Device
 PCC.Ble.ConnectionInterval=1000.0
 NVIC.ForceEnableDMAVector=true
 KeepUserPlacement=false
-OSC_IN.Mode=HSE-External-Oscillator
+OSC_IN.Mode=HSE-External-Clock-Source
-PA14.GPIOParameters=GPIO_Label
 NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PA13.Locked=true
 ProjectManager.CompilerOptimize=6
+ProjectManager.ToolChainLocation=
+RCC.LSI_VALUE=32000
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 PA11.Signal=USB_DM
-PA14.Signal=SYS_JTCK-SWCLK
+RCC.LSCOPinFreq_Value=32000
-ProjectManager.HeapSize=0x200
+ProjectManager.HeapSize=0x2000
-Mcu.Pin15=PB5
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-Mcu.Pin16=PB6
+VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS
-Mcu.Pin13=PD1
+NVIC.USB_LP_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-Mcu.Pin14=PB3
-Mcu.Pin19=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
 ProjectManager.ComputerToolchain=false
-Mcu.Pin17=PB7
 RCC.HSI_VALUE=16000000
-Mcu.Pin18=VP_SYS_VS_Systick
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-Mcu.Pin11=PA14
+RCC.PLLPoutputFreq_Value=64000000
-Mcu.Pin12=PD0
+RCC.PLLN=32
-PD0.GPIOParameters=GPIO_Label
+RCC.APB1TimFreq_Value=64000000
-RCC.PLLN=12
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-Mcu.Pin10=PA13
+RCC.PWRFreq_Value=64000000
-PB7.Locked=true
+RCC.LPUART1Freq_Value=64000000
-RCC.PWRFreq_Value=48000000
+RCC.APB1Freq_Value=64000000
-RCC.APB1Freq_Value=48000000
+RCC.SMPSDivider=1
-PD1.Locked=true
-PB0.Signal=GPIO_Output
 USB_DEVICE.VirtualMode=Cdc
+ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DeviceId=STM32WB55RGVx
 ProjectManager.LibraryCopy=1
-PB1.GPIOParameters=GPIO_Label
+RCC.HSI48_VALUE=48000000
+RCC.PLLSAI1N=24
 isbadioc=false