zigbee: Enable RF, use HSE oscillator

nucleo-wb55-zigbee/Core/Src/main.c

@@ -40,6 +40,7 @@
 /* USER CODE END PM */
 
 /* Private variables ---------------------------------------------------------*/
+
 RTC_HandleTypeDef hrtc;
 
 /* USER CODE BEGIN PV */
@@ -50,6 +51,7 @@ RTC_HandleTypeDef hrtc;
 void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
 static void MX_RTC_Init(void);
+static void MX_RF_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -88,6 +90,7 @@ int main(void)
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
   MX_RTC_Init();
+  MX_RF_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -125,8 +128,9 @@ void SystemClock_Config(void)
   /** Initializes the RCC Oscillators according to the specified parameters
   * in the RCC_OscInitTypeDef structure.
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
-                              |RCC_OSCILLATORTYPE_MSI;
+                              |RCC_OSCILLATORTYPE_LSE|RCC_OSCILLATORTYPE_MSI;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
   RCC_OscInitStruct.LSEState = RCC_LSE_ON;
   RCC_OscInitStruct.HSIState = RCC_HSI_ON;
   RCC_OscInitStruct.MSIState = RCC_MSI_ON;
@@ -156,8 +160,10 @@ void SystemClock_Config(void)
   }
   /** Initializes the peripherals clocks
   */
-  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RTC;
+  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RFWAKEUP
+                              |RCC_PERIPHCLK_RTC;
   PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
+  PeriphClkInitStruct.RFWakeUpClockSelection = RCC_RFWKPCLKSOURCE_HSE_DIV1024;
   PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSI;
   PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE0;
   if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
@@ -169,6 +175,27 @@ void SystemClock_Config(void)
   /* USER CODE END Smps */
 }
 
+/**
+  * @brief RF Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_RF_Init(void)
+{
+
+  /* USER CODE BEGIN RF_Init 0 */
+
+  /* USER CODE END RF_Init 0 */
+
+  /* USER CODE BEGIN RF_Init 1 */
+
+  /* USER CODE END RF_Init 1 */
+  /* USER CODE BEGIN RF_Init 2 */
+
+  /* USER CODE END RF_Init 2 */
+
+}
+
 /**
   * @brief RTC Initialization Function
   * @param None

nucleo-wb55-zigbee/nucleo-wb55-zigbee.ioc

@@ -11,21 +11,22 @@ RCC.SAI1Freq_Value=128000000
 RCC.CortexFreq_Value=32000000
 ProjectManager.KeepUserCode=true
 Mcu.UserName=STM32WB55RGVx
-Mcu.PinsNb=11
+Mcu.PinsNb=14
+RF1.Signal=RF_RF1
 ProjectManager.NoMain=false
 RCC.RFWKPFreq_Value=976.5625
 RCC.SMPSCLockSelectionVirtualVirtual=RCC_SMPSCLKSOURCE_HSI
 RCC.HCLK3Freq_Value=32000000
 RCC.PLLSAI1RoutputFreq_Value=128000000
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_RTC_Init-RTC-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_RTC_Init-RTC-false-HAL-true,0-MX_HSEM_Init-HSEM-false-HAL-true
 PC4.Signal=GPIO_Input
 PD0.GPIO_Label=B2 [Push Button]
 VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
 PD1.Signal=GPIO_Input
 RCC.RTCFreq_Value=32768
 ProjectManager.DefaultFWLocation=true
-VP_HSEM_VS_HSEM.Signal=HSEM_VS_HSEM
 PB0.GPIO_Label=LED_GREEN
+VP_HSEM_VS_HSEM.Signal=HSEM_VS_HSEM
 PD0.Locked=true
 ProjectManager.DeletePrevious=true
 RCC.HCLK2Freq_Value=32000000
@@ -38,11 +39,12 @@ ProjectManager.StackSize=0x400
 PB5.GPIOParameters=GPIO_Label
 RCC.I2C3Freq_Value=32000000
 RCC.LPTIM1Freq_Value=32000000
-Mcu.IP4=SYS
+Mcu.IP4=RTC
 RCC.FCLKCortexFreq_Value=32000000
+Mcu.IP5=SYS
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 Mcu.IP2=RCC
-Mcu.IP3=RTC
+Mcu.IP3=RF
 Mcu.IP0=HSEM
 Mcu.IP1=NVIC
 Mcu.UserConstants=
@@ -50,29 +52,32 @@ RCC.VCOSAI1OutputFreq_Value=256000000
 ProjectManager.TargetToolchain=STM32CubeIDE
 Mcu.ThirdPartyNb=0
 RCC.HCLKFreq_Value=32000000
-Mcu.IPNb=5
+Mcu.IPNb=6
 RCC.HCLKRFFreq_Value=16000000
 ProjectManager.PreviousToolchain=
 RCC.APB2TimFreq_Value=32000000
 PCC.Ble.PowerLevel=Min
 PB5.Locked=true
+Mcu.Pin6=PB0
 PD0.Signal=GPIO_Input
-Mcu.Pin6=PD1
+Mcu.Pin7=PB1
-Mcu.Pin7=PB5
 ProjectManager.RegisterCallBack=
-Mcu.Pin8=VP_HSEM_VS_HSEM
+Mcu.Pin8=PD0
+OSC_IN.Signal=RCC_OSC_IN
 RCC.USBFreq_Value=128000000
-Mcu.Pin9=VP_RTC_VS_RTC_Activate
+OSC_OUT.Mode=HSE-External-Oscillator
+Mcu.Pin9=PD1
 PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+OSC_OUT.Signal=RCC_OSC_OUT
 RCC.AHBFreq_Value=32000000
 RCC.PLLSAI1PoutputFreq_Value=128000000
 Mcu.Pin0=PC14-OSC32_IN
 PB1.Locked=true
 Mcu.Pin1=PC15-OSC32_OUT
 Mcu.Pin2=PC4
-Mcu.Pin3=PB0
+Mcu.Pin3=RF1
-Mcu.Pin4=PB1
+Mcu.Pin4=OSC_OUT
-Mcu.Pin5=PD0
+Mcu.Pin5=OSC_IN
 RCC.SMPSCLockSelectionVirtual=RCC_SMPSCLKSOURCE_HSI
 ProjectManager.ProjectBuild=false
 RCC.HSE_VALUE=32000000
@@ -128,22 +133,27 @@ PB1.Signal=GPIO_Output
 PCC.Ble.ConnectionInterval=1000.0
 NVIC.ForceEnableDMAVector=true
 KeepUserPlacement=false
+OSC_IN.Mode=HSE-External-Oscillator
 NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 ProjectManager.CompilerOptimize=6
+RF1.Mode=RF1_Activate
 ProjectManager.ToolChainLocation=
 RCC.LSI_VALUE=32000
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 RCC.LSCOPinFreq_Value=32000
 ProjectManager.HeapSize=0x200
 NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+Mcu.Pin13=VP_SYS_VS_Systick
 ProjectManager.ComputerToolchain=false
 RCC.HSI_VALUE=16000000
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+Mcu.Pin11=VP_HSEM_VS_HSEM
+Mcu.Pin12=VP_RTC_VS_RTC_Activate
 VP_HSEM_VS_HSEM.Mode=HSEM_Activate
 PB5.GPIO_Label=LED_BLUE
 PD0.GPIOParameters=GPIO_Label
 RCC.PLLPoutputFreq_Value=128000000
-Mcu.Pin10=VP_SYS_VS_Systick
+Mcu.Pin10=PB5
 RCC.APB1TimFreq_Value=32000000
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 RCC.PWRFreq_Value=32000000