/* USER CODE BEGIN Header */
/**
 ******************************************************************************
  * File Name          : app_entry.c
  * Description        : Entry application source file for STM32WPAN Middleware
 ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under Ultimate Liberty license
  * SLA0044, the "License"; You may not use this file except in compliance with
  * the License. You may obtain a copy of the License at:
  *                             www.st.com/SLA0044
  *
 ******************************************************************************
 */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "app_common.h"
#include "main.h"
#include "app_entry.h"
#include "app_zigbee.h"
#include "app_conf.h"
#include "hw_conf.h"
#include "stm32_seq.h"
#include "stm_logging.h"
#include "shci_tl.h"
#include "stm32_lpm.h"
#include "dbg_trace.h"
#include "shci.h"

/* Private includes -----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
extern RTC_HandleTypeDef hrtc;
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private defines -----------------------------------------------------------*/
/* POOL_SIZE = 2(TL_PacketHeader_t) + 258 (3(TL_EVT_HDR_SIZE) + 255(Payload size)) */
#define POOL_SIZE (CFG_TL_EVT_QUEUE_LENGTH * 4U * DIVC(( sizeof(TL_PacketHeader_t) + TL_EVENT_FRAME_SIZE ), 4U))

/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macros ------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/
PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t EvtPool[POOL_SIZE];
PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static TL_CmdPacket_t SystemCmdBuffer;
PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t SystemSpareEvtBuffer[sizeof(TL_PacketHeader_t) + TL_EVT_HDR_SIZE + 255U];

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Global function prototypes -----------------------------------------------*/
#if(CFG_DEBUG_TRACE != 0)
size_t DbgTraceWrite(int handle, const unsigned char * buf, size_t bufSize);
#endif

/* USER CODE BEGIN GFP */

/* USER CODE END GFP */

/* Private functions prototypes-----------------------------------------------*/
static void SystemPower_Config( void );
static void Init_Debug( void );
static void appe_Tl_Init( void );
static void APPE_SysStatusNot( SHCI_TL_CmdStatus_t status );
static void APPE_SysUserEvtRx( void * pPayload );
static void APPE_SysEvtReadyProcessing( void );
static void APPE_SysEvtError( SCHI_SystemErrCode_t ErrorCode);

#if (CFG_HW_LPUART1_ENABLED == 1)
extern void MX_LPUART1_UART_Init(void);
#endif
#if (CFG_HW_USART1_ENABLED == 1)
extern void MX_USART1_UART_Init(void);
#endif

/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Functions Definition ------------------------------------------------------*/
void APPE_Init( void )
{
  SystemPower_Config(); /**< Configure the system Power Mode */

  HW_TS_Init(hw_ts_InitMode_Full, &hrtc); /**< Initialize the TimerServer */

/* USER CODE BEGIN APPE_Init_1 */

/* USER CODE END APPE_Init_1 */
  appe_Tl_Init();	/* Initialize all transport layers */

  /**
   * From now, the application is waiting for the ready event ( VS_HCI_C2_Ready )
   * received on the system channel before starting the Stack
   * This system event is received with APPE_SysUserEvtRx()
   */
/* USER CODE BEGIN APPE_Init_2 */

/* USER CODE END APPE_Init_2 */
   return;
}
/* USER CODE BEGIN FD */

/* USER CODE END FD */

/*************************************************************
 *
 * LOCAL FUNCTIONS
 *
 *************************************************************/
static void Init_Debug( void )
{
#if (CFG_DEBUGGER_SUPPORTED == 1)
  /**
   * Keep debugger enabled while in any low power mode
   */
  HAL_DBGMCU_EnableDBGSleepMode();

  /***************** ENABLE DEBUGGER *************************************/
  LL_EXTI_EnableIT_32_63(LL_EXTI_LINE_48);
  LL_C2_EXTI_EnableIT_32_63(LL_EXTI_LINE_48);

#else

  GPIO_InitTypeDef gpio_config = {0};

  gpio_config.Pull = GPIO_NOPULL;
  gpio_config.Mode = GPIO_MODE_ANALOG;

  gpio_config.Pin = GPIO_PIN_15 | GPIO_PIN_14 | GPIO_PIN_13;
  __HAL_RCC_GPIOA_CLK_ENABLE();
  HAL_GPIO_Init(GPIOA, &gpio_config);
  __HAL_RCC_GPIOA_CLK_DISABLE();

  gpio_config.Pin = GPIO_PIN_4 | GPIO_PIN_3;
  __HAL_RCC_GPIOB_CLK_ENABLE();
  HAL_GPIO_Init(GPIOB, &gpio_config);
  __HAL_RCC_GPIOB_CLK_DISABLE();

  HAL_DBGMCU_DisableDBGSleepMode();
  HAL_DBGMCU_DisableDBGStopMode();
  HAL_DBGMCU_DisableDBGStandbyMode();

#endif /* (CFG_DEBUGGER_SUPPORTED == 1) */

#if(CFG_DEBUG_TRACE != 0)
  DbgTraceInit();
#endif

  return;
}

/**
 * @brief  Configure the system for power optimization
 *
 * @note  This API configures the system to be ready for low power mode
 *
 * @param  None
 * @retval None
 */
static void SystemPower_Config(void)
{
  /**
   * Select HSI as system clock source after Wake Up from Stop mode
   */
  LL_RCC_SetClkAfterWakeFromStop(LL_RCC_STOP_WAKEUPCLOCK_HSI);

  /* Initialize low power manager */
  UTIL_LPM_Init();
  /* Initialize the CPU2 reset value before starting CPU2 with C2BOOT */
  LL_C2_PWR_SetPowerMode(LL_PWR_MODE_SHUTDOWN);

#if (CFG_USB_INTERFACE_ENABLE != 0)
  /**
   *  Enable USB power
   */
  HAL_PWREx_EnableVddUSB();
#endif

  return;
}

static void appe_Tl_Init( void )
{
  TL_MM_Config_t tl_mm_config;
  SHCI_TL_HciInitConf_t SHci_Tl_Init_Conf;
  /**< Reference table initialization */
  TL_Init();

  /**< System channel initialization */
  UTIL_SEQ_RegTask( 1<< CFG_TASK_SYSTEM_HCI_ASYNCH_EVT, UTIL_SEQ_RFU, shci_user_evt_proc );
  SHci_Tl_Init_Conf.p_cmdbuffer = (uint8_t*)&SystemCmdBuffer;
  SHci_Tl_Init_Conf.StatusNotCallBack = APPE_SysStatusNot;
  shci_init(APPE_SysUserEvtRx, (void*) &SHci_Tl_Init_Conf);

  /**< Memory Manager channel initialization */
  tl_mm_config.p_BleSpareEvtBuffer = 0;
  tl_mm_config.p_SystemSpareEvtBuffer = SystemSpareEvtBuffer;
  tl_mm_config.p_AsynchEvtPool = EvtPool;
  tl_mm_config.AsynchEvtPoolSize = POOL_SIZE;
  TL_MM_Init( &tl_mm_config );

  TL_Enable();

  return;
}

static void APPE_SysStatusNot( SHCI_TL_CmdStatus_t status )
{
  UNUSED(status);
  return;
}

/**
 * The type of the payload for a system user event is tSHCI_UserEvtRxParam
 * When the system event is both :
 *    - a ready event (subevtcode = SHCI_SUB_EVT_CODE_READY)
 *    - reported by the FUS (sysevt_ready_rsp == FUS_FW_RUNNING)
 * The buffer shall not be released
 * ( eg ((tSHCI_UserEvtRxParam*)pPayload)->status shall be set to SHCI_TL_UserEventFlow_Disable )
 * When the status is not filled, the buffer is released by default
 */
static void APPE_SysUserEvtRx( void * pPayload )
{
  TL_AsynchEvt_t *p_sys_event;
  p_sys_event = (TL_AsynchEvt_t*)(((tSHCI_UserEvtRxParam*)pPayload)->pckt->evtserial.evt.payload);

  switch(p_sys_event->subevtcode)
  {
     case SHCI_SUB_EVT_CODE_READY:
         APPE_SysEvtReadyProcessing();
         break;
     case SHCI_SUB_EVT_ERROR_NOTIF:
         APPE_SysEvtError((SCHI_SystemErrCode_t) (p_sys_event->payload[0]));
         break;
     default:
         break;
  }
  return;
}

/**
 * @brief Notify a system error coming from the M0 firmware
 * @param  ErrorCode  : errorCode detected by the M0 firmware
 *
 * @retval None
 */
static void APPE_SysEvtError( SCHI_SystemErrCode_t ErrorCode)
{
  switch(ErrorCode)
  {
  case ERR_ZIGBEE_UNKNOWN_CMD:
       APP_DBG("** ERR_ZIGBEE : UNKNOWN_CMD \n");
       break;
  default:
       APP_DBG("** ERR_ZIGBEE : ErroCode=%d \n",ErrorCode);
       break;
  }
  return;
}

static void APPE_SysEvtReadyProcessing( void )
{
  /* Traces channel initialization */
  TL_TRACES_Init( );

  APP_ZIGBEE_Init();
  UTIL_LPM_SetOffMode(1U << CFG_LPM_APP, UTIL_LPM_ENABLE);
  return;
}

/* USER CODE BEGIN FD_LOCAL_FUNCTIONS */

/* USER CODE END FD_LOCAL_FUNCTIONS */

/*************************************************************
 *
 * WRAP FUNCTIONS
 *
 *************************************************************/

void UTIL_SEQ_Idle( void )
{
#if ( CFG_LPM_SUPPORTED == 1)
  UTIL_LPM_EnterLowPower( );
#endif
  return;
}

/**
  * @brief  This function is called by the scheduler each time an event
  *         is pending.
  *
  * @param  evt_waited_bm : Event pending.
  * @retval None
  */
void UTIL_SEQ_EvtIdle( UTIL_SEQ_bm_t task_id_bm, UTIL_SEQ_bm_t evt_waited_bm )
{
  switch(evt_waited_bm)
  {
  case EVENT_ACK_FROM_M0_EVT:
    /**
     * Run only the task CFG_TASK_REQUEST_FROM_M0_TO_M4 to process
     * direct requests from the M0 (e.g. ZbMalloc), but no stack notifications
     * until we're done the request to the M0.
     */
    UTIL_SEQ_Run((1U << CFG_TASK_REQUEST_FROM_M0_TO_M4));
    break;
  case EVENT_SYNCHRO_BYPASS_IDLE:
    UTIL_SEQ_SetEvt(EVENT_SYNCHRO_BYPASS_IDLE);
    /* Process notifications and requests from the M0 */
    UTIL_SEQ_Run((1U << CFG_TASK_NOTIFY_FROM_M0_TO_M4) | (1U << CFG_TASK_REQUEST_FROM_M0_TO_M4));
    break;
  default :
    /* default case */
  UTIL_SEQ_Run( UTIL_SEQ_DEFAULT );
    break;
  }
}

void shci_notify_asynch_evt(void* pdata)
{
  UNUSED(pdata);
  UTIL_SEQ_SetTask(1U << CFG_TASK_SYSTEM_HCI_ASYNCH_EVT, CFG_SCH_PRIO_0);
  return;
}

void shci_cmd_resp_release(uint32_t flag)
{
  UNUSED(flag);
  UTIL_SEQ_SetEvt(1U << CFG_EVT_SYSTEM_HCI_CMD_EVT_RESP);
  return;
}

void shci_cmd_resp_wait(uint32_t timeout)
{
  UNUSED(timeout);
  UTIL_SEQ_WaitEvt(1U << CFG_EVT_SYSTEM_HCI_CMD_EVT_RESP);
  return;
}

/* Received trace buffer from M0 */
void TL_TRACES_EvtReceived( TL_EvtPacket_t * hcievt )
{
#if(CFG_DEBUG_TRACE != 0)
  /* Call write/print function using DMA from dbg_trace */
  /* - Cast to TL_AsynchEvt_t* to get "real" payload (without Sub Evt code 2bytes),
     - (-2) to size to remove Sub Evt Code */
  DbgTraceWrite(1U, (const unsigned char *) ((TL_AsynchEvt_t *)(hcievt->evtserial.evt.payload))->payload, hcievt->evtserial.evt.plen - 2U);
#endif /* CFG_DEBUG_TRACE */
  /* Release buffer */
  TL_MM_EvtDone( hcievt );
}
/**
  * @brief  Initialisation of the trace mechanism
  * @param  None
  * @retval None
  */
#if(CFG_DEBUG_TRACE != 0)
void DbgOutputInit( void )
{
#ifdef CFG_DEBUG_TRACE_UART
  return;
#endif
}

/**
  * @brief  Management of the traces
  * @param  p_data : data
  * @param  size : size
  * @param  call-back :
  * @retval None
  */
void DbgOutputTraces(  uint8_t *p_data, uint16_t size, void (*cb)(void) )
{
  HW_UART_Transmit_DMA(CFG_DEBUG_TRACE_UART, p_data, size, cb);

  return;
}
#endif

/* USER CODE BEGIN FD_WRAP_FUNCTIONS */

/* USER CODE END FD_WRAP_FUNCTIONS */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/